Epson Projector PowerLite Pro G6570WU User Manual

Setting
OptionsDescription
Date & Time —Adjusts the projectors system
time and date settings
Parent topic: Adjusting the Menu Settings
Projector Network Settings - Network Menu Settings on the Network menu let you view network information and set up the projector for monitoring
and control over a network.
191 

Setting
OptionsDescription
Net. Info - Wireless LAN Connection mode Displays wireless network status
and details
(PowerLite Pro Antenna level
G6070W/G6170/G6270W/ Projector Name
G6470WU/G6570WU/G6770WU
SSID
)
DHCP
IP Address
Subnet Mask
Gateway Address
MAC Address
Region Code
Net. Info - Wired LAN Projector NameDisplays wired network status
and details
DHCP
IP Address
Subnet Mask
Gateway Address
MAC Address
Network Configuration Accesses additional network Configures your network settings
menus
Parent...

Projector Information Display - Info Menu
You can display information about the projector and input sources by viewing the Info menu. However,
you cannot change any settings in the menu.
Note:The lamp usage timer does not register any hours until you have used the lamp for at least 10
hours. Available settings depend on the current input source.
193 

Setting
OptionsDescription
Projector Info Lamp HoursDisplays the number of hours (H)
the lamp has been used in
Normal andECO Power
Consumption modes; if the
information is displayed in yellow,
obtain a genuine Epson
replacement lamp soon
Source Displays the name of the port to
which the current input source is
connected
Input Signal Displays the input signal setting
of the current input source
Resolution Displays the resolution of the
current input source
Video Signal Displays the video signal format
of...

Parent topic:
Adjusting the Menu Settings
Related references
Optional Equipment and Replacement Parts
Projector Lamp Specifications
Event ID Code List If theEvent ID option on the Info menu displays a code number, check this list of Event ID codes for the
solution to the projector problem associated with the code.
Event ID code Cause and solution
0432 The EasyMP Network Projection program did not start. Turn the projector off and
then on again.
0435
0434 Unstable network communication. Check the network...

Event ID code Cause and solution
0898
Failed to acquire DHCP. Make sure the DHCP server is operating correctly. If you
are not using DHCP, turn off the DHCPsetting in the Network menus.
0899 Communication error. Restart the EasyMP Network Projection program.
089A The projectors EAP authentication type does not match the network. Check the
wireless LAN security settings and make sure that the security certificate is installed
correctly.
089B EAP server authentication failed. Check the wireless LAN...

You can also reset the projectors lamp usage timer to zero when you replace the lamp using the
Reset
Lamp Hours option, or reset the saved names and settings in the Save Memory list using the Reset
Memory option.
You cannot reset the following settings using the Reset Alloption:
• Input Signal
• Users Logo
• Language
• Network menu items
• Lamp Hours
• Password
• Multi-screen
• Date & Time
• Panel Alignment
• Color Uniformity
Parent topic: Adjusting the Menu Settings
197 

Maintaining and Transporting the Projector
Follow the instructions in these sections to maintain your projector and transport it from place to place.
Projector Maintenance
Transporting the Projector
Projector Maintenance Your projector needs little maintenance to keep working at its best.
You may need to clean the lens periodically, and clean the air filter and air vents to prevent the projector
from overheating due to blocked ventilation.
The only parts you should replace are the lamp, air filter, and...

• To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe the
lens. Do not spray any liquid directly on the lens.
Warning: Do not use a lens cleaner that contains flammable gas. The high heat generated by the
projector lamp may cause a fire.
Caution: Do not use glass cleaner or any harsh materials to clean the lens and do not subject the lens
to any impacts; you may damage it. Do not use canned air, or the gases may leave a residue. Avoid
touching the lens with your...

Cleaning the Air Filter
You need to clean the projectors air filter in the following situations:
• The filter or vents get dusty.
• You see a message telling you to clean it.
• The projectors filter light flashes green.
1. Turn off the projector and unplug the power cord.
2. Slide the air filter cover latch and open the air filter cover.
200