Epson Projector PowerLite Pro G6570WU User Manual

13. When you are finished, press the
Menubutton to exit.
Parent topic: Using Multiple Projectors
Matching the Image Colors You can match the display quality of multiple projectors that will project next to each other.
Note:Make sure you select Multi-Projectionor3D Multi-Projection (for 3D images) for the color
mode. Brightness and colors may not match exactly even after performing the steps below.
1. Press the Menubutton.
2. Select the Extendedmenu and press Enter.
3. Select the Multi-Projection setting...

11. Adjust the
Color Correct. settings for green-to-red ( G/R) and blue-to-yellow (B/Y) balance for all the
levels on both projectors in the same way.
12. If you need to match more projectors, repeat these steps matching projector 3 to projector 2, 4 to 3, and so on.
Parent topic: Using Multiple Projectors
Related concepts
Color Mode
Viewing 3D Images Using an optional polarizer and 3D glasses, you can use two projectors to project and view passive 3D
images. See the instructions supplied with the...

You see this screen:
5. Select one of the following options: •Load Memory: Overwrites your current settings with saved settings
• Save Memory: Saves your current settings to memory (10 memories with different names are
available)
Note: A memory name that has already been used is indicated by a green mark. Saving over a
previously saved memory overwrites the settings with your current settings.
• Erase Memory: Erases the selected memory settings
• Rename Memory: Renames a saved memory
6. Press Escto...

3. Select the
Schedule Settings setting and pressEnter.
The Schedule Settings screen appears.
4. Select the Schedulemenu and press Enter.
5. Select Add Newand press Enter.
6. In the Event Settings section, select the events you want to have occur. (Select No Changefor
events that you do not want to occur.)
7. In the Date/Time Settings section, set the date and time for the scheduled events to occur.
8. When you are finished, select Saveand press Enter.
9. To schedule more events, repeat the previous 4...

One-time event
Reoccurring event
Communication is on/off
Event is invalid
Parent topic: Saving a Scheduled Event
Editing a Scheduled Event You can edit any currently scheduled event.
1. Press theMenubutton.
2. Select the Extendedmenu and press Enter.
3. Select the Schedule Settings setting and pressEnter.
You see a screen like this:
4. Press the left or right arrow buttons to highlight the date on the calendar containing the scheduled event you want to edit.
5. Press the up or down arrow buttons to...

7. When you are finished, select
Returnand press Enter.
8. Select Setup complete and selectYesto save your changes.
Note: To delete all scheduled events, select Schedule Resetand selectYes.
Parent topic: Saving a Scheduled Event
Copying Menu Settings Between Projectors After you select menu settings for your projector, you can transfer them to another projector of the same
model.
Note:Copy the projectors settings before you adjust the projected image using the projectors
Geometric Correction settings....

Saving Settings to a USB Flash Drive
You can save the projector settings you want to transfer to a USB flash drive (PowerLite Pro
G6070W/G6170/G6270W/G6470WU/G6570WU/G6770WU).
Note:Use an empty flash drive. If the drive contains other files, the transfer may not complete correctly.
1. Turn off the projector and unplug the power cord from the projectors power inlet.
2. Insert the flash drive into the wireless LAN module port.
Note: Connect the flash drive directly to the projector. Do not use a hub.
3....

4. When the power, Lamp, and Temp lights turn orange, release the
Escbutton.
The lights flash to indicate that settings are transferring to the flash drive. When the lights stop
flashing, the power light turns orange and the projector enters standby mode.
Caution: Do not unplug the power cord or remove the flash drive while the lights are flashing. This
could damage the projector.
5. Once the projector enters standby mode, remove the flash drive.
Parent topic: Copying Menu Settings Between Projectors...

2. Insert the flash drive into the wireless LAN module port.
Note: Connect the flash drive directly to the projector. Do not use a hub.
3. Press and hold the Menubutton on the control panel or remote control as you connect the power
cord to the projectors power inlet.
4. When the power, Lamp, and Temp lights turn orange, release the Menubutton.
The lights flash to indicate that settings are transferring to the projector. When the lights stop
flashing, the power light turns orange and the projector enters...

5. Once the projector enters standby mode, remove the flash drive.
Parent topic:
Copying Menu Settings Between Projectors
Related references
Projector Light Status
Saving Settings To a Computer You can save the projector settings you want to transfer to a computer (PowerLite Pro
G6870/G6970WU).
Your computer must be running one of the following operating systems:
• Windows Vista
• Windows 7
• Windows 8.x
• OS X 10.5.8
• OS X 10.6.x
• OS X 10.7.x
• OS X 10.8.x
• OS X 10.9.x
• OS X 10.10.x
1. Turn off the...