Epson Projector PowerLite Pro G6470WU User Manual

2. Connect the BNC connectors to the projectors
R/Cr/Pr,G/Y,B/Cb/Pb ports.
Parent topic: Connecting to Video Sources
Related tasks
Connecting to a Video Source for Sound
Connecting to a Component-to-VGA Video Source If your video source has component video ports, you can connect it to the projector using an optional
component-to-VGA video cable. Depending on your component ports, you may need to use an adapter
cable along with a component video cable.
1. Connect the component connectors to your video...

Related tasks
Connecting to a Video Source for Sound
Connecting to an S-Video Video Source If your video source has an S-Video port, you can connect it to the projector using an optional S-Video
cable.
1. Connect the S-Video cable to your video sources S-Video output port.
2. Connect the other end to the projectors S-Videoport.
Parent topic: Connecting to Video Sources
Related tasks
Connecting to a Video Source for Sound
Connecting to a Composite Video Source If your video source has a composite video...

Related tasks
Connecting to a Video Source for Sound
Connecting to an SDI Video Source If your video source has an SDI port, you can connect it to the projector using an optional BNC video
cable (PowerLite Pro G6970WU).
1. Connect the BNC video cable to your video sources SDI output port.
2. Connect the other end to the projectors SDIport.
Parent topic: Connecting to Video Sources
Connecting to a Video Source for Sound You can play sound through the projectors speaker system if your video source has...

2. Do one of the following:
• Connect the other end of the cable to the projectors Audioport that corresponds to the
Computer orBNC port you are using for video.
• Connect the red and white plugs on the other end of the cable to the projectors Audio L-Rports.
Parent topic: Connecting to Video Sources
Related tasks
Connecting to External Speakers
Connecting to an HDBaseT Transmitter To send an HDMI or RS-232C signal over a long distance, you can connect the projector to an optional
HDBaseT transmitter...

See the documentation that came with the HDBaseT transmitter for instructions on connecting it to
your video device or computer.
4. Turn on the projector and HDBaseT transmitter.
Note: To enable communication from the Ethernet and serial ports on the transmitter, select Onas the
Control Communications setting in the projectors Extended menu. Turning on this setting disables the
projectors LAN,RS-232C, and Remoteports. If you connected an Extron XTP transmitter or switcher to
the projectors HDBaseTport,...

Parent topic:
Projector Connections
Related references
Projector Setup Settings - Extended Menu
Connecting to External Speakers To enhance the sound from your presentation, you can connect the projector to external self-powered
speakers. You can control the volume using the projectors remote control.
You can also connect the projector to an amplifier with speakers.
If you want to output audio from the external speakers when the projector is turned off, you need to
selectCommunication On for theStandby...

Attaching and Removing a Lens
Follow the instructions in these sections to attach or remove a compatible lens.
Attaching the Lens Unit
Removing the Lens Unit
Parent topic:Setting Up the Projector
Attaching the Lens Unit You can attach a compatible lens to the projector.
Caution:Place the projector so it faces to the side or down to attach a lens to help prevent dirt or dust
from entering the projector and lowering the projection quality. Be sure to attach only a compatible lens.
Avoid touching the lens...

1 Tighten
2 Loosen
2. Hold the lens unit with the white dot facing up. Insert the lens unit straight into the projectors lens socket and turn it clockwise until you hear it click into place.
48  

3. Insert the screw that came with the projector or the lens unit, and tighten it. This secures the lens unit
release button and prevents the lens from accidentally being removed.
4. Set the Lens Typesetting to the correct option in the projectors Extended menu.
Parent topic: Attaching and Removing a Lens
Related tasks
Setting the Lens Type
Removing the Lens Unit You can remove the lens unit to replace it with a different lens.
Caution:Remove the lens unit only when necessary to prevent dirt or dust from...

2. Remove the screw securing the lens unit release button.
3. Press and hold the lens unit release button as you turn the lens unit counterclockwise until you hear
it click.
4. Gently pull the lens unit straight out of the projector. 50