Epson Projector PowerLite Pro G6470WU User Manual

3 AC input port
4 Control panel
5 Cable clip slot
Parent topic: Projector Part Locations
Projector Parts - Interface Ports
1Audio1 port
2 Computer port
3 BNC ports
4 Audio2 port
5 RS-232C port
6 Remote port
7 Audio L-R ports
8 Video port
9 S-Video port
10 Audio Out port
11 Monitor Out port
12 DisplayPort connector
21  

13
HDMI port
14 Audio3 port
15 HDBaseT port
16 Network LANport
17 SDIport (PowerLite Pro G6970WU)
18 Service port
Parent topic: Projector Part Locations
Projector Parts - Base
22  

1 Front adjustable foot
2 Rear feet
3 Screw holes for cable cover
4 Security cable attachment point
5 Mounting bracket holes
6 Screw hole for lens unit release button
Parent topic: Projector Part Locations
Projector Parts - Control Panel
1 Power button
2Source Search button (searches for connected sources)
3 Left arrow button and displays the Control Panel Lock screen
4 Enter button (selects options and optimizes screen image when projecting an RGB signal from
the Computer orBNC ports)
5 Down arrow...

8
Escbutton (cancels/exits functions)
9 Up arrow button and displays screen adjustment options
10 Menu button (accesses projector menu system)
Parent topic: Projector Part Locations
Related references
Projector Light Status
24 

Projector Parts - Remote Control
25  

1
Onbutton (turns power on)
2 Standby button (turns power off)
3 Source buttons (changes input source; some buttons may not function depending on the model)
4 Auto button (automatically adjusts position, tracking, and sync settings when projecting analog
RGB signals from the ComputerorBNC ports)
5 Aspect button (selects the image aspect ratio)
6 Test Pattern button (displays a test pattern)
7 Freeze button (stops video action)
8 Menu button (accesses projector menu system)
9 Arrow buttons (move through...

27 Light button (lights up the buttons temporarily)
28 Indicator light (lights up when the remote control is in use)
29 Remote control signal emitter (emits remote control signals)
Parent topic: Projector Part Locations
27 

Setting Up the Projector
Follow the instructions in these sections to set up your projector for use.
Projector Placement
Projector Connections
Attaching and Removing a Lens
Attaching and Removing the Cable Cover
Attaching and Removing the Cable Clips
Installing Batteries in the Remote Control
Projector Placement You can place the projector on almost any flat surface to project an image.
You can also install the projector in a ceiling mount if you want to use it in a fixed location.
Keep these...

Front
Rear
Front ceiling
29    

Rear ceiling
Note:
Be sure to leave at least 20 inches (50 cm) of space in front of the air exhaust and intake vents
and, when setting up multiple projectors, 20 inches (50 cm) of space between the projectors.
30