Epson Projector PowerLite Pro G6450WU User Manual

3.
Select theImage menuandpress Enter.
 4.
Select theAuto Irissetting andselect On.
 Note:
Youcanturn Auto Irisonoroff for each Color Mode thatsupports thefeature. Youcannot
 change
theAuto Irissetting whenyouareusing aClosed Caption setting.
 5.
Press Menu orEsc toexit themenus.
 Parent
topic:ColorMode
 Controlling
theVolume withtheVolume Buttons
 You
canusetheVolume buttonsonthe remote controltoadjust thevolume asyou project a
 presentation
withaudio. Thevolume buttons controltheprojector ’s internal...

2.
Tolower orraise thevolume, presstheVolume buttonsonthe remote control.
 A
volume gaugeappears onthe screen.
 3.
Toset the volume toaspecific levelforaninput source, usetheprojector menus.
 Parent
topic:UsingBasicProjector Features
 Related
references
 Projector
FeatureSettings -Settings Menu
 Setting
theDate andTime
 You
cansetthe date andtime forthe projector.
 1.
Press theMenu button.
 2.
Select theExtended menuandpress Enter.
 3.
Select theOperation settingandpress Enter.
 4.
Select theDate &Time...

5.
Select theDate &Time setting andpress Enter.
 6.
Use thedisplayed keyboardtoenter thedate andtime.
 7.
When youarefinished, pressMenu.
 Parent
topic:UsingBasicProjector Features
 123 

Adjusting
ProjectorFeatures
 Follow
theinstructions inthese sections touse your projectors featureadjustments.
 Shutting
Offthe Picture andSound Temporarily
 Stopping
VideoAction Temporarily
 Zooming
Intoand OutofImages
 Projector
SecurityFeatures
 Projecting
TwoImages Simultaneously
 Using
Multiple Projectors
 Viewing
3DImages
 Saving
Settings toMemory andUsing Saved Settings
 Saving
aScheduled Event
 Shutting
Offthe Picture andSound Temporarily
 You
cantemporarily turnoffthe projected pictureandsound...

Stopping
VideoAction Temporarily
 You
cantemporarily stoptheaction inavideo orcomputer presentation andkeep thecurrent imageon
 the
screen. Anysound orvideo action continues torun, however, soyou cannot resume projection atthe
 point
thatyoustopped it.
 1.
Press theFreeze buttononthe remote controltostop thevideo action.
 2.
Torestart thevideo action inprogress, pressFreeze again.
 Parent
topic:Adjusting ProjectorFeatures
 Zooming
IntoandOutofImages
 You
candraw attention toparts ofapresentation...

•
To pan around thezoomed imagearea,usethearrow buttons.
 •
To zoom outofthe image, presstheE-Zoom –button asnecessary.
 •
To return tothe original imagesize,press Esc.
 Parent
topic:Adjusting ProjectorFeatures
 Projector
SecurityFeatures
 You
cansecure yourprojector todeter theftorprevent unintended usebysetting upthe following
 security
features:
 •
Password securitytoprevent theprojector frombeing turned on,and prevent changes tothe startup
 screen
andother settings.
 •
Button locksecurity toblock...

Parent
topic:Projector SecurityFeatures
 Setting
aPassword
 To
use password security,youmust setapassword.
 1.
Hold down theFreeze buttononthe remote controlforabout fiveseconds untilyouseethismenu.
 2.
Press thedown arrow toselect Password andpress Enter.
 You
seetheprompt Change thepassword?.
 3.
Select Yesandpress Enter.
 4.
Hold down theNum button onthe remote controlandusethenumeric buttonstoset afour-digit
 password.

The
password displaysas**** asyou enter it.Then youseetheconfirmation prompt....

7.
Make anote ofthe password andkeep itin asafe place incase youforget it.
 Parent
topic:Password SecurityTypes
 Selecting
Password SecurityTypes
 After
setting apassword, youseethismenu, allowing youtoselect thepassword securitytypesyouwant
 to
use.
 If
you donot see thismenu, holddown theFreeze buttononthe remote controlforfive seconds untilthe
 menu
appears.
 1.
Toprevent unauthorized useofthe projector, selectPower OnProtection ,press Enter,select On,
 press
Enter again, andpress Esc.
 2.
Toprevent...

You
must enter thecorrect password touse theprojector.
 1.
Hold down theNum button onthe remote controlwhileyouenter thepassword usingthenumeric
 buttons.

The
password screencloses.
 2.
Ifthe password isincorrect, thefollowing mayhappen:
 •
You seeawrong password messageandaprompt totry again. Enterthecorrect password to
 proceed.

•
Ifyou enter anincorrect password severaltimesinsuccession, theprojector displaysarequest
 code
andamessage tocontact EpsonSupport. Whenyoucontact EpsonSupport,...

Saving
aUser s Logo Image toDisplay
 You
cantransfer animage tothe projector andthen display itwhenever theprojector turnson.You can
 also
display theimage whentheprojector isnot receiving aninput signal orwhen youtemporarily stop
 projection
(usingtheA/V Mute feature). Thistransferred imageiscalled theUsers Logoscreen.
 The
image youselect asthe Users Logocanbeaphoto, graphic, orcompany logo,which isuseful in
 identifying
theprojectors ownertohelp deter theft.Youcanprevent changes tothe Users Logoby...