Epson Projector PowerLite Pro G6450WU User Manual

You
seetheUsers Logozoom factor menu.
 7.
Select azoom percentage andpress Enter.
 You
seeaprompt askingifyou want tosave theimage asthe Users Logo.
 8.
Select Yesandpress Enter.
 Note:
Ittakes afew moments forthe projector tosave theimage; donot use theprojector, itsremote
 control,
orany connected equipment untilitis finished.
 You
seeacompletion message.
 9.
Press Esctoexit themessage screen.
 10.
Select theExtended menuandpress Enter.
 11.
Select Display andpress Enter.
 12.
Select whenyouwant...

Locking
theProjector s Buttons
 You
canlock thebuttons onthe projectors controlpaneltoprevent anyonefromusing theprojector. You
 can
lock allthe buttons orall the buttons exceptthepower button.
 1.
Press theMenu button.
 2.
Select theSettings menuandpress Enter.
 3.
Select theControl PanelLocksetting andpress Enter.
 4.
Select oneofthese locktypes andpress Enter:
 •
To lock allofthe projectors buttons,selectFullLock .
 •
To lock allbuttons exceptthepower button, selectPartial Lock.
 You...

Parent
topic:Locking theProjector s Buttons
 Installing
aSecurity Cable
 You
caninstall twotypes ofsecurity cablesonthe projector todeter theft.
 •
Use thesecurity slotonthe projector toattach aKensington MicrosaverSecuritysystem,available
 from
Epson.
 •
Use thesecurity cableattachment pointonthe projector toattach awire cable andsecure itto aroom
 fixture
orheavy furniture.
 Parent
topic:Projector SecurityFeatures
 Related
references
 Projector
Parts-Rear
 Projecting
TwoImages Simultaneously
 You...

1.
Press theSplit button onthe remote control.
 The
currently selectedinputsource movestothe leftside ofthe screen.
 2.
Press theMenu button.
 You
seethisscreen:
 3.
Toselect aninput source forthe other image, selecttheSource setting,pressEnter,select the
 input
source, selectExecute ,and press Enter.(You canalso change imagesources, ifnecessary.)
 4.
Toswitch theimages, selecttheSwap Screens settingandpress Enter.
 5.
Tochange theimage sizes,select theScreen Sizesetting, pressEnter,select asizing...

7.
Toexit thesplit screen feature, presstheSplit orEsc button.
 Parent
topic:Adjusting ProjectorFeatures
 Using
Multiple Projectors
 You
cancombine theprojected imagesfromtwoormore projectors tocreate onelarge image. The
 following
twooptions areavailable:
 •
Project different imagesfromeach projector andcreate oneseamless image
 •
Project thesame image fromeach projector andusetheScale feature tocreate oneseamless image
 135   

Follow
theinstructions inthese sections tosetup andproject frommultiple projectors.
 Projector
Identification SystemforMultiple Projector Control
 Adjusting
thePosition ofthe Projected ImageFromMultiple Projectors
 Scaling
anImage
 Adjusting
theLamp s Brightness
 Blending
theImage Edges
 Adjusting
theBlack Level
 Matching
theImage Colors
 Parent
topic:Adjusting ProjectorFeatures
 Projector
Identification SystemforMultiple Projector Control
 You
canoperate multiple projectors usingoneremote...

4.
Select Projector IDand press Enter.
 5.
Use thearrow buttons onthe remote controltoselect theidentification numberyouwant touse for
 the
projector. Thenpress Enter.
 Repeat
thesestepsforallthe other projectors youwant tooperate fromoneremote control.
 Parent
topic:Projector Identification SystemforMultiple Projector Control
 Setting
theRemote ControlID
 The
remote controls IDisset tozero bydefault soitcan operate anycompatible projector.Ifyou want to
 set
the remote controltooperate onlyaparticular...

3.
Hold down theIDbutton onthe remote controlwhileyoupress thenumeric buttonthatmatches the
 projectors
ID.Then release thebuttons.
 Note:
Ifyou dont know theprojectors ID,hold down theIDbutton andpress theHelp button to
 temporarily
displaytheprojectors IDon the screen. Ifthe batteries areleftout ofthe remote control
 for
anextended period,theremote controlIDreturns toits default setting.
 Parent
topic:Projector Identification SystemforMultiple Projector Control
 Adjusting
thePosition ofthe Projected...

Related
tasks
 Displaying
aTest Pattern
 Adjusting
theImage Position UsingLensShift
 Resizing
theImage WiththeZoom Ring
 Correcting
ImageShape withQuick Corner
 Correcting
ImageShape withPoint Correction
 Scaling
anImage
 You
canproject thesame image frommultiple projectors andusetheScale feature tocrop andcombine
 them
intoone large image.
 1.
Press theMenu button.
 2.
Select theSignal menuandpress Enter.
 3.
Select theScale setting andpress Enter.
 You
seethisscreen:
 4.
Select theScale setting...

•
Full Display :Adjusts theimage tothe projectors screensizeasyou scale theimage
 6.
Select oneormore ofthe following scalingoptions andadjust itas necessary:
 •
–or +:Scales theimage horizontally andvertically atthe same time
 •
Scale Vertically :Scales theimage vertically only
 •
Scale Horizontally :Scales theimage horizontally only
 7.
Select theImage Display Rangesettingandusethearrow buttons toadjust thecoordinates and
 size
ofeach image asyou view thescreen.
 8.
When youarefinished, pressMenu....