Epson Projector PowerLite Home Cinema 600 User Manual

							3. Select the
Extendedmenu and press Enter.
4. Select the Languagesetting and press Enter.
5. Select the language you want to use and press Enter.
6. Press MenuorEsc to exit the menus.
Parent topic: Using Basic Projector Features
Adjusting the Image Height If you are projecting from a table or other flat surface, and the image is too high or low, you can adjust
the image height using the projectors adjustable feet.
1. Turn on the projector and display an image.
61 
						

							2. To adjust the front foot, pull up on the foot release lever and lift the front of the projector.
The foot extends from the projector.
3. Release the lever to lock the foot.
4. If the image is tilted, rotate the rear feet to adjust their height.
If the projected image is unevenly rectangular, you need to adjust the image shape.
Parent topic: Using Basic Projector Features
Related concepts
Image Shape
62   
						

							Image Shape
You can project an evenly rectangular image by placing the projector directly in front of the center of the
screen and keeping it level. If you place the projector at an angle to the screen, or tilted up or down, or off
to the side, you may need to correct the image shape for the best display quality.
When you turn on automatic keystone correction in your projectors Settings menu, your projector
automatically corrects vertical keystone effects when you reposition the projector.
Correcting Image Shape with the Horizontal Keystone Slider
Correcting Image Shape with the Keystone Buttons
Correcting Image Shape with Quick Corner
Parent topic:Using Basic Projector Features
Related references
Projector Feature Settings - Settings Menu
Correcting Image Shape with the Horizontal Keystone Slider You can use the projectors horizontal keystone slider to correct the shape of an image that is unevenly
rectangular horizontally, such as when the projector is placed to the side of the projection area.
Note:To provide the best possible image quality, adjust the projectors position to correct the image
shape. If this isnt possible, use the horizontal keystone slider on the projector to correct the image
shape.
1. Turn on the projector and display an image.
Note: You can display a pattern to aid in adjusting the projected image using the Settings menu.
Note: You can also display the pattern by pressing the Userbutton on the remote control (if the test
pattern is assigned to this button).
63 
						

							2. Adjust the slider until the image is evenly rectangular.
After correction, your image is slightly smaller.
Parent topic: Image Shape
Related references
Projector Feature Settings - Settings Menu
Correcting Image Shape with the Keystone Buttons You can use the projectors keystone correction buttons to correct the shape of an image that is
unevenly rectangular on the sides.
Note:To provide the best possible image quality, adjust the projectors position to correct the image
shape. If this isnt possible, use the keystone correction buttons on the projector to correct the image
shape.
1. Turn on the projector and display an image.
Note: You can display a pattern to aid in adjusting the projected image using the Settings menu.
Note: You can also display the pattern by pressing the Userbutton on the remote control (if the test
pattern is assigned to this button).
64  
						

							2. Press one of these keystone buttons on the control panel to display the Keystone adjustment
screen.
3. Press a keystone button on the projectors control panel to adjust the image shape.
65    
						

							After correction, your image is slightly smaller.
Note:
If the projector is installed out of reach, you can also correct the image shape with the remote
control using the Keystonesettings in the projector menus.
Parent topic: Image Shape
Related references
Projector Feature Settings - Settings Menu
Correcting Image Shape with Quick Corner You can use the projectors Quick Corner setting to correct the shape and size of an image that is
unevenly rectangular on all sides.
Note:To provide the best possible image quality, adjust the projectors position to correct the image
shape. If this isnt possible, use the Quick Corner setting to correct the image shape.
1. Turn on the projector and display an image.
Note: You can display a pattern to aid in adjusting the projected image using the Settings menu.
Note: You can also display the pattern by pressing the Userbutton on the remote control (if the test
pattern is assigned to this button).
2. Press the Menubutton.
66 
						

							3. Select the
Settingsmenu and press Enter.
4. Select the Keystonesetting and press Enter.
5. Select the Quick Corner setting and press Enter. Then press Enteragain.
You see the Quick Corner adjustment screen:
6. Use the arrow buttons on the projector or the remote control to select the corner of the image you want to adjust. Then press Enter.
67 
						

							7. Press the arrow buttons to adjust the image shape as necessary.
8. When you are finished, press
Esc.
Parent topic: Image Shape
Related references
Projector Feature Settings - Settings Menu
Resizing the Image with the Wide and Tele Buttons 1. Turn on the projector and display an image.
2. To enlarge the image size, press the Widebutton on the projectors control panel.
3. To reduce the image size, press the Telebutton.
Note: If the projector is installed out of reach, you can also adjust the image size with the remote
control using the Zoomsetting in the projector menus.
Parent topic: Using Basic Projector Features
Related references
Projector Feature Settings - Settings Menu
Focusing the Image Using the Focus Ring 1. Turn on the projector and display an image.
Note: You can display a pattern to aid in adjusting the projected image using the Settings menu.
68  
						

							2. To sharpen the image focus, rotate the projector’s focus ring.
Parent topic:
Using Basic Projector Features
Related references
Projector Feature Settings - Settings Menu
Remote Control Operation The remote control lets you control the projector from almost anywhere in the room. You can point it at
the screen, or the front or back of the projector.
Make sure that you aim the remote control at the projectors receivers within the distance and angles
listed here.
69   
						

							1 19.7 feet (6 m)
2 ± 30°
3 ± 15°
Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or
the projector may not respond to commands. If you will not use the remote control for a long time,
remove the batteries.
Using the Remote Control as a Wireless Mouse
Using the Remote Control as a Pointer
Parent topic: Using Basic Projector Features
Related tasks
Replacing the Remote Control Batteries
Using the Remote Control as a Wireless Mouse You can use the projectors remote control as a wireless mouse so you can control projection at a
distance from the computer.
1. Connect the projector to a computer using the projectors USB-B,Computer, or HDMIport to
display video.
2. If you connected your computer to a port other than the projectors USB-Bport, also connect a USB
cable to the projectors USB-Bport and to a USB port on your computer (for wireless mouse
support).
3. Start your presentation.
70