Epson Projector PowerLite Home Cinema 600 User Manual

Input Signal Settings - Signal Menu
Normally the projector detects and optimizes the input signal settings automatically. If you need to
customize the settings, you can use the Signal menu. The available settings depend on the currently
selected input source.
Note:You can restore the default settings of the Position,Tracking, and Syncsettings by pressing the
Auto button on the remote control.
To change settings for an input source, make sure the source is connected and select that source. Setting Options...

Setting
Options Description
Sync. Varying levels available Adjusts signal to eliminate
fuzziness or flickering in
computer images
Position Up, down, left, right Adjusts the image location on the
screen
Progressive Off Sets whether to convert
interlaced-to-progressive signals
Video
for certain video image types
Film/Auto Off: for fast-moving video images
Video: for most video images
Film/Auto: for movies, computer
graphics, and animation
Noise Reduction Off Reduces flickering in analog
images in two...

Setting
Options Description
Input Signal Auto Specifies the signal type from
input sources connected to
RGB
computer ports
Component Auto: detects signals
automatically
RGB: corrects color for
computer/RGB video inputs
Component: corrects color for
component video inputs
Video Signal Auto Specifies the signal type from the
input sources connected to the
Various video standards
video ports
Auto: detects signals
automatically
Aspect See the list of available aspect Sets the aspect ratio (width-to-
ratios...

Related references
Available Image Aspect Ratios
Projector Feature Settings - Settings Menu Options on the Settings menu let you customize various projector features. The available settings
depend on the currently selected input source.
Setting OptionsDescription
Keystone H/V KeystoneAdjusts image shape to
rectangular (horizontally and
Quick Corner
vertically)
H/V Keystone: lets you manually
correct horizontal and vertical
sides, or turn automatic
correction or the horizontal
keystone slider on or off...

Setting
OptionsDescription
Control Panel Lock Full LockControls projector button locking
to secure the projector
Partial Lock
Full Lock: locks all buttons
Off
Partial Lock: locks all buttons
except the power button
Off: no buttons locked
Pointer Shape Three shapes availableChanges the shape of the remote
control pointer feature
Volume Varying levels available Adjusts the volume of the
projector’s speaker system
Remote Receiver FrontLimits reception of remote control
signals by the selected receiver;...

Correcting Image Shape with Quick Corner
Projector Setup Settings - Extended Menu Settings on the Extended menu let you customize various projector setup features that control its
operation.
Setting Options Description
Display Messages Selects various display options
Display Background Messages: controls whether messages are
displayed on the screen
Startup Screen
Display Background: selects the screen
A/V Mute
color or logo to display when no signal is
received
Startup Screen: controls whether a special...

Setting
Options Description
Users Logo — Creates a screen that the projector displays to
identify itself and enhance security
Projection Front Selects the way the projector faces the screen
so the image is oriented correctly
Front/Ceiling
Rear
Rear/Ceiling
Operation Direct Power On Selects various operation options
High Altitude Mode Direct Power On: turns on the projector when
you plug it in
Startup Source Search
High Altitude Mode: regulates the projector’s
operating temperature at altitudes above...

Projector Network Settings - Network Menu
Settings on the Network menu let you view network information and set up the projector for monitoring
and control over a network.
Setting OptionsDescription
Net. Info - Wireless LAN Connection mode Displays wireless network status
and details
Antenna level
Projector Name
SSID
DHCP
IP Address
Subnet Mask
Gateway Address
MAC Address
Region Code
Network Configuration Accesses additional network Configures your network settings
menus
108 

Parent topic:
Adjusting the Menu Settings
Related tasks
Selecting Wireless Network Settings Manually
Projector Setup Settings - ECO Menu Settings on the ECO menu let you customize projector functions to save power. When you select a
power-saving setting, a leaf icon appears next to the menu item.
Setting OptionsDescription
Power Consumption NormalSelects the brightness mode of
the projector lamp
ECO
Normal: sets maximum lamp
brightness
ECO: reduces lamp brightness
and fan noise, and saves power
and lamp...

Setting
OptionsDescription
Sleep Mode OnAutomatically places the
projector in standby mode after
Off
an interval of inactivity
Sleep Mode Timer 1 to 30 minutesSets the interval for Sleep Mode
Lens Cover Timer OnAutomatically turns off the
projector after 30 minutes if the
Off
lens cover is closed
A/V Mute Timer OnAutomatically turns off the
projector after 30 minutes if
Off
A/V Muteis enabled
Standby Mode Communication OnCommunication Onindicates
that the projector can be
Communication Off
monitored and...