Epson Projector PowerLite 570 User Manual

Power
light
 Status
light
 Lamp
light
 Temp
light
 Status
andsolution
 Off
 Flashing
blue
 Orange
 Off
 Lamp
hasaproblem.
 •
Check tosee ifthe lamp isburned
 out,
broken, orinstalled incorrectly.
 Reseat
orreplace thelamp as
 necessary.

•
Clean orreplace theairfilter.
 •
Ifoperating theprojector athigh
 altitude,
turnonHigh Altitude
 Mode
.
 •
Ifthe problem persists, unplugthe
 projector
andcontact Epsonfor
 help.

Flashing
blue
 Varies
 Flashing
 Varies
 Replace
thelamp soon toavoid
 orange
 damage....

Projector
SetupSettings -Extended Menu
 Where
toGet Help
 Related
tasks
 Cleaning
theAirFilter andVents
 Replacing
theAirFilter
 Replacing
theLamp
 Using
theProjector HelpDisplays
 You
candisplay information tohelp yousolve common problems usingtheprojectors Helpsystem.
 1.
Turn onthe projector.
 2.
Press theHelp button onthe projector orthe remote control.
 You
seetheHelp menu.
 3.
Use theupand down arrow buttons tohighlight theproblem youwant tosolve.
 4.
Press Entertoview thesolutions.
 5.
When...

Solutions
toMicrophone Problems
 Parent
topic:Solving Problems
 Solutions
WhenNoImage Appears
 If
no image appears, trythe following solutions:
 •
Press theA/V Mute button onthe remote controltosee ifthe image wastemporarily turnedoff.
 •
Make sureallnecessary cablesaresecurely connected andthepower ison for the projector and
 connected
videosources.
 •
Ifyou connected yourvideo source tothe Monitor Out/Computer2 port,make sureyousetthe
 Monitor
OutPort setting toComputer2 .
 •
Press theprojectors...

Solutions
WhenImage isIncorrect UsingtheUSB Display Function
 If
no image appears orifthe image appears incorrectly usingtheUSB Display function, trythe following
 solutions:

•
Press theUSB button onthe remote control.
 •
Make suretheUSB Display software hasinstalled correctly. Installitmanually ifnecessary.
 •
With OSX,select theUSB Display iconinthe Dock orfrom theApplications folder.
 •
For images projected withWindows MediaCenter, reducethescreen sizefrom fullscreen mode.
 •
For images projected...

2.
Todisplay onboth thelaptops monitorandtheprojector, trypressing thesame keysagain.
 3.
Ifthe same image isnot displayed bythe laptop andprojector, checktheWindows Displayutilityto
 make
suretheexternal monitorportisenabled andextended desktopmodeisdisabled. (Seeyour
 computer
orWindows manualforinstructions.)
 4.
Ifnecessary, checkyourvideo cardsettings andsetthe multiple displayoptiontoMirror or
 Duplicate
.
 Parent
topic:Solutions WhenNo Signal Message Appears
 Displaying
FromaMac Laptop
 If
you...

•
Ifyou zoomed intoorout ofthe image usingtheE-Zoom buttons,presstheEsc button untilthe
 projector
returnstoafull display.
 •
Check yourcomputer displaysettings todisable dualdisplay andsetthe resolution withinthe
 projectors
limits.(Seeyourcomputer manualfordetails.)
 •
Check theresolution assignedtoyour presentation filestosee ifthey arecreated foradifferent
 resolution
thanyouareprojecting in.(See yoursoftware helpfordetails.)
 Parent
topic:Solving ImageorSound Problems
 Related
references
 Input...

•
No longer than10feet (3m) forVGA/computer cablesor24 feet (7.3 m)forHDMI cables
 •
Check thesettings onthe projectors Signalmenutomake suretheymatch thevideo source. If
 available
foryour video source, adjusttheProgressive andNoise Reduction settings.
 •
Select acomputer videoresolution andrefresh ratethatarecompatible withtheprojector.
 •
Ifyou areprojecting fromacomputer, presstheAuto button onthe remote controltoautomatically
 adjust
theTracking andSync settings.
 •
Ifyou adjusted theimage shape...

•
Ifyou areprojecting fromacomputer, presstheAuto button onthe remote controltoautomatically
 adjust
thetracking andsync. Ifany bands oroverall blurriness remain,displayauniformly patterned
 image
onthe screen andmanually adjusttheTracking andSync settings.
 •
Ifyou areprojecting fromacomputer, usealower resolution.
 Parent
topic:Solving ImageorSound Problems
 Solutions
WhentheImage Brightness orColors areIncorrect
 If
the projected imageistoo dark orlight, orthe colors areincorrect, trythe following...

•
Press theA/V Mute button onthe remote controltoresume videoandaudio ifthey were temporarily
 stopped.

•
Press theSource Searchbuttontoswitch tothe correct inputsource, ifnecessary.
 •
Check yourcomputer orvideo source tomake surethevolume isturned upand theaudio output isset
 for
the correct source.
 •
Check theaudio cableconnections betweentheprojector andyour video source.
 •
Ifyou donot hear sound fromanHDMI source, setthe connected devicetoPCM output.
 •
Make sureanyconnected audiocables...

Related
tasks
 Connecting
aMicrophone
 Solving
Projector orRemote ControlOperation Problems
 Check
thesolutions inthese sections ifyou have problems operating theprojector orremote control.
 Solutions
toProjector PowerorShut-Off Problems
 Solutions
toProblems withtheRemote Control
 Solutions
toPassword Problems
 Parent
topic:Solving Problems
 Solutions
toProjector PowerorShut-Off Problems
 If
the projector doesnotcome onwhen youpress thepower button oritshuts offunexpectedly, trythe
 following...