Epson Projector PowerLite 570 User Manual

3.
Use thescrewdriver includedwiththereplacement lamptoloosen thescrew securing thelamp
 cover.

4.
Slide offthe lamp cover.
 141   

5.
Loosen thescrews securing thelamp tothe projector. Thescrews donot come allthe way out.
 6.
Liftupthe lamp handle andgently pullthelamp outofthe projector.
 Note:
Thelamp(s) inthis product containmercury. Pleaseconsult yourstate andlocal
 regulations
regardingdisposalorrecycling. Donot putinthe trash.
 142    

7.
Gently insertthenew lamp intotheprojector alongtheguide rail.Ifitdoes notfiteasily, makesureit
 is
facing theright way. Press thehandle down.
 Caution:
Donot touch anyglass onthe lamp assembly toavoid premature lampfailure.
 8.
Tighten thescrews tosecure thelamp.
 143   

9.
Replace thelamp cover andtighten thescrew tosecure it.
 Note:
Besure thelamp cover issecurely installedorthe lamp willnot come on.
 Reset
thelamp timer tozero tokeep trackofthe new lamp ’s usage.
 Parent
topic:Projector LampMaintenance
 Related
tasks
 Resetting
theLamp Timer
 Resetting
theLamp Timer
 You
must reset thelamp timer afterreplacing theprojectors lamptoclear thelamp replacement
 message
andtokeep trackoflamp usage correctly.
 Note:
Donot reset thelamp timer ifyou have notreplaced thelamp...

3.
Select theReset menuandpress Enter.
 4.
Select ResetLampHours andpress Enter.
 You
seeaprompt askingifyou want toreset thelamp hours.
 5.
Select Yesandpress Enter.
 6.
Press Menu orEsc toexit themenus.
 Parent
topic:Projector LampMaintenance
 Related
tasks
 Replacing
theLamp
 Replacing
theRemote ControlBatteries
 The
remote controlusestwoAAmanganese oralkaline batteries. Replacethebatteries assoon asthey
 run
out.
 Caution:
Useonly thetype ofbatteries specified inthis manual. Donot install batteries...

1.
Open thebattery coverasshown.
 2.
Remove theoldbatteries.
 Warning:
Ifthe battery fluidhasleaked, wipeitaway withasoft cloth andavoid getting thefluid on
 your
hands. Ifitgets onyour hands, washthemimmediately toavoid injury.
 3.
Insert thebatteries withthe+and –ends facing asshown.
 146   

4.
Close thebattery coverandpress itdown untilitclicks intoplace.
 Warning:
Disposeofused batteries according tolocal regulations. Donot expose batteries toheat
 or
flame. Keepbatteries outofthe reach ofchildren; theyarechoking hazards andarevery
 dangerous
ifswallowed.
 Parent
topic:Projector Maintenance
 Transporting
theProjector
 The
projector containsprecision parts,someofwhich areglass. Follow theseguidelines totransport or
 ship
theprojector safely:
 •
Remove anyequipment connectedtothe...

Solving
Problems
 Check
thesolutions inthese sections ifyou have anyproblems usingtheprojector.
 Projection
ProblemTips
 Projector
LightStatus
 Using
theProjector HelpDisplays
 Solving
ImageorSound Problems
 Solving
Projector orRemote ControlOperation Problems
 Solutions
WhenNetwork AlertE-Mails areNot Received
 Where
toGet Help
 Projection
ProblemTips
 If
the projector isnot working properly, tryturning itoff and unplugging it.Then plugitback inand turn it
 on.

If
this does notsolve theproblem,...

Projector
LightStatus
 The
lights onthe projector indicatetheprojector statusandletyou know when aproblem occurs.Check
 the
status andcolor ofthe lights andlook forasolution inthe table here.
 1
 Power
light
 2
 Status
light
 3
 Lamp
light
 4
 Temp
(temperature) light
 Power
light
 Status
light
 Lamp
light
 Temp
light
 Status
andsolution
 Blue
 Blue
 Off
 Off
 Normal
operation.
 Blue
 Flashing
blue
 Off
 Off
 Warming
up.Wait foranimage to
 appear.

Blue
 Off
 Off
 Off
 Standby
orsleep mode.
 149  

Power
light
 Status
light
 Lamp
light
 Temp
light
 Status
andsolution
 Blue
 Flashing
blue
 Off
 Off
 Shutting
down.(When theStatus light
 stops
flashing, youcanunplug the
 projector.)

Blue
 Varies
 Off
 Flashing
 Projector
istoo hot.
 orange

•
Make surethatthevents andair
 filter
arenotclogged withdust or
 obstructed
bynearby objects.
 •
Clean orreplace theairfilter.
 •
Make suretheenvironmental
 temperature
isnot toohot.
 Off
 Flashing
blue
 Off
 Orange
 Projector
hasoverheated andturned
 off....