Epson Projector Powerlite 5000 User Manual

Remote ControlThe buttons on the remote control enable you to turn the projector on
and off, and provide direct access to auto set up, blank, freeze, volume,
mute, and image source switching. Use the remote control buttons to
access custom functions (with the ELP Link II software) and the
projector’s menu system. You can even use the remote control to
control your computer in place of your computer’s mouse.
Sleep Mode
Sleep mode conserves electricity by automatically turning off the lamp
after the...

Optional Accessories
To enhance your use of the projector, EPSON provides the following
accessories:
lCarrying cases especially designed for the projector and its cables.
Both a soft and hard case are available.
Soft Carrying CaseELPKS04
Hard Carrying Case
ELPKS05
lReplacement lamp and air filter.
Lamp with FilterELPLP03
lCommunication cable set and computer cable so you can connect
your projector to a second computer. Also add a MAC adapter set
to connect to a second Macintosh.
ELP communication cable...

About This Manual
Chapter 1, “Installation,” gives step-by-step instructions on how to set
up the projector and connect it to your computer, video source, or
other optional equipment. Read the installation procedures that apply
to your environment.
Chapter 2, “Using the Projector,” describes how to turn on the
projector and control simple projector settings using the remote
control or the operation panel.
Chapter 3, “Using the Projector Menus,” describes how to use the
menus to adjust the color and image...

Safety Instructions
Follow these safety instructions when setting up and using the
projector:1.Do not place the projector on an unstable cart, stand, or table
2.Do not use the projector near water or sources of heat.
3.Use attachments only as recommended.
4.Use the type of power source indicated on the projector. If you are
not sure of the power available, consult your dealer or power
company.
5.Place the projector near a wall outlet where the plug can be easily
unplugged. Placez 
I ?mprimante p&s d’une...

10. Unplug the projector from the wall outlet before cleaning. Use a
damp cloth for cleaning. Do not use liquid or aerosol cleaners.
11. Do not block the slots and openings in the projector case. They
provide ventilation and prevent the projector from overheating.
Do not operate the projector on a sofa, rug, or other soft surface,
or in a closed-in cabinet unless proper ventilation is provided.
12. Never push objects of any kind through cabinet slots. Never spill
liquid of any kind into the projector....

Where to Get Help
EPSON provides customer support and service through a network of
authorized EPSON Customer Care Centers. Dial (800) 922-8911 for
the nearest location or the following services:
Fax-on-Demand access to EPSON’s technical information library
Literature on current and new products
The location of your nearest Authorized EPSON Reseller or
Customer Care Center
Technical information on installation, configuration, and
operation of EPSON products
Customer relations
For answers to commonly asked...

Electronic Support Services
You can access helpful tips, specifications, DIP switch or jumper
settings, drivers, Frequently Asked Questions (FAQs), sample files,
application notes, and EPSONproduct bulletins 24 hours a day, 7
days a week, using a modem and one of the on-line services below.
World Wide Web
From the Internet, you can reach EPSON’s Home Page at
http://www.epson.com
EPSON Internet FTP Site
If you have Internet FTP capability, use your Web browser (or other
software for FTP downloading) to...

EPSON Forum on CompuServe®
Members of CompuServe can type GO EPSON at the menu prompt
to reach CompuServe’s Epson America Forum. As an owner of an
EPSON product, you are eligible for a free introductory CompuServe
membership, which entitles you to an introductory credit and your
own user ID and password. To take advantage of this offer in the U.S.
or Canada, call (800) 848-8199 and ask for representative #529.
Energy Star Compliance
As an ENERGY STAR Partner, EPSON has determined that this
product meets...

Installation
This chapter describes how to unpack, set up, and connect your
projector to other equipment. The projector must be connected to a
computer or a video source such as a VCR, camcorder, or laser disc
player. For example, you may want to connect the projector to both
your computer and a video source, or set up the projector for one or
more of the following:
lConnect the mouse cable to use the remote control as a wireless
mouse.
lProvide audio for one or both image sources. The audio source can...

Unpacking the Projector
When you unpack the projector, make sure you have all these
components:0 Projector
0 Lens cover
Remote control
2 AA batteries
Power cord
Video cable
Audio cable
Audio/visual (A/V) cable
Macintosh adapter set
Video adapterMonitor adapter
ELP Link II Communication Kit
Main cableSerial cable
Mouse cable for PS/2Macintosh serial cable
Mouse cable for SerialDiskette for Windows
Mouse cable for MacintoshDiskette for Macintosh
Depending on the configuration of your equipment, you may not...