Epson Projector PowerLite 4750W User Manual

							

Parent
topic:Wireless NetworkProjection
 Setting
UpWireless NetworkSecurity
 You
cansetupsecurity foryour projector touse onthe wireless network. Setupone ofthe following
 security
optionstomatch thesettings usedonyour network:
 •
WEP encryption
 •
WPA security
 Note:
Check withyour network administrator forguidance onentering thecorrect information.
 1.
Press theMenu button.
 2.
Select theNetwork menuandpress Enter.
 3.
Select Network Configuration andpress Enter.
 4.
Select theSecurity menuandpress Enter.
 5.
Select thesecurity settingsasnecessary tomatch yournetwork settings.
 6.
When youfinish selecting settings,selectComplete andfollow theon-screen instructions tosave
 your
settings andexitthemenus.
 Wireless
SecurityMenuSettings
 61 
						

							

Parent
topic:Wireless NetworkProjection
 Wireless
SecurityMenuSettings
 Settings
onthe Security menuletyou select thetype ofsecurity andsecurity settingsthatmatch the
 network
youareconnecting theprojector to.
 Setting
 Options
 Description

Security
 WEP
andWPA types available
 Selects
thetype ofsecurity used
 on
the wireless network
 WEP
Encryption
 128Bit
 For
WEP security, selectsthe
 type
ofencryption coding
 64Bit

Format
 ASCII
 For
WEP security, selectsthe
 encryption
inputmethod:
 HEX

ASCII
:enables textinput
 HEX
:enables hexadecimal input
 Key
ID
 1
to 4
 For
WEP security, selectsthe
 WEP
encryption keyID
 Encryption
Key1to
 Various
characters depending on
 For
theselected WEPKeyID
 selected
WEPEncryption and
 setting,
enterthekey used for
 Encryption
Key4
 Format
settings
 WEP
encryption:
 128
bitASCII :13 alphanumeric
 characters

128
bitHEX :26 characters (0to
 9
and Ato F)
 64
bit ASCII :5 alphanumeric
 characters

64
bit HEX :10 characters (0to9
 and
Ato F)
 Authentication
Type
 Open
 For
WEP security, selectsthe
 type
ofWEP authentication used
 Shared

Passphrase
 Various
keysfrom8to 32
 For
WPA-PSK orWPA2-PSK
 characters
 security,
selectsthepre-shared
 key
used onthe network
 62 
						

							

Parent
topic:Setting UpWireless NetworkSecurity
 Setting
UpProjector NetworkE-MailAlerts
 You
cansetupthe projector tosend youane-mail alertover thenetwork ifthere isaproblem withthe
 projector.

1.
Press theMenu button.
 2.
Select theNetwork menuandpress Enter.
 3.
Select Network Configuration andpress Enter.
 4.
Select theMail menu andpress Enter.
 5.
Turn onMail Notification .
 6.
Enter theIPaddress forthe SMTP Server option.
 Note:
Toenter theIPaddress usingthenumeric keysonthe remote control, pressandhold the
 Num
button. Donot use these addresses: 127.x.x.xor224.0.0.0 through255.255.255.255 (wherex
 is
anumber from0to 255).
 7.
Select anumber forthe SMTP server PortNumber ,from 1to 65535 (default is25).
 63 
						

							

8.
Choose anAddress field,enter thee-mail address, andselect thealerts youwant toreceive there.
 Repeat
foruptothree addresses.
 Note:
Youre-mail address canbeupto32 alphanumeric characterslong.
 9.
When youfinish selecting settings,selectComplete andfollow theon-screen instructions tosave
 your
settings andexitthemenus.
 Note:
Ifa critical problem causesaprojector toshut down, youmay notreceive ane-mail alert.
 Network
Projector E-mailAlertMessages
 Parent
topic:UsingtheProjector onaNetwork
 Network
Projector E-mailAlertMessages
 When
aproblem occurswithanetworked projector,andyouselected toreceive e-mailalerts,you
 receive
ane-mail containing thefollowing information:
 •
Epson Projector onthe subject line
 •
The name ofthe projector experiencing aproblem
 •
The IPaddress ofthe affected projector
 •
Detailed information abouttheproblem
 Note:
Ifa critical problem causesaprojector toshut down, youmay notreceive ane-mail alert.
 Parent
topic:Setting UpProjector NetworkE-MailAlerts
 Setting
UpMonitoring UsingSNMP
 Network
administrators caninstall SNMP (Simple Network Management Protocol)softwareonnetwork
 computers
sothey canmonitor projectors. Ifyour network usesthissoftware, youcansetupthe
 projector
forSNMP monitoring.
 1.
Press theMenu button.
 2.
Select theNetwork menuandpress Enter.
 3.
Select Network Configuration andpress Enter.
 64 
						

							

4.
Select theOthers menuandpress Enter.
 5.
Enter uptotwo IPaddresses toreceive SNMPnotifications, using0to 255 foreach address field.
 Note:
Toenter theIPaddress usingthenumeric keysonthe remote control, pressandhold the
 Num
button. Donot use these addresses: 127.x.x.xor224.0.0.0 through255.255.255.255 (wherex
 is
anumber from0to 255).
 6.
Ifavailable, selectthePriority Gateway settingforyour network.
 7.
Ifyour network environment usesanAMX controller, turnonthe AMX Device Discovery settingto
 allow
theprojector tobe detected.
 8.
Ifyour network environment usesaCrestron RoomView controller,turnonthe Crestron RoomView
 setting
toallow theprojector tobe detected.
 Note:
Enabling CrestronRoomView disablestheEpson Message Broadcast featureinthe EMP
 monitor
software.
 9.
Ifyou areconnecting toanetwork usingBonjour, turnonthe Bonjour setting.
 10.
Ifyou want thisprojector toreceive broadcasted messagesoverthenetwork, turnonthe Message
 Broadcasting
setting.Administrators canbroadcast messages overthenetwork usingtheMessage
 Broadcasting
plug-inforEasyMP Monitor(Windows only).
 65 
						

							

11.
When youfinish selecting settings,selectComplete andfollow theon-screen instructions tosave
 your
settings andexitthemenus.
 Parent
topic:UsingtheProjector onaNetwork
 Controlling
aNetworked ProjectorUsingaWeb Browser
 Once
youhave connected yourprojector toyour network, youcanselect projector settingsandcontrol
 projection
usingacompatible webbrowser. Thisletsyou access theprojector remotely.
 Note:
Theweb setup andcontrol features supportMicrosoft InternetExplorer 6.0orlater, andSafari on
 networks
thatdonot use aproxy server forconnection. Youcannot selectallofthe projector menu
 settings
orcontrol allprojector functions usingaweb browser.
 Note:
Ifyou setStandby ModetoCommunication On,you canuseaweb browser toselect settings
 and
control projection evenifthe projector isin standby mode.
 1.
Make suretheprojector isturned on.
 2.
Start yourwebbrowser onacomputer connected tothe network.
 3.
Type theprojectors IPaddress intothebrowsers addressboxand press thecomputers Enterkey.
 You
seetheWeb Control screen.
 4.
Toselect projector menusettings, selectthename ofthe menu andfollow theon-screen instructions
 to
select settings.
 5.
Tocontrol projection remotely,selecttheWeb Remote option.
 You
seethisscreen:
 66 
						

							

1
 Power
onbutton control
 2
 Input
source selection controls
 3
 Freeze
buttoncontrol
 4
 A/V
Mute button control
 5
 Page
Upand Page Down button controls
 6
 Closed
caption control
 7
 Volume
buttoncontrols
 8
 Source
searchcontrol
 9
 Power
offbutton control
 6.
Select theicon corresponding tothe projector functionyouwant tocontrol.
 Parent
topic:UsingtheProjector onaNetwork
 Related
references
 Projector
SetupSettings -Extended Menu
 67  
						

							

Crestron
RoomView Support
 If
you areusing theCrestron RoomView networkmonitoring andcontrol system, youcansetupyour
 projector
foruse onthe system. Crestron RoomView letsyou control andmonitor yourprojector usinga
 web
browser.
 Note:
Youcannot usetheEpson WebControl featureorthe Message Broadcasting plug-inforEasyMP
 Monitor
whenyouuseCrestron RoomView.
 For
additional information onCrestron RoomView, contactCrestron.
 Setting
UpCrestron RoomView Support
 Controlling
aNetworked ProjectorUsingCrestron RoomView
 Parent
topic:UsingtheProjector onaNetwork
 Setting
UpCrestron RoomView Support
 To
set upyour projector formonitoring andcontrol usingaCrestron RoomView system,makesureyour
 computer
andprojector areconnected tothe network. Ifyou areconnecting wirelessly,setupthe
 projector
usingtheAdvanced networkconnection mode.
 Note:
Ifyou want touse theCrestron RoomView systemwhentheprojector isturned off,you need to
 adjust
theStandby Modesettings inthe Extended menu.
 1.
Press theMenu button.
 2.
Select theNetwork menuandpress Enter.
 3.
Select Network Configuration andpress Enter.
 68 
						

							

4.
Select theOthers menuandpress Enter.
 5.
SettheCrestron RoomView settingtoOn toallow theprojector tobe detected.
 Note:
Enabling CrestronRoomView disablestheEpson Message Broadcast featureinthe EMP
 monitor
software.
 6.
When youfinish selecting settings,selectComplete andfollow theon-screen instructions tosave
 your
settings andexitthemenus.
 7.
Turn offthe projector, thenturniton again toenable thesetting.
 Parent
topic:Crestron RoomView Support
 Controlling
aNetworked ProjectorUsingCrestron RoomView
 Once
youhave setupyour projector touse Crestron RoomView, youcancontrol andmonitor projection
 using
acompatible webbrowser.
 1.
Start yourwebbrowser onacomputer connected tothe network.
 2.
Type theprojectors IPaddress intothebrowsers addressboxand press thecomputers Enterkey.
 You
seethisscreen:
 69 
						

							

3.
Select theinput source thatyouwant tocontrol inthe Sources Listbox. Youcanscroll through
 available
sourcesusingtheupand down arrows inthe box.
 4.
Tocontrol projection remotely,clicktheon-screen buttonsthatcorrespond tothe projectors remote
 control
buttons. Youcanscroll through buttonoptions atthe bottom ofthe screen.
 Note:
These on-screen buttonsdonot directly correspond tothe projectors remotecontrolbuttons:
 •
OK acts asthe Enter button
 •
Menu displays theprojectors menu
 5.
Toview information abouttheprojector, clicktheInfo tab.
 6.
Tochange projector, Crestron,andpassword settings,clicktheTools tab,select settings onthe
 displayed
screen,andclick Send .
 7.
When youfinish selecting settings,clickExittoexit theprogram.
 Parent
topic:Crestron RoomView Support
 70