Epson Projector PowerLite 4750W User Manual

Parent
topic:Locking theProjector s Buttons
 Installing
aSecurity Cable
 You
caninstall twotypes ofsecurity cablesonthe projector todeter theft.
 •
Use thesecurity slotonthe back ofthe projector toattach aKensington MicrosaverSecuritysystem,
 available
fromEpson.
 •
Use thesecurity cableattachment pointonthe projector toattach awire cable andsecure itto aroom
 fixture
orheavy furniture.
 Parent
topic:Projector SecurityFeatures
 Related
references
 Projector
Parts-Rear
 Projecting
TwoImages...

1.
Press theSplit button onthe remote control.
 The
currently selectedinputsource movestothe leftside ofthe screen.
 2.
Press theMenu button.
 You
seethisscreen:
 3.
Toselect aninput source forthe other image, selecttheSource setting,pressEnter,select the
 input
source, selectExecute ,and press Enter.(You canalso change imagesources, ifnecessary.)
 4.
Toswitch theimages, selecttheSwap Screens settingandpress Enter.
 5.
Tochange theimage sizes,select theScreen Sizesetting, pressEnter,select asizing...

7.
Toexit thesplit screen feature, presstheSplit orEsc button.
 Parent
topic:Adjusting ProjectorFeatures
 Using
Multiple Projectors
 You
cancombine theprojected imagesfromtwoormore projectors tocreate onelarge image. Follow
 the
instructions inthese sections tosetup andproject frommultiple projectors.
 Projector
Identification SystemforMultiple Projector Control
 Adjusting
thePosition ofthe Projected ImageFromMultiple Projectors
 Matching
theImage Colors
 Parent
topic:Adjusting ProjectorFeatures...

4.
Select Projector IDand press Enter.
 5.
Use thearrow buttons onthe remote controltoselect theidentification numberyouwant touse for
 the
projector. Thenpress Enter.
 Repeat
thesestepsforallthe other projectors youwant tooperate fromoneremote control.
 Parent
topic:Projector Identification SystemforMultiple Projector Control
 Setting
theRemote ControlID
 The
remote controls IDisset tozero bydefault soitcan operate anycompatible projector.Ifyou want to
 set
the remote controltooperate onlyaparticular...

3.
Hold down theIDbutton onthe remote controlwhileyoupress thenumeric buttonthatmatches the
 projectors
ID.Then release thebuttons.
 Note:
Ifyou dont know theprojectors ID,hold down theIDbutton andpress theHelp button to
 temporarily
displaytheprojectors IDon the screen. Ifthe batteries areleftout ofthe remote control
 for
anextended period,theremote controlIDreturns toits default setting.
 Parent
topic:Projector Identification SystemforMultiple Projector Control
 Adjusting
thePosition ofthe Projected...

Matching
theImage Colors
 You
canmatch thedisplay qualityofmultiple projectors thatwillproject nexttoeach other.
 Note:
Makesureyouselect Multi-Projection or3D Multi-Projection (for3Dimages ;PowerLite
 4855WU
only)forthe color mode. Brightness andcolors maynotmatch exactly evenafterperforming
 the
steps below.
 1.
Press theMenu button.
 2.
Select theExtended menuandpress Enter.
 3.
Select theMulti-Projection settingandpress Enter.
 4.
Select theMulti-screen settingandpress Enter.
 You
seethisscreen:...

12.
Ifyou need tomatch moreprojectors, repeatthesestepsmatching projector3to projector 2,4to 3,
 and
soon.
 Parent
topic:UsingMultiple Projectors
 Viewing
3DImages
 Using
anoptional polarizer and3Dglasses, youcanusetwoprojectors toproject andview passive 3D
 images
(PowerLite 4855WU).Seetheinstructions suppliedwiththeoptional equipment forsetup and
 use.

For
optimal viewing, selectthe3DImages settingfromtheSignal menuandselect oneofthe 3Dcolor
 modes.

Parent
topic:Adjusting ProjectorFeatures
 Saving...

5.
Select oneofthe following options:
 •
Load Memory :Overwrites yourcurrent settings withsaved settings
 •
Save Memory :Saves yourcurrent settings tomemory (10memories withdifferent namesare
 available)

Note:
Amemory namethatisbeing usedisindicated byagreen mark.Saving overapreviously
 saved
memory overwrites thesettings withyour current settings.
 •
Erase Memory :Erases theselected memorysettings
 •
Rename Memory:Renames asaved memory
 Parent
topic:Adjusting ProjectorFeatures
 Saving
aScheduled...

Viewing
Scheduled Events
 Editing
aScheduled Event
 Parent
topic:Adjusting ProjectorFeatures
 Viewing
Scheduled Events
 You
canview yourscheduled eventsonthe calendar displayed onthe Schedule Settingsscreen.
 A
colored rectangular boxonthe calendar indicates ascheduled event.
 The
colors indicate thefollowing:
 One-time
event
 Reoccurring
event
 Communication
ison/off
 Event
isinvalid
 Parent
topic:Saving aScheduled Event
 Editing
aScheduled Event
 You
caneditascheduled eventonthe calendar displayed...

4.
Press theleftorright arrow buttons tohighlight thedate onthe calendar containing thescheduled
 event
youwant toedit.
 5.
Press theupordown arrow buttons tohighlight theevent youwant toedit, then press Esc.
 6.
Select fromthefollowing options:
 •
On/Off :Enable ordisable theselected event.
 •
Edit :Edit thesettings forthe selected event.
 •
Clear :Delete theselected event.
 •
Add New:Add anew scheduled event.
 7.
When youarefinished, selectReturn andpress Enter.
 8.
Select Setup complete andselect...