Epson Projector PowerLite 4650 User Manual

							

10.
Toprevent displayofthe IPaddress onthe standby screen,turnoffIPAddress Display.
 11.
When youfinish selecting settings,selectComplete andfollow theon-screen instructions tosave
 your
settings andexitthemenus.
 Parent
topic:WiredNetwork Projection
 Wireless
NetworkProjection
 You
cansend images toyour projector throughawireless network. Todothis, youmust install the
 optional
Epson802.11b/g/n wirelessLANmodule, andthen setupyour projector andcomputer for
 wireless
projection.
 Note:
Ifyour projector isconnected viaaLAN cable toanetwork thatincludes awireless accesspoint,
 you
canconnect tothe projector wirelessly throughtheaccess pointusing theEasyMP Network
 Projection
softwarewithouttheneed forthe optional wireless module.
 After
installing themodule andsetting upthe projector, installthenetwork software fromtheEpson
 Projector
SoftwareCDonyour computer. Usethefollowing softwareanddocumentation toset up,
 control,
andmonitor wireless projection:
 •
EasyMP Network Projection softwaresetsupyour computer forwireless networkprojection. Seethe
 EasyMP
NetworkProjection OperationGuideforinstructions.
 •
EasyMP Monitorsoftware (Windows only)letsyou monitor andcontrol yourprojector throughthe
 network.
Youcandownload thelatest software anddocumentation fromtheEpson website. Goto
 www.epson.com/support
(U.S.)orwww.epson.ca/support (Canada)andselect yourprojector.
 Installing
theWireless LANModule
 Using
QuickWireless Connection (WindowsOnly)
 Selecting
WirelessNetworkSettingsManually
 Selecting
WirelessNetworkSettingsinWindows
 Selecting
WirelessNetworkSettingsinMac OSX
 Setting
UpWireless NetworkSecurity
 Parent
topic:UsingtheProjector onaNetwork
 Related
references
 Optional
Equipment andReplacement Parts
 51 
						

							

Installing
theWireless LANModule
 To
use theprojector overawireless network, installtheoptional Epson802.11b/g/n wirelessLAN
 module.
Donot install anyother typeofwireless LANmodule.
 Caution:
Neverremove themodule whileitsindicator lightisgreen orflashing, orwhile youare
 projecting
wirelessly. Youmay damage themodule orlose data.
 1.
Turn offthe projector andunplug thepower cord.
 2.
Slide theairfilter cover latchandopen theairfilter cover.
 52  
						

							

3.
Loosen thescrew securing thewireless LANmodule cover,thenremove thecover.
 4.
Insert thewireless LANmodule intotheport.
 53   
						

							

5.
Replace thewireless LANmodule coverandsecure itusing thescrew youloosened.
 6.
Close theairfilter cover.
 7.
Plug inand turn onthe projector.
 Parent
topic:Wireless NetworkProjection
 Related
references
 Optional
Equipment andReplacement Parts
 Using
Quick Wireless Connection (WindowsOnly)
 You
canusetheoptional QuickWireless Connection USBkeytoquickly connect yourcomputer tothe
 projector
wirelessly. Thenyoucanproject yourpresentation andremove thekey when youaredone.
 Note:
Makesuretheoptional wireless LANmodule isinstalled andtheprojector isconnected wirelessly
 to
your network.
 1.
Turn onthe projector.
 2.
Press theLAN button onthe remote control.
 You
seeascreen likethis:
 54  
						

							

3.
Verify thecorrect SSIDandIPaddress isdisplayed, thenremove thewireless LANmodule fromthe
 projector.

4.
Insert theQuick Wireless Connection USBkeyinto thesame portused forthe wireless LANmodule.
 You
seeaprojected messagethatthenetwork information updateiscomplete.
 5.
Remove theUSB key.
 6.
Reinsert thewireless LANmodule intotheprojector.
 55  
						

							

7.
Now connect theUSB keytoaUSB portonyour computer ornotebook.
 Note:
InWindows Vista,ifyou seetheAutoPlay window,selectRunLaunchU3.exe ,then select
 Allow
onthe next screen.
 8.
Follow theon-screen instructions toinstall theQuick Wireless Connection driver.
 Note:
Ifyou seeaWindows Firewallmessage, clickYestodisable thefirewall.
 After
afew minutes, yourcomputer imageisdisplayed bythe projector. Ifitdoes notappear, press
 the
LAN button onyour projector remotecontrolorrestart yourcomputer.
 9.
Run your presentation asnecessary.
 10.
When youfinish projecting wirelessly, removetheUSB keyfrom yourcomputer.
 Note:
Youmay need torestart yourcomputer toreactivate yourwireless LANconnection.
 Parent
topic:Wireless NetworkProjection
 Selecting
WirelessNetworkSettingsManually
 Before
youcanproject fromyourwireless network, youmust select thenetwork settingsforthe projector
 using
itsmenu system.
 1.
Turn onthe projector.
 2.
Press theMenu button.
 56 
						

							

3.
Select theNetwork menuandpress Enter.
 4.
Select Network Configuration andpress Enter.
 5.
Select theBasic menuandpress Enter.
 57 
						

							

6.
Select thefollowing basicoptions asnecessary:
 •
Projector Nameletsyou enter aname upto16 alphanumeric characterslongtoidentify the
 projector
overthenetwork.
 •
PJLink Password letsyou enter apassword upto32 alphanumeric characterslongforusing the
 PJLink
protocol forprojector control.
 •
Web Control Password letsyou enter apassword upto8alphanumeric characterslongfor
 accessing
theprojector overtheweb.
 •
Projector Keywordletsyou turn onasecurity password toprevent accesstothe projector by
 anyone
notinthe room withit.You must enter adisplayed, randomized keywordfromacomputer
 using
theEasyMP NetworkProjection softwaretoaccess theprojector.
 Note:
Usethedisplayed keyboardtoenter thename, passwords andkeyword. Pressthearrow
 buttons
onthe remote controltohighlight characters andpress Enter toselect them.
 7.
Select theWireless LANmenu andpress Enter.
 8.
Select thesettings onthe Wireless LANmenu asnecessary foryour network.
 9.
When youfinish selecting settings,selectComplete andfollow theon-screen instructions tosave
 your
settings andexitthemenus.
 After
youcomplete thewireless settingsforyour projector, youneed toselect thewireless networkon
 your
computer.
 58 
						

							

Wireless
LANMenu Settings
 Parent
topic:Wireless NetworkProjection
 Wireless
LANMenu Settings
 Note:
Seeyour projectors EasyMPNetworkProjection OperationGuidefordetails onselecting these
 settings.

Setting
 Options
 Description

Wireless
LANPower
 On
 Turns
onwireless LANsupport
 Off

Connection
Mode
 Quick
 Selects
thetype ofwireless
 connection:

Advanced

Quick
:lets you quickly connect
 to
one computer oruse the
 optional
QuickWireless
 Connection
USBKeytoconnect
 Advanced
:lets you connect to
 multiple
computers viaawireless
 network
accesspoint
 Channel
 1ch
 In
Quick connection mode,
 selects
thefrequency band
 6ch

(channel)
usedbythe wireless
 11ch

LAN

Wireless
LANSys.
 802.11b/g
 Sets
thetype ofwireless LAN
 system
theprojector is
 802.11b/g/n

connecting
to
 SSID
AutoSetting
 On
 Turns
onautomatic SSID
 searching
inQuick connection
 Off

mode;
settoOff when
 connecting
tomultiple projectors
 at
the same time
 SSID
 Up
32alphanumeric characters
 Sets
theSSID (network name)of
 the
wireless LANsystem the
 projector
isconnecting to
 59 
						

							

Setting
 Options
 Description

IP
Settings
 DHCP
(On orOff )
 Selects
DHCPifyour network
 assigns
addresses automatically,
 IP
Address
 or
turns offDHCP soyou can
 Subnet
Mask
 enter
thenetworks IPaddress,
 subnet
mask,andgateway
 Gateway
Address
 address
asneeded
 SSID
Display
 On
 Selects
whether todisplay the
 SSID
onthe network standby
 Off

screen

IP
Address Display
 On
 Selects
whether todisplay theIP
 address
onthe network standby
 Off

screen

Parent
topic:Selecting WirelessNetworkSettingsManually
 Selecting
WirelessNetworkSettingsinWindows
 Before
connecting tothe projector, selectthecorrect wireless networkonyour computer.
 1.
Toaccess yourwireless utilitysoftware, double-click thenetwork icononthe Windows taskbar.
 2.
Doone ofthe following:
 •
Ifyour projector isset uponanexisting network (Advanced mode),selectthenetwork name
 (SSID).

•
Ifyour projector isconfigured forQuick mode, selecttheSSID youassigned tothe projector.
 3.
Click Connect .
 Parent
topic:Wireless NetworkProjection
 Selecting
WirelessNetworkSettingsinMac OSX
 Before
connecting tothe projector, selectthecorrect wireless networkinMac OSX.
 1.
Click theAirPort icononthe menu baratthe topofthe screen.
 2.
Make sureAirPort isturned on,then doone ofthe following:
 •
Ifyour projector isset uponanexisting network (Advanced mode),selectthenetwork name
 (SSID).

•
Ifyour projector isconfigured forQuick mode, selecttheSSID youassigned tothe projector.
 60