Epson Projector PowerLite 3100 User Manual

							

41
7.
Press theLAN button onthe remote controlorselect Display theQRCode inthe projectors
 Network
menu.(Youcanalso press theHome button onthe remote controlandselect Display the
 QR
Code onthe Home screen.)
 Your
projector displaystheQR code onthe projection surface.
 Note:
Ifyou donot see theQR code afterpressing theLAN button, pressEnter todisplay it.
 8.
Start Epson iProjection onyour mobile device.
 9.
Use theQR code reader feature toread theQR code andconnect yourdevice tothe projector. Visit
 epson.com/projectorapp
(U.S.)orepson.ca/projectorapp (Canada)forinstructions.
 Parent
topic:Wireless NetworkProjection
 Searching
foraWireless Network
 You
canuseyour projectors sitesurvey function toquickly locateandconnect toavailable wireless
 networks.

1.
Turn onthe projector.
 2.
Press theMenu button.
 3.
Select theNetwork menuandpress Enter.
 4.
Select Network Configuration andpress Enter. 
						

							

42
5.
Select theWireless LANmenu andpress Enter.
 6.
Select Advanced asthe Connection Modesetting andpress Enter.
 7.
Select Search Access Pointandpress Enter.
 8.
Select thename ofthe wireless networkyouwant toconnect toand press Enter.
 9.
Ifthe network hassecurity enabled, enterthewireless password.
 You
seeascreen likethis: 
						

							

43
10.
Select thesettings onthe Security menuasnecessary foryour network.
 11.
When youfinish selecting settings,selectComplete andfollow theon-screen instructions tosave
 your
settings andexitthemenus.
 Parent
topic:Wireless NetworkProjection
 Selecting
WirelessNetworkSettingsinWindows
 Before
connecting tothe projector, selectthecorrect wireless networkonyour computer.
 1.
Toaccess yourwireless utilitysoftware, accesstheDesktop anddouble-click thenetwork iconon
 the
Windows taskbar.
 2.
Doone ofthe following:
 •
Ifyour projector isset uponanexisting network (Advanced mode),selectthenetwork name
 (SSID).

•
Ifyour projector isconfigured forQuick mode, selecttheprojectors SSID.
 3.
Click Connect .
 Parent
topic:Wireless NetworkProjection
 Selecting
WirelessNetworkSettingsinOS X
 Before
connecting tothe projector, selectthecorrect wireless networkinOS X.
 1.
Click theAirPort icononthe menu baratthe topofthe screen.
 2.
Make sureAirPort isturned on,then doone ofthe following:
 •
Ifyour projector isset uponanexisting network (Advanced mode),selectthenetwork name
 (SSID).

•
Ifyour projector isconfigured forQuick mode, selecttheprojectors SSID.
 Parent
topic:Wireless NetworkProjection
 Enabling
WPAorWPA2 Security
 Set
upthe WPA orWPA2 security settingstomatch yournetworks settings.Checkwithyour network
 administrator
forguidance onentering thecorrect information.
 1.
Turn onthe projector.
 2.
Press theMenu button. 
						

							

44
3.
Select theNetwork menuandpress Enter.
 4.
Select Network Configuration andpress Enter.
 5.
Select theSecurity menuandpress Enter.
 6.
Select thesettings onthe Security menuasnecessary foryour network.
 7.
When youfinish selecting settings,selectComplete andfollow theon-screen instructions tosave
 your
settings andexitthemenus.
 Wireless
SecurityMenuSettings
 Parent
topic:Wireless NetworkProjection
 Wireless
SecurityMenuSettings
 Settings
onthe Security menuletyou select thetype ofsecurity andsecurity settingsthatmatch the
 network
youareconnecting theprojector to.
 Setting
 Options
 Description

Security
 No

WPA2-PSK

WPA/WPA2-PSK
 Selects
thetype ofsecurity used
 on
the wireless network 
						

							

45
Setting
 Options
 Description

Passphrase
 —
 For
theselected security,selects
 the
pre-shared passphrase used
 on
the network
 Parent
topic:Enabling WPAorWPA2 Security 
						

							

46
Using
BasicProjector Features
 Follow
theinstructions inthese sections touse your projectors basicfeatures.
 Turning
Onthe Projector
 Turning
Offthe Projector
 Viewing
3DImages
 Selecting
theLanguage forthe Projector Menus
 Adjusting
theImage Height
 Adjusting
theImage Position UsingLensShift
 Image
Shape
 Resizing
theImage withtheZoom Ring
 Focusing
theImage UsingtheFocus Ring
 Remote
ControlOperation
 Selecting
anImage Source
 Projection
Modes
 Image
Aspect Ratio
 Color
Mode
 Turning
Onthe Projector
 Turn
onthe computer orvideo equipment youwant touse before youturn onthe projector soitcan
 display
theimage source.
 1.
Remove theprojectors lenscover.  
						

							

47
2.
Connect thepower cordtothe projectors powerinlet.
 3.
Plug thepower cordintoanelectrical outlet.
 Note:
WithDirect Power Onturned on,theprojector turnsonassoon asyou plug itin.
 4.
Press thepower button onthe projector orthe Onbutton onthe remote controltoturn onthe
 projector.

The
status lightflashes blueasthe projector warmsup.Once theprojector iswarmed up,thestatus
 light
stops flashing andturns blue.
 Warning:
Neverlookintotheprojector lenswhen thelamp ison. This candamage youreyes andis
 especially
dangerous forchildren.
 If
you donot see aprojected imagerightaway, trythe following:
 •
Turn onthe connected computerorvideo device.
 •
Insert aDVD orother video media andpress theplay button, ifnecessary.
 •
Press thebutton forthe video source onthe remote control.
 •
Ifthe Home screen isdisplayed, selectthesource youwant toproject.
 Using
theHome Screen
 Parent
topic:UsingBasicProjector Features
 Related
references
 Projector
SetupSettings -Extended Menu  
						

							

48
Using
theHome Screen
 You
canselect inputsources andother frequently usedoptions fromtheHome screen.
 1.
Todisplay theHome screen, doone ofthe following:
 •
Press theHome button onthe remote control.
 •
Turn onthe projector withtheHome Screen AutoDispsetting enabled.
 •
Turn onthe projector whennosignal isreceived fromtheselected inputsource.
 2.
Press thearrow buttons onthe remote controlorcontrol paneltonavigate thescreen, andpress
 Enter
toselect anoption.
 1
 Select
thevideo source youwant toproject
 2
 Display
theQR code
 3
 Display
theprojector s menus
 4
 Select
customizable menuoptions
 5
 Select
tochange the3Dsettings
 6
 Select
tochange theColor Mode
 Note:
Youcanselect thecustomizable menuoptions usingtheCustom Function 1and Custom
 Function
2settings inthe Extended menu. 
						

							

49
3.
Press theHome button tohide theHome screen.
 Parent
topic:Turning Onthe Projector
 Related
references
 Projector
SetupSettings -Extended Menu
 Turning
Offthe Projector
 Before
turning offthe projector, shutdown anycomputer connected toitso you canseethecomputer
 display
duringshutdown.
 Note:
Turnoffthis product whennotinuse toprolong thelifeofthe projector. Lamplifewill vary
 depending
uponmode selected, environmental conditions,andusage. Brightness decreasesovertime.
 Note:
When usingtheA/V Mute feature, theprojector lampisstill on.Toturn offthe lamp, turnoffthe
 projector.

1.
Press thepower button onthe projector orthe Standby buttononthe remote control.
 The
projector displaysashutdown confirmation screen.
 2.
Press thepower button onthe projector orthe Standby buttononthe remote controlagain.(To
 leave
iton, press anyother button.)
 The
lamp andthestatus lightturnoff. 
						

							

50
3.
Totransport orstore theprojector, makesurethestatus lightisoff, then unplug thepower cord.
 Caution:
Toavoid damaging theprojector orlamp, never unplug thepower cordwhen thestatus
 light
ison orflashing.
 4.
Replace theprojectors lenscover.
 Parent
topic:UsingBasicProjector Features
 Related
tasks
 Shutting
Offthe Picture andSound Temporarily
 Transporting
theProjector