Epson Projector PowerLite 2045 User Manual
Have a look at the manual Epson Projector PowerLite 2045 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Projection Modes Depending onhow youpositioned theprojector, youmay need tochange theprojection modesoyour images projectcorrectly. • Front (default setting)letsyou project fromatable infront ofthe screen. • Front/Ceiling flipstheimage overtop-to-bottom toproject upside-down fromaceiling orwall mount. • Rear flipstheimage horizontally toproject frombehind atranslucent screen. • Rear/Ceiling flipstheimage overtop-to-bottom andhorizontally toproject fromtheceiling andbehind a translucent screen. Changing theProjection ModeUsing theMenus Parent topic:UsingBasicProjector Features Changing theProjection ModeUsing theMenus You canchange theprojection modetoflip the image overtop-to-bottom and/orleft-to-right usingthe projector menus. 1. Turn onthe projector anddisplay animage. 2. Press theMenu button. 3. Select theExtended menuandpress Enter. 4. Select theProjection settingandpress Enter. 71
5. Select aprojection modeandpress Enter. 6. Press Menu orEsc toexit themenus. Parent topic:Projection Modes Related concepts Projector Placement Image Aspect Ratio The projector candisplay images indifferent width-to-height ratioscalled aspect ratios.Normally the input signal fromyourvideo source determines theimages aspectratio.However, forcertain images you canchange theaspect ratiotofityour screen bypressing abutton onthe remote control. If you always wanttouse aparticular aspectratioforacertain videoinputsource, youcanselect itusing the projectors menus. Changing theImage Aspect Ratio Available ImageAspect Ratios Parent topic:UsingBasicProjector Features Changing theImage Aspect Ratio You canchange theaspect ratioofthe displayed imagetoresize it. Note: ForHDMI sources, theinput signal determines theimages aspectratio. 1. Turn onthe projector andswitch tothe image source youwant touse. 2. Press theMenu button. 72
3. Select theSignal menuandpress Enter. 4. Select Aspect andpress Enter. 5. Select theaspect ratioyouwant touse foryour input signal andpress Enter. 6. Select MenuorExit toexit themenus. Parent topic:Image Aspect Ratio Available ImageAspect Ratios You canselect thefollowing imageaspect ratios,depending onthe input signal fromyourimage source. Note: When theprojector isin 3D mode, theaspect ratioisautomatically settoNormal . Note: Blackbands andcropped imagesmayproject incertain aspectratios,depending onthe aspect ratio andresolution ofyour input signal. Aspect ratiosetting Description Auto Automatically setstheaspect ratioaccording tothe input signal. Normal Displays imagesusingthefullprojection areaandmaintains the aspect ratioofthe image. Zoom Displays imagesusingthefullwidth ofthe projection areaand maintains theaspect ratioofthe image. 73
Aspect ratiosetting Description Full Displays imagesusingthefullwidth ofthe projection area,butdoes not maintain theaspect ratio. Note: TheAuto aspect ratiosetting isavailable onlyforHDMI image sources. Parent topic:Image Aspect Ratio Color Mode The projector offersdifferent ColorModes toprovide optimum brightness, contrast,andcolor fora variety ofviewing environments andimage types.Youcanselect amode designed tomatch yourimage and environment, orexperiment withtheavailable modes. If you always wanttouse aparticular colormode foracertain videoinputsource, youcanselect itusing the projector menus. Changing theColor Mode Available ColorModes Turning OnAuto Iris Parent topic:UsingBasicProjector Features Related references Image Quality Settings -Image Menu Changing theColor Mode You canchange theprojectors ColorMode usingtheremote controltooptimize theimage foryour viewing environment. 1. Turn onthe projector andswitch tothe image source youwant touse. 2. Ifyou areprojecting fromaDVD player orother video source, insertadisc orother video media and press theplay button, ifnecessary. 74
3. Press theColor Mode button onthe remote controltochange theColor Mode. A list ofavailable ColorModes appears. 4. Tocycle through allthe available ColorModes foryour input signal, presstheupordown arrow button. 5. Press Entertoselect aColor Mode. Parent topic:ColorMode Available ColorModes You cansetthe projector touse these ColorModes, depending onthe input source youareusing: 2D Images Color Mode Description Dynamic Best forprojecting inabright room Bright Cinema Best formovies projected inabright room Natural Best forprojecting inadark room Cinema Best formovies projected inadark room 3D Images 75
Color Mode Description 3D Dynamic Best forprojecting inabright room 3D Cinema Best formovies projected inadark room Parent topic:ColorMode Turning OnAuto Iris In certain colormodes, youcanturn onthe Auto Irissetting toautomatically optimizetheimage based on the brightness ofthe content youproject. 1. Turn onthe projector andswitch tothe image source youwant touse. 2. Press theMenu button. 3. Select theImage menuandpress Enter. 4. Select theAuto Irissetting andchoose oneofthe following: • High Speed toadjust brightness assoon asthe scene changes. • Normal forstandard brightness adjustment. Note: YoucansetAuto Irisforeach Color Mode thatsupports thefeature. 5. Press Menu orEsc toexit themenus. 76
Parent topic:ColorMode Controlling theVolume withtheVolume Buttons You canusetheVolume buttonsonthe projector orthe remote controltoadjust thevolume asyou project apresentation withaudio. Thevolume buttons controltheprojector ’s internal speaker systemor any external speakers youconnected tothe projector. You must adjust thevolume separately foreach connected inputsource. 1. Turn onthe projector andstart apresentation thatincludes audio. 2. Tolower orraise thevolume, presstheVolume buttonsonthe remote controlorthese buttons on the control panel. A volume gaugeappears onthe screen. 3. Toset the volume toaspecific levelforaninput source, usetheprojector menus. Parent topic:UsingBasicProjector Features Related references Projector FeatureSettings -Settings Menu Projecting aSlide Show You canuseyour projectors Slideshowfeaturewhenever youconnect aUSB device thatcontains compatible imagefiles.Thisletsyou quickly andeasily display aslide show, andcontrol itusing the projectors remotecontrol. Supported SlideshowFileTypes Slideshow Features Starting aSlide Show Parent topic:UsingBasicProjector Features 77
Related concepts USB Device Projection Related tasks Connecting aUSB Device orCamera tothe Projector Supported SlideshowFileTypes You canproject thesetypesoffiles using theprojectors Slideshowfeature. Note: Forbest results, placeyourfilesonmedia thatisformatted inFAT16/32. File contents File type Details (extension) Image .jpg Make surethefileisnot: • CMYK format • Progressive format • Highly compressed • Above 8192×8192 resolution Parent topic:Projecting aSlide Show Slideshow Features Your projectors Slideshowfeatureletsyou dothe following: • Display individual images • Present aslide show ofall images inafolder Parent topic:Projecting aSlide Show Starting aSlide Show After connecting aUSB device tothe projector, youcanswitch tothe USB input source andstart your slide show. Note: Youcanchange theSlideshow operationoptionsoradd special effectsbyhighlighting Optionat the bottom ofthe screen andpressing Enter. 78
1. Press theSlideshow buttononthe projector remotecontrol. The Slideshow screenappears. 2. Dothe following asnecessary tolocate yourfiles: • Ifyou need todisplay filesinside asubfolder onyour device, pressthearrow buttons tohighlight the folder andpress theEnter button. • To move backupafolder levelonyour device, highlight BacktoTop andpress Enter. • To view additional imagesinafolder, highlight Nextpage orPrevious pageandpress Enter. 3. Doone ofthe following tostart your slide show: • To display anindividual image,pressthearrow buttons tohighlight theimage andpress Enter. (Press theEsc button toreturn tothe filelistscreen.) • To display aslide show ofall the images inafolder, pressthearrow buttons tohighlight the Slideshow optionatthe bottom ofthe screen andpress Enter. Note: Ifany filenames arelonger than8characters orinclude unsupported symbols,thefilenames may beshortened orchanged onlyinthe screen display. 4. While projecting, usethefollowing commands tocontrol thedisplay asnecessary: • To rotate adisplayed image,presstheupordown arrow button. • To move tothe next orprevious image,presstheleftorright arrow button. 79
5. Tostop thedisplay, followtheon-screen instructions orpress theEsc button. Slideshow DisplayOptions Parent topic:Projecting aSlide Show Related tasks Connecting aUSB Device orCamera tothe Projector Disconnecting aUSB Device orCamera FromtheProjector Slideshow DisplayOptions You canselect thesedisplay options whenusingtheprojectors Slideshowfeature. Setting Options Description Display Order Name Order Displays filesinname order Date Order Displays filesindate order Sort Order In Ascending Sorts filesinfirst-to-last order In Descending Sorts filesinlast-to-first order Continuous Play On Displays aslide show continuously Off Displays aslide show onetime through 80