Epson Projector PowerLite 2045 User Manual

3.
Onyour computer ormobile device, opentheIntel WiDi software.
 You
seealist ofavailable devices.
 4.
Select yourprojectors DisplayNamefromthelist.
 5.
Ifyou seethePIN entry screen onyour computer ormobile device, enterthePIN code displayed on
 the
projectors ScreenMirroring standbyscreenoratthe bottom rightofthe projected image.
 The
projector displaystheimage fromyourmobile device.
 Note:
Itmay some timetoestablish theWiDi connection. Donot disconnect theprojectors power
 cord
while itis connecting...

3.
Onyour mobile device, usetheMiracast functiontosearch forthe projector.
 Note:
Seeyour mobile devices documentation forinformation onaccessing theMiracast function.
 You
seealist ofavailable devices.
 4.
Select yourprojector fromthelist.
 5.
Ifyou seethePIN entry screen onyour mobile device, enterthePIN code displayed onthe Screen
 Mirroring
standbyscreenoratthe bottom rightofthe projected image.
 The
projector displaystheimage fromyourmobile device.
 Note:
Itmay takesome timetoestablish...

Using
BasicProjector Features
 Follow
theinstructions inthese sections touse your projectors basicfeatures.
 Turning
Onthe Projector
 Turning
Offthe Projector
 Viewing
3DImages
 Selecting
theLanguage forthe Projector Menus
 Adjusting
theImage Height
 Image
Shape
 Resizing
theImage withtheZoom Ring
 Focusing
theImage UsingtheFocus Ring
 Remote
ControlOperation
 Selecting
anImage Source
 Projection
Modes
 Image
Aspect Ratio
 Color
Mode
 Controlling
theVolume withtheVolume Buttons
 Projecting
aSlide Show...

1.
Slide theprojectors lenscover untilitclicks intotheopen position.
 54  

2.
Connect thepower cordtothe projectors powerinlet.
 3.
Plug thepower cordintoanelectrical outlet.
 Note:
WithDirect Power Onturned on,theprojector turnsonassoon asyou plug itin.
 The
projectors powerlightturns blue.Thisindicates thattheprojector isreceiving power.
 4.
Press thepower button onthe projector orthe remote controltoturn onthe projector.
 The
projector beepsandtheStatus lightflashes blueasthe projector warmsup.Once theprojector
 is
warmed up,theStatus lightstops flashing andturns blue....

•
Turn onthe connected computerorvideo device.
 •
Insert aDVD orother video media andpress theplay button, ifnecessary.
 •
Press thebutton forthe video source onthe remote control.
 •
Press theSource buttononthe projector todetect thevideo source, orpress asource buttononthe
 remote
control.
 •
Ifthe Home screen isdisplayed, selectthesource youwant toproject.
 Parent
topic:UsingBasicProjector Features
 Related
references
 Projector
SetupSettings -Extended Menu
 Turning
Offthe Projector
 Before
turning...

3.
Totransport orstore theprojector, makesuretheStatus lightisoff, then unplug thepower cord.
 Caution:
Toavoid damaging theprojector orlamp, never unplug thepower cordwhen theStatus
 light
ison orflashing.
 57  

4.
Slide theprojectors lenscover untilitclicks intotheclosed position.
 Parent
topic:UsingBasicProjector Features
 Viewing
3DImages
 You
canview 3Dimages usingyourprojector. Viewing3Dimages requires a3D-compatible video
 device
andapair ofEpson RF3Dglasses (notincluded withyour projector). Youcanalso convert 2D
 images
to3D using the2D-to-3D Conversion settinginyour projectors Signal>3D Setup menu.
 You
canpurchase EpsonRF3Dglasses fromanEpson authorized reseller.Tofind thenearest reseller,
 call...

4.
Press the2D/3D buttononthe remote controltoactivate 3Dmode, ifnecessary.
 5.
Slide thepower switch onthe 3Dglasses tothe Onposition.
 6.
Putonthe 3Dglasses. Ifyou donot see a3D image, pairtheglasses withtheprojector.
 Note:
Ifyou change thevideo source oryou arenotwithin range ofyour projector, theglasses enter
 standby
modeandthestatus lightflashes green.Slidethepower switch onthe glasses tothe Off
 position
andthen back tothe Onposition toresume 3Dviewing.
 Pairing
the3DGlasses withtheProjector...

Related
tasks
 Connecting
toan HDMI Video Source
 Connecting
toaComputer forHDMI Video andAudio
 Pairing
the3DGlasses withtheProjector
 Pair
theglasses withtheprojector toestablish communication betweenthemfor3D viewing.
 1.
Turn onthe projector.
 2.
Settheimage source toHDMI.
 3.
Project a3D image.
 4.
Slide thepower switch onthe 3Dglasses tothe Onposition.
 5.
Move theglasses within10feet (3m) ofthe projector, thenholddown thePairing buttononthe
 glasses
foratleast three seconds.
 The
status...