Epson Projector PowerLite 1970W User Manual

Network
Projector E-mailAlertMessages
 When
aproblem occurswithanetworked projector,andyouselected toreceive e-mailalerts,you
 receive
ane-mail containing thefollowing information:
 •
Epson Projector onthe subject line
 •
The name ofthe projector experiencing aproblem
 •
The IPaddress ofthe affected projector
 •
Detailed information abouttheproblem
 Note:
Ifa critical problem causesaprojector toshut down, youmay notreceive ane-mail alert.
 Parent
topic:Setting UpProjector NetworkE-MailAlerts
 Setting...

5.
Enter uptotwo IPaddresses toreceive SNMPnotifications, using0to 255 foreach address field.
 Note:
Donot use these addresses: 127.x.x.xor224.0.0.0 through255.255.255.255 (wherexis a
 number
from0to 255).
 6.
Ifavailable, selectthePriority Gateway settingforyour network.
 7.
Ifyour network environment usesanAMX controller, turnonthe AMX Device Discovery settingto
 allow
theprojector tobe detected.
 8.
Ifyour network environment usesaCrestron RoomView controller,turnonthe Crestron RoomView
 setting...

Note:
Youmay need tolog inbefore youseetheWeb Control screen. Ifyou seealog inwindow,
 enter
yourusername andpassword. (Thedefault username isEPSONWEB andthedefault
 password
isadmin .)
 4.
Toselect projector menusettings, selectthename ofthe menu andfollow theon-screen instructions
 to
select settings.
 5.
Tocontrol projection remotely,selecttheWeb Remote option.
 You
seeascreen likethis:
 1
 Power
buttoncontrol
 2
 Selects
Computer portsource
 3
 Selects
VideoandHDMI portsources
 4
 Freeze...

10
 Volume
buttoncontrols
 11
 Closed
Caption control
 6.
Select theicon corresponding tothe projector functionyouwant tocontrol.
 Parent
topic:UsingtheProjector onaNetwork
 Crestron
RoomView Support
 If
you areusing theCrestron RoomView networkmonitoring andcontrol system, youcansetupyour
 projector
foruse onthe system. Crestron RoomView letsyou control andmonitor yourprojector usinga
 web
browser.
 Note:
Youcannot usetheEpson WebControl featureorthe Message Broadcasting plug-inforEasyMP
 Monitor...

4.
Select theOthers menuandpress Enter.
 5.
SettheCrestron RoomView settingtoOn toallow theprojector tobe detected.
 6.
When youfinish selecting settings,selectComplete andfollow theon-screen instructions tosave
 your
settings andexitthemenus.
 7.
Turn offthe projector, thenturniton again toenable thesetting.
 Parent
topic:Crestron RoomView Support
 Controlling
aNetworked ProjectorUsingCrestron RoomView
 Once
youhave setupyour projector touse Crestron RoomView, youcancontrol andmonitor projection...

You
seethisscreen:
 3.
Select theinput source thatyouwant tocontrol inthe Sources Listbox. Youcanscroll through
 available
sourcesusingtheupand down arrows inthe box.
 4.
Tocontrol projection remotely,clicktheon-screen buttonsthatcorrespond tothe projectors remote
 control
buttons. Youcanscroll through buttonoptions atthe bottom ofthe screen.
 Note:
These on-screen buttonsdonot directly correspond tothe projectors remotecontrolbuttons:
 •
OK acts asthe Enter button
 •
Menu displays theprojectors menu...

Using
BasicProjector Features
 Follow
theinstructions inthese sections touse your projectors basicfeatures.
 Turning
Onthe Projector
 Turning
Offthe Projector
 Selecting
theLanguage forthe Projector Menus
 Adjusting
theImage Height
 Image
Shape
 Resizing
theImage WiththeZoom Ring
 Focusing
theImage UsingtheFocus Ring
 Focusing
theImage withFocus Help
 Remote
ControlOperation
 Selecting
anImage Source
 Projection
Modes
 Image
Aspect Ratio
 Color
Mode
 Controlling
theVolume withtheVolume Buttons...

1.
Open theprojectors lenscover.
 2.
Connect thepower cordtothe projectors powerinlet.
 3.
Plug thepower cordintoanelectrical outlet.
 Note:
WithDirect Power Onturned on,theprojector turnsonassoon asyou plug itin.
 The
projectors powerlightturns blue.Thisindicates thattheprojector isreceiving power.
 68   

4.
Press thepower button onthe projector orthe remote controltoturn onthe projector.
 The
projector beepsandtheStatus lightflashes blueasthe projector warmsup.Once theprojector
 is
warmed up,theStatus lightstops flashing andturns blue.
 Warning:
Neverlookintotheprojector lenswhen thelamp ison. This candamage youreyes andis
 especially
dangerous forchildren.
 If
you donot see aprojected imagerightaway, trythe following:
 •
Verify thelens cover isopen allthe way.
 •
Turn onthe connected computerorvideo...

2.
Press thepower button again.(Toleave iton, press anyother button.)
 The
projector beepstwice,thelamp turns off,and theStatus lightturns off.
 Note:
WithEpsons InstantOfftechnology, thereisno cool-down periodsoyou canpack upthe
 projector
fortransport rightaway (ifnecessary).
 3.
Totransport orstore theprojector, makesuretheStatus lightisoff, then unplug thepower cord.
 Caution:
Toavoid damaging theprojector orlamp, never unplug thepower cordwhen theStatus
 light
ison orflashing.
 70