Epson Projector PowerLite 1940W User Manual

1.
Press theMenu button.
 2.
Select theNetwork menuandpress Enter.
 3.
Select Network Configuration andpress Enter.
 4.
Select theOthers menu(PowerLite 1940W/1950/1960) orthe Administrator Settingmenu
 (PowerLite
1945W/1955/1965) andpress Enter.
 PowerLite
1940W/1950/1960
 PowerLite
1945W/1955/1965
 71 

5.
SettheCrestron RoomView settingtoOn toallow theprojector tobe detected.
 6.
When youfinish selecting settings,selectComplete orSetup Complete andfollow theon-screen
 instructions
tosave yoursettings andexitthemenus.
 7.
Turn offthe projector, thenturniton again toenable thesetting.
 Parent
topic:Crestron RoomView Support
 Controlling
aNetworked ProjectorUsingCrestron RoomView
 Once
youhave setupyour projector touse Crestron RoomView, youcancontrol andmonitor projection
 using
acompatible...

3.
Select theinput source thatyouwant tocontrol inthe Sources Listbox. Youcanscroll through
 available
sourcesusingtheupand down arrows inthe box.
 4.
Tocontrol projection remotely,clicktheon-screen buttonsthatcorrespond tothe projectors remote
 control
buttons. Youcanscroll through buttonoptions atthe bottom ofthe screen.
 Note:
These on-screen buttonsdonot directly correspond tothe projectors remotecontrolbuttons:
 •
OK acts asthe Enter button
 •
Menu displays theConfiguration menu
 5.
Toview...

Using
BasicProjector Features
 Follow
theinstructions inthese sections touse your projectors basicfeatures.
 Turning
Onthe Projector
 Turning
Offthe Projector
 Selecting
theLanguage forthe Projector Menus
 Adjusting
theImage Height
 Image
Shape
 Resizing
theImage WiththeZoom Ring
 Focusing
theImage UsingtheFocus Ring
 Remote
ControlOperation
 Selecting
anImage Source
 Projection
Modes
 Image
Aspect Ratio
 Color
Mode
 Controlling
theVolume withtheVolume Buttons
 Projecting
aPC Free Presentation...

1.
Open theprojectors lenscover.
 2.
Connect thepower cordtothe projectors powerinlet.
 3.
Plug thepower cordintoanelectrical outlet.
 The
projectors powerlightturns orange. Thisindicates thattheprojector isreceiving power,butis
 not
yetturned on(itisin standby mode).
 75   

Note:
WithDirect Power Onturned on,theprojector turnsonassoon asyou plug itin.
 4.
Press thepower button onthe projector orthe remote controltoturn onthe projector.
 The
projector beepsandthepower lightflashes greenasthe projector warmsup.After about five
 seconds,
thepower lightstops flashing andturns green.
 Warning:
Neverlookintotheprojector lenswhen thelamp ison. This candamage youreyes andis
 especially
dangerous forchildren.
 If
you donot see aprojected imagerightaway, trythe following:
 •
Verify...

2.
Press thepower button again.(Toleave iton, press anyother button.)
 The
projector beepstwice,thelamp turns off,and thepower lightturns orange.
 Note:
WithEpsons InstantOfftechnology, thereisno cool-down periodsoyou canpack upthe
 projector
fortransport rightaway (ifnecessary).
 3.
Totransport orstore theprojector, makesurethepower lightisorange (butnotflashing), then
 unplug
thepower cord.
 Caution:
Toavoid damaging theprojector orlamp, never unplug thepower cordwhen thepower
 light
isgreen...

4.
Close theprojectors lenscover.
 Parent
topic:UsingBasicProjector Features
 Selecting
theLanguage forthe Projector Menus
 If
you want toview theprojectors menusandmessages inanother language, youcanchange the
 Language
setting.
 1.
Turn onthe projector.
 2.
Press theMenu button.
 78  

3.
Select theExtended menuandpress Enter.
 4.
Select theLanguage settingandpress Enter.
 5.
Select thelanguage youwant touse and press Enter.
 6.
Press Menu orEsc toexit themenus.
 Parent
topic:UsingBasicProjector Features
 Adjusting
theImage Height
 If
you areprojecting fromatable orother flatsurface, andtheimage istoo high orlow, youcanadjust
 the
image heightusingtheprojectors adjustablefeet.
 1.
Turn onthe projector anddisplay animage.
 2.
Toadjust thefront foot,pulluponthe foot release...

The
footextends fromtheprojector.
 3.
Release thelever tolock thefoot.
 4.
Ifthe image istilted, rotate therear feettoadjust theirheight.
 If
the projected imageisunevenly rectangular, youneed toadjust theimage shape.
 Parent
topic:UsingBasicProjector Features
 Related
concepts
 Image
Shape
 Related
references
 Projector
FeatureSettings -Settings Menu
 Image
Shape
 You
canproject anevenly rectangular imagebyplacing theprojector directlyinfront ofthe center ofthe
 screen
andkeeping itlevel. Ifyou place...