Epson Projector PowerLite 1940W User Manual

•
Use thesecurity slotonthe back ofthe projector toattach aKensington MicrosaverSecuritysystem,
 available
fromEpson.
 •
Use thesecurity cableattachment pointonthe projector toattach awire cable andsecure itto aroom
 fixture
orheavy furniture.
 Parent
topic:Projector SecurityFeatures
 Related
references
 Projector
Parts-Rear
 Projector
Identification SystemforMultiple Projector Control
 You
canoperate multiple projectors usingoneremote controlformore elaborate presentations. Todo
 this,
youassign...

Parent
topic:Adjusting ProjectorFeatures
 Setting
theProjector ID
 If
you want tocontrol multiple projectors fromaremote control, giveeach projector aunique ID.
 1.
Press theMenu button.
 2.
Select theExtended menuandpress Enter.
 3.
Select Projector IDand press Enter.
 4.
Use thearrow buttons onthe remote controltoselect theidentification numberyouwant touse for
 the
projector. Thenpress Enter.
 Repeat
thesestepsforallthe other projectors youwant tooperate fromoneremote control.
 Parent...

4.
Hold down theIDbutton onthe remote controlwhileyoupress thenumeric buttonthatmatches the
 projectors
ID.Then release thebuttons.
 5.
Press theIDbutton onthe remote controltocheck ifthe ID-setting processworked.
 You
seeamessage displayed bythe projector.
 •
Ifthe remote controlislisted asOn ,the remote controlIDisset tooperate onlythelisted projector.
 •
Ifthe remote controlislisted asOff ,the remote controlIDisnot setproperly. Repeatthesteps
 above
toset the IDtomatch theprojector youwant...

5.
Press theMenu button, selecttheExtended menu,andpress Enter.
 6.
Select theMulti-screen settingandpress Enter.
 7.
SettheAdjustment Levelsetting to1and press Enter.
 8.
Settheremote controlIDtomatch thesecond projector.
 9.
Access theExtended menuMulti-screen settingonthe second projector andsetthe Adjustment
 Level
setting to1.
 10.
Adjust theBrightness Correct.settingonthe projector withthedarkest displaysoitmatches the
 lighter
display, andpress Enter.(You mayneed toswitch theremote controlIDback...

Related
tasks
 Changing
theColor Mode
 Projecting
TwoImages Simultaneously
 You
canusethesplit screen feature tosimultaneously projecttwoimages fromdifferent imagesources
 next
toeach other. Youcancontrol thesplit screen feature usingtheremote controlorthe projector
 menus.

Note:
Whileyouusethesplit screen feature, otherprojector featuresmaynotbeavailable andsome
 settings
maybeautomatically appliedtoboth images.
 1.
Press theSplit button onthe remote control.
 The
currently selectedinputsource...

4.
Toswitch theimages, selecttheSwap Screens settingandpress Enter.
 5.
Tochange theimage sizes,select theScreen Sizesetting, pressEnter,select asizing option,
 press
Enter,and press Menu toexit.
 Note:
Depending onthe video inputsignals, theimages maynotappear atthe same sizeeven ifyou
 choose
theEqual setting.
 6.
Tochoose theaudio youwant tohear, select theAudio Source setting,pressEnter,select an
 audio
option, pressEnter,and press Menu toexit.
 Note:
Select Autotohear audio fromthelargest screen...

Adjusting
theMenu Settings
 Follow
theinstructions inthese sections toaccess theprojector menusystem andchange projector
 settings.

Using
theProjector s Menus
 Image
Quality Settings -Image Menu
 Input
Signal Settings -Signal Menu
 Projector
FeatureSettings -Settings Menu
 Projector
SetupSettings -Extended Menu
 Projector
NetworkSettings-Network Menu
 Projector
Information Display-Info Menu
 Projector
ResetOptions -Reset Menu
 Using
theProjector s Menus
 You
canusetheprojectors menustoadjust...

2.
Press theupordown arrow buttons tomove through themenus listedonthe left. The settings for
 each
menu aredisplayed onthe right.
 Note:
Theavailable settingsdependonthe current inputsource.
 3.
Tochange settings inthe displayed menu,pressEnter.
 4.
Press theupordown arrow button tomove through thesettings.
 5.
Change thesettings usingthebuttons listedonthe bottom ofthe menu screens.
 6.
Toreturn allthe menu settings totheir default values, selectReset.
 7.
When youfinish changing settingsonamenu,...

To
change settings foraninput source, makesurethesource isconnected andselect thatsource.
 Setting
 Options
 Description

Color
Mode
 See
thelistofavailable Color
 Adjusts
thevividness ofimage
 Modes
 colors
forvarious imagetypes
 and
environments
 Brightness
 Varying
levelsavailable
 Lightens
ordarkens theoverall
 image

Contrast
 Varying
levelsavailable
 Adjusts
thedifference between
 light
anddark areas ofthe image
 Color
Saturation
 Varying
levelsavailable
 Adjusts
theintensity ofthe image
 colors...

Setting
 Options
 Description

Auto
Iris
 On
 Adjusts
theprojected luminance
 based
onthe image brightness
 Off

when
certain ColorModes are
 selected

Note:
TheBrightness settingdoesnotaffect lampbrightness. Tochange thelamp brightness mode,
 use
thePower Consumption setting.
 Parent
topic:Adjusting theMenu Settings
 Related
references
 Available
ColorModes
 Input
Signal Settings -Signal Menu
 Normally
theprojector detectsandoptimizes theinput signal settings automatically. Ifyou need to
 customize...