Epson Projector Powerlite 1915 User Manual

3.
Select Yesandpress Enter.
 4.
Hold down theNum button onthe remote controlandusethenumeric buttonstoset afour-digit
 password.

The
password displaysas**** asyou enter it.Then youseetheconfirmation prompt.
 5.
Enter thepassword again.
 You
seethemessage Password accepted.
 6.
Press Esctoreturn tothe Password Protectmenu.
 7.
Make anote ofthe password andkeep itin asafe place incase youforget it.
 Parent
topic:Password SecurityTypes
 Selecting
Password SecurityTypes
 After
setting apassword,...

If
you donot see thismenu, holddown theFreeze buttononthe remote controlforfive seconds untilthe
 menu
appears.
 1.
Toprevent unauthorized useofthe projector, selectPower OnProtect ,press Enter,select On,and
 press
Esc.
 2.
Toprevent changes tothe Users Logoscreen orrelated display settings, selectUsers Logo
 Protect
,press Enter,select On,and press Esc.
 3.
Toprevent changes tonetwork settings, selectNetwork Protect,press Enter,select On,and press
 Esc
.
 You
canattach thePassword Protectstickertothe...

1.
Hold down theNum button onthe remote controlwhileyouenter thepassword usingthenumeric
 buttons.

The
password screencloses.
 2.
Ifthe password isincorrect, thefollowing mayhappen:
 •
You seeawrong password messageandaprompt totry again. Enterthecorrect password to
 proceed.

•
Ifthe password isincorrect threetimes, youseeamessage thattheprojector islocked anda
 request
code.Writedown thecode, thendisconnect thepower cordfrom theprojector, reconnect
 it,
turn theprojector backon,and enter thepassword...

1.
Display theimage youwant toproject asthe Users Logofromaconnected computerorvideo
 source.

2.
Press theMenu button, selecttheExtended menu,andpress Enter.
 3.
Select theUsers Logosetting andpress Enter.
 You
seeaprompt askingifyou want touse thedisplayed imageasausers logo.
 4.
Select Yesandpress Enter.
 You
seeaselection boxoverlaying yourimage.
 5.
Use thearrow buttons onthe remote controltosurround theimage areayouwant touse asthe
 Users
Logoandpress Enter.
 You
seeaprompt askingifyou want...

You
seetheUsers Logozoom factor menu.
 7.
Select azoom percentage andpress Enter.
 You
seeaprompt askingifyou want tosave theimage asthe Users Logo.
 8.
Select Yesandpress Enter.
 Note:
Ittakes afew moments forthe projector tosave theimage; donot use theprojector, itsremote
 control,
orany connected equipment untilitis finished.
 You
seeacompletion message.
 9.
Press Esctoexit themessage screen.
 10.
Select theExtended menuandpress Enter.
 11.
Select Display andpress Enter.
 12.
Select whenyouwant...

Locking
theProjector s Buttons
 You
canlock thebuttons onthe projectors controlpaneltoprevent anyonefromusing theprojector. You
 can
lock allthe buttons orall the buttons exceptthePower button.
 1.
Press theMenu button, selecttheSettings menu,andpress Enter.
 PowerLite
1830
 PowerLite
1915/1925W
 2.
Select theControl PanelLocksetting andpress Enter.
 106 

3.
Select oneofthese locktypes andpress Enter:
 •
To lock allofthe projectors buttons,selectFullLock .
 •
To lock allbuttons exceptthePower button, selectPartial Lock.
 You
seeaconfirmation prompt.
 4.
Select Yesandpress Enter.
 Unlocking
theProjector s Buttons
 Parent
topic:Projector SecurityFeatures
 Unlocking
theProjector s Buttons
 If
the projectors buttonshavebeen locked, holdtheEnter button onthe projectors controlpanelfor
 seven
seconds tounlock them.
 Parent
topic:Locking theProjector s...

Parent
topic:Projector SecurityFeatures
 Related
references
 Projector
Parts-Rear
 Projector
Identification SystemforMultiple Projector Control
 You
canoperate multiple projectors usingoneremote controlformore elaborate presentations. Todo
 this,
youassign anidentification numbertoeach projector andtothe remote control. Thenyoucan
 operate
allthe projectors atonce orindividually.
 You
canalso match thecolors displayed byany projectors youplan touse near each other.
 CAUTION:
Leaveatleast twofeet (60cm)...

3.
Use thearrow buttons onthe remote controltoselect theidentification numberyouwant touse for
 the
projector. Thenpress Enter.
 Repeat
thesestepsforallthe other projectors youwant tooperate fromoneremote control.
 Parent
topic:Projector Identification SystemforMultiple Projector Control
 Setting
theRemote ControlID
 The
remote controls IDisset tozero bydefault soitcan operate anycompatible projector.Ifyou want to
 set
the remote controltooperate onlyaparticular projector, youneed toset the remote...

6.
Toallow theremote controltooperate anycompatible projectorsagain(IDnumber iszero), repeat
 the
steps above andsetthe remote controlIDnumber to0.
 Parent
topic:Projector Identification SystemforMultiple Projector Control
 Matching
Multiple-Projector DisplayQuality
 You
canmatch thedisplay qualityofmultiple projectors thatwillproject nexttoeach other.
 1.
Turn onallthe projectors onwhich youwant tomatch thedisplay quality.
 2.
SetIDnumbers oneach projector.
 3.
Make sureallthe projectors areusing...