Epson Projector Moviemate 72 User Manual

							Using Epson MovieMate with Other Equipment31
Note: If your laptop cannot play movies on both the laptop display and an external display, you 
may need to disable the laptop display to view movies on MovieMate. See your laptop 
documentation for instructions.
8. Normally, MovieMate selects the correct aspect ratio automatically. If you need to change 
the aspect, press the   button on the remote control and select 
Normal, Full, or 
Zoom (if available). Make sure the toggle switch on the remote control is set to the 
Func.- position. 
						

							32Doing More with Epson MovieMate
Doing More with Epson 
MovieMate
Follow the instructions in this section to play music and photos on your Epson MovieMate, 
use advanced playback controls, and adjust various MovieMate features.
Playing Music and DivX Videos and Viewing 
Photos
You can play music CDs and CDs or USB devices with MP3, WMA, and DivX files. You can 
also view JPEG photos on CDs or USB devices.
Playing Music CDs
■To play a music CD, simply insert it in the slot. 
You can use most of the playback features, including pause, resume, 
fast forward, reverse, and skip to the next or previous track. See 
page 18 for instructions.
■You can also select a specific track by using the numeric buttons, as 
described on page 20. To use the numeric buttons, you need to set 
the toggle switch on the remote control to the 
-123 position.
■To turn on the lamp when playing music, press  . Press   to 
turn the lamp off.
Note: When you play music CDs, the lamp usually turns off automatically. 
						

							Doing More with Epson MovieMate33 Playing MP3/WMA Music or DivX Videos
You can play MP3 or WMA music files and DivX videos on CDs, DVDs, or USB devices. 
See page 64 for information on the types of discs that are supported. 
When you insert a disc or USB device that contains MP3, WMA, and/or DivX files, you see a 
list of files and/or folders:
1. Press   or   to select a folder or file.
To go to the next or previous page, press   or  .
2. Press   or   to begin playing the selected track or file.
When a file is finished playing, the next file in the sequence will 
start automatically.
■To turn off the lamp when playing music files, press  . 
To turn the lamp back on, press   again.
■When you play MP3 or WMA files, scrolling through the list of 
songs will pause the music until you highlight the next file. 
Note: You can use the Setup menu to change the way files are displayed. 
See page 42 for instructions. 
						

							34Doing More with Epson MovieMate
Viewing JPEG Photos
When you insert a disc or USB device that contains JPEG photo files, you see your photos 
displayed in a slideshow. 
If your photos are saved in folders, you see a list of files and/or folders (maximum 298 folders 
and 648 photos).
■Press   or   to select a folder or file, then press   to begin 
displaying the photos.
■To rotate an image, press   or  .
■To stop the slideshow and display a thumbnail screen, press  .
■To display the next or previous page of thumbnails, press   or  .
■To display the list of the files and folders, press  .
■If your disc or USB device includes both music files and JPEG photos, you can play a 
slideshow with music. 
1. To display the list of files, press  .
2. Select the music file you want and press   to start playing it.
3. Select the JPEG file you want and press   to start displaying the slideshow. 
						

							Doing More with Epson MovieMate35
Using Advanced Playback Controls
MovieMate provides advanced features for looping videos or music tracks and selecting titles, 
chapters, or tracks. On DVDs that include subtitles, multiple languages, or multiple camera 
angles, you can use the remote control for easy access to these features.
Repeating a Chapter, Title, Track, or File
You can select a chapter or title on a DVD to repeat continuously (or loop). You can also 
repeat a track on a music CD or an MP3, WMA, JPEG, or DivX file. 
1. To repeat a chapter, title, or track, press . You see an icon on the screen indicating the 
selected repeat option.
2. Press   again to cycle through the options for repeating.
■On a video DVD, you can repeat a chapter or title or select random play (Shuffle).
■On an audio or video CD, you can repeat one track or all tracks or select random 
play (Shuffle).
■For MP3, WMA, JPEG, and DivX files, you can repeat a file, all files in a folder on 
on a disc, or select random play (Shuffle).
3. To cancel repeat play, press   until 
Repeat Off is displayed on the screen.
Changing the Play Sequence (Program Play)
You can create your own program for playing tracks on a music CD or chapters and titles on 
a DVD. Programs are saved for up to 10 discs, even after you change the CD or DVD.
1. Press  . You see the program screen, which allows you to set a 
playback sequence:
2. Set the toggle switch on the remote control to the 
-123 position. 
						

							36Doing More with Epson MovieMate
3. Use the numeric buttons to set the program order (up to 99 chapters, titles, or tracks). 
■Press  ,  ,  , or   to move the cursor.
■If a disc has more than 10 chapters or tracks, press   or   to display the next or 
previous page. Or, select 
Next or Previous on the screen and press  .
■To delete a track or chapter you have entered, select it and press  .
■To close the program screen, select Exit on the screen and press  .
4. To begin playing your programmed sequence, select 
Start on the screen and press  .
5. Set the toggle switch on the remote control back to the 
Func.- position.
6. To cancel the program, press  . 
7. To resume normal playback, stop play and press  .
Selecting Language, Subtitles, and Camera Angles
Some DVDs and DivX files allow you to display subtitles or select from several languages or 
camera angles. If these features are available, you can use the buttons on the remote control to 
select them.
1. Press the appropriate button on the remote control:
■To change the language of the video, press  .
■To display subtitles, press  . You may have a choice of subtitle languages or 
subtitle files (for DivX videos).
■To change camera angles, press  .
2. Press the button repeatedly to select the option you want.
Note: You can also use the Playback information screen, as described on page 37. For a list of 
language codes, see page 65. 
						

							Doing More with Epson MovieMate37 Using the Playback Information Screen
You can check the current playback status and change settings while you are playing a DVD, 
audio or video CD, or DivX video.
1. Press  . You see an information screen like the following below 
the projected image:
2. Press  , or   to select the item you want to set and press  .
3. Select the setting you want and press  .
You can set the title, chapter, track number, or start time using the 
numeric keys, as described on page 20. To use the numeric buttons, 
you need to set the toggle switch on the remote control to the 
-123 position.
After you press  , playback starts from the title, chapter, track, or time you selected.
Playing Video CDs with Playback Control (PBC)
When you insert a video CD with playback control (PBC), you see a menu like the following:
■To select the item you want to play, press  , or   or set the toggle switch on the 
remote control to the 
-123 position, then use the numeric buttons as described on 
page 20.
■To display the next or previous menu page, press   or   when the menu is 
displayed.
■To open the menu during playback, press  repeatedly until the menu you want is 
displayed.  
						

							38Doing More with Epson MovieMate
To use the Preview function, follow these steps:
1. Press   to display the preview menu:
2. Press  , or   and press   to select one of the following (each displays 6 images or 
tracks on a single screen page):
Track Digest: Plays the first 3 or 4 seconds of each track sequentially.
Disc Interval: Divides the total disc time by 6 and plays the first 3 or 4 seconds of each 
interval.
Track Interval: Divides each track into 6 intervals and plays the first 3 or 4 seconds of 
each interval.
■To return to the initial menu, select Menu and press  .
■To close the preview menu, select Exit and press  .
3. Select the track you want to see using the arrow buttons and press  . 
						

							Doing More with Epson MovieMate39
Customizing Epson MovieMate
You can limit children’s access, adjust the sound, and customize other 
features of MovieMate. Many of these settings are available by pressing 
the 
Setup or Visual Setup buttons on the remote control. 
Locking DVDs
You can lock up to 40 DVDs to prevent children from viewing them. 
When a disc is locked, you need to enter a password before you can play 
it.
1. Insert the DVD you want to lock. Press   twice to stop the video.
2. Press the   button on the remote control. You see the Language Setup Page:
3. Press   until you see the Others Setup Page.
4. Press   to highlight 
Disc Lock, then press   to change the setting. 
5. Press   to select 
Lock, then press  . 
6. Press   to highlight 
Password, then press   to change it.
7. Press   to select 
New Password.
8. Set the toggle switch on the remote control to the 
-123 position, then enter 6 digits using 
the numeric buttons. The first time you set a password, you need to enter enter 
000000 
in the Old Password column first, then enter the new password.
9. Enter the same digits again for 
Confirm PWD using the numeric buttons.
10. Press   to save your password.
Once a password is set, you will need to enter it before you can view the locked CD or 
DVD. If you forget your password, enter 
000000 in the Old Password column to reset 
the password.
Audio 
SetupOthers 
Setup 
						

							40Doing More with Epson MovieMate
11. Press   to exit the menu.
Locking the Power Button on the Control Panel
You can lock the   button on the control panel to prevent young children from accidentally 
turning on MovieMate and looking into the lens. (You can still turn on MovieMate using the 
remote control, so you may want to place it out of children’s reach. You will also be able to 
turn on MovieMate by holding down the   button on the control panel for at least 5 
seconds. 
Warning: Do not allow young children or pets to look into the projector lens when MovieMate is 
turned on. The lens projects bright light that may affect their vision.
1. Press   on the remote control. You see the Visual Setup menu:
2. Press   to highlight 
Option, then press   to select it.
3. Press   until you see 
Child Lock.
4. Press   or   to select On, then press  . 
5. Press   to exit the menu.
You need to restart MovieMate for the setting to take effect. 
Saving Power
The power turns off automatically when a DVD is stopped for more 
than 30 minutes. You can select a time to turn off MovieMate while a 
movie is playing, in case you fall asleep while watching. 
To select a sleep setting, press  . Continue pressing the button to 
select from the following settings:
■SLEEP OFF: The power switches off automatically after 
30 minutes of inactivity (default setting).
■SLEEP 10, 20, 30, 60, 90, 120, 150: The power switches off 
automatically after the number of minutes specified, whether or 
not a movie is playing. You can select from 
10 to 150minutes.