Epson Projector L1505U User Manual
Have a look at the manual Epson Projector L1505U User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
211 Setting OptionsDescription Test Pattern —Displays a test pattern to assist in adjusting the image; press the left or right arrow buttons on the remote control orEnteron the control panel to cycle through the available test patterns, or Escto cancel pattern display Memory Load Memory Save Memory Erase Memory Rename MemorySave customized sets of settings to memory 1 Available only when the Light Source Modesetting is set toCustom. 2 Available only when the Light Source Modesetting is set toCustomand theConstant Bright setting is set to On. Parent topic: Adjusting the Menu Settings Projector Setup Settings - Extended Menu Settings on the Extended menu let you customize various projector setup features that control its operation.
212 Setting OptionsDescription Home Screen —Adjust settings on the Home Screen Display —See theDisplay settings table in this topic Users Logo —Creates a screen that the projector displays to identify itself and enhance security Projection Front Front/Ceiling Rear Rear CeilingSelects the way the projector faces the screen so the image is oriented correctly Operation —See theOperation settings table in this topic A/V Settings A/V Output Monitor Out Audio SettingsSelects various audio and video output settings A/V Output: select to output audio and video to an external device when the projector is in standby mode (Standby Mode must be turned on to use this setting) Monitor Out: select the image source to output to an external device when the projector is in standby mode; when set to Auto, selects output from the Computer orBNC port depending on which was used when the projector went into standby mode Audio Settings: selects audio source to output
213 Setting OptionsDescription Standby Mode Communication On Communication OffEnable this setting to allow the following operations to occur when the projector is in standby mode: • Monitor and control the projector over a network • Output audio and video to an external device (A/V Output must be set to Always On) • Communication from the HDBaseT port (Control Communications must be set to On) HDBaseT Control Communications Extron XTPSelects the communication settings for connections to an HDBaseT transmitter or switcher Control Communications: enables or disables communication from the Ethernet and serial ports on the transmitter; turning on this setting disables the projectors LAN,RS- 232C, and Remoteports (Extron XTP must be turned off to use this setting) Extron XTP: set to Onwhen you connect an Extron XTP transmitter or switcher to the HDBaseT ports
214 Setting OptionsDescription Color Calibration Start Auto Adjustment Undo Redo Color UniformityAutomatically detects color deterioration and adjusts the color tone Start Auto Adjustment: automatically adjusts the color tone for the whole image Undo andRedo: undoes or redoes the auto adjustment Color Uniformity: adjusts the color tone balance for the whole image
215 Setting OptionsDescription Multi-Projection Projector ID Projector Grouping Tiling Geometry Correction Edge Blending Black Level Scale Screen MatchingSelect various options when projecting from multiple projectors Projector ID: sets the projector to a particular ID number which allows you to use a remote control to individually control projectors Projector Grouping: lets you select the projectors being used to project one image Tiling: sets the number of split screens and the position of each image Geometry Correction: corrects image distortion Edge Blending: blends the border between multiple images to create a seamless screen Black Level: adjusts the brightness and tone differences in overlapping images Scale: adjusts the scale of the images Screen Matching: adjusts the tint and brightness of the images Schedule Settings Various scheduling options Lets you schedule various projector tasks Language Various languages available Selects the language for projector menu and message displays (not changed byReset option) Display settings
216 Setting Description Menu Position Selects the position of the projector menu displayed on the screen Message Position Selects the position of messages displayed on the screen Messages Controls whether messages are displayed on the screen Display Background Selects the screen color or logo to display when no signal is received Startup Screen Controls whether a special screen appears when the projector starts up Standby Confirmation Displays a confirmation message after pressing the Standby button on the remote control Air Filter Notice Displays a message when a clog in the air filter is detected Screen Sets the aspect ratio and position of the projected image according to the type of screen being used Panel Alignment Corrects color misalignment in the projected image Color Uniformity Adjusts the color tone balance OSD Rotation Rotates the menu display 90° Operation settings Setting Description Direct Power On Turns on the projector when you plug it in Sleep Mode Automatically places the projector in standby mode after an interval of inactivity Sleep Mode Timer Sets the time before the projector automatically turns off (Sleep Mode must be turned on) High Altitude Mode Regulates the projector’s operating temperature at altitudes above 4921 feet (1500 m) Auto Source Search Automatically select an input source Auto Power On IfComputer orBNC is selected, the projector turns on when an input signal is detected from those ports
217 Setting Description A/V Mute Settings Adjusts the A/V Mute settings Fade-in: sets the number of seconds for a fade-in transition effect when displaying an image Fade-out: sets the number of seconds for a fade-out transition effect when hiding an image A/V Mute Timer: turns off the projector automatically if A/V Mute is enabled and 2 hours of inactivity has passed A/V Mute Release: selectA/V Muteif you want to use only the A/V Mute button to turn off A/V mute, or select Any Buttonto use any button to turn it off Advanced See the next table in this topic Date & Time Adjusts the projectors time and date settings Lens Calibration Displays information about the lens currently in use Advanced settings Setting Description BNC Sync Termination Sets the termination for the signal from the BNC port (set to off unless you need analog termination, such as for switchers) Remote Control Type SelectNormal to use the remote control that came with the projector, or Simpleto use a different Epson projector remote control and disable the remote control that came with the projector Beep Controls the beep that sounds when you turn the projector on or off Indicators SelectOffto turn off projector lights, except warning lights Instant Off SelectEnabled to place the projector in standby mode after turning it off, or Disabledto place the projector in standby mode approximately 75 seconds after turning it off Inv Direction Button Enable this setting if you installed the projector on a ceiling and want to invert the direction of the arrow buttons on the control panel
218 Setting Description HDMI DDC Buffer If you are projecting using an HDMI extension cable and the image is not displayed correctly, enabling this setting may improve image quality DVI-D DDC Buffer If you are projecting using a DVI extension cable and the image is not displayed correctly, enabling this setting may improve image quality Lens Type Select the model number for the attached lens when using the following lenses: ELPLS04, ELPLU02, ELPLR04, ELPLW04, ELPLM06, ELPLM07, ELPLL07 Parent topic: Adjusting the Menu Settings Projector Network Settings - Network Menu Settings on the Network menu let you view network information and set up the projector for monitoring and control over a network. Setting OptionsDescription Wireless Mode Wireless LAN On OffEnable or disable wireless communication
219 Setting OptionsDescription Net. Info - Wireless LAN Connection mode Wireless LAN Sys. Antenna level Projector Name SSID DHCP IP Address Subnet Mask Gateway Address MAC Address Region CodeDisplays wireless network status and details Net. Info - Wired LAN Projector Name DHCP IP Address Subnet Mask Gateway Address MAC AddressDisplays wired network status and details Display the QR Code —Displays the QR Code Network Configuration Accesses additional network menusConfigures your network settings Parent topic: Adjusting the Menu Settings
220 Projector Information Display - Info Menu You can display information about the projector and input sources by viewing the Info menu. However, you cannot change any settings in the menu. Note:The total operating timer does not register any hours until you have used the projector for at least 10 hours. Available settings depend on the current input source.