Epson Projector L1505U User Manual

							161
•
Bto adjust the blue color convergence
Note: You can adjust only the red or blue color convergence; you cannot adjust the standard green
color panel.
8. Select the Pattern Color setting and press Enter.
9. Select the pattern you want to use and press Esc.
10. Select Start Adjustments and pressEntertwice.
You see this screen:
11. Use the arrow buttons on the remote control to adjust the color alignment in the corner of the screen highlighted by the orange box.
12. Press the Enterbutton to move to the next corner of the screen.
13. When you are finished adjusting each corner of the screen, press Enter. 
						

							162
You see this screen:
14. Do one of the following: • If your projectors panel alignment is now correct, select Exitand press Enterto return to the
Panel Alignment menu.
• If your projector needs additional panel alignment, select Select intersection and adjustand
press Enter. Use the arrow keys on the remote control to highlight the corner of any box on the
screen that is misaligned and press Enterto adjust the color convergence. Repeat this step as
necessary.
Parent topic: Using Advanced Image Adjustment Features
Adjusting the Color Tone (Color Uniformity) You can use the Color Uniformity feature to manually adjust the color tone balance in the projected
image.
1. Press theMenubutton. 
						

							163
2. Select the
Extendedmenu and press Enter.
3. Select the Displaysetting and press Enter.
4. Select the Color Uniformity setting and pressEnter.
5. Press Enterand select On.
6. Press Esc.
7. Select the Adjustment Level setting and pressEnter.
8. Press the right and left arrow buttons to adjust the level, then press Esc.
9. Select the Start Adjustments setting and pressEnter. 
						

							164
10. Select the area of the screen that you want to adjust and press
Enter.
11. Select the color ( Red,Green, or Blue) you want to adjust, and use the left arrow button to weaken
the color tone and the right arrow button to strengthen the color tone.
12. Press Esc.
13. Repeat steps 10 and 11 for each area you want to adjust.
14. When you are finished, press the Menubutton.
Parent topic: Using Advanced Image Adjustment Features
Using Multiple Projectors You can combine the projected images from two or more projectors to create one large image. Follow
the instructions in these sections to setup and project from multiple projectors.
Multiple Projector Adjustment Overview
Projector Identification System for Multiple Projector Control
Tiling Images into One Image
Blending the Image Edges
Adjusting the Black Level
Matching Tint and Brightness (Screen Matching)
Scaling an Image
Parent topic:Adjusting Projector Features
Multiple Projector Adjustment Overview If you are combining images from multiple projectors on a network, you can assign one projector as the
master and automatically adjust all the images to match the master image. If the projectors are not
connected to a network, you can match each projectors images manually.
Note:Make sure all networked projectors are connected using LAN cables and have been assigned an
IP address. Also disable Sleep Mode on each projector so they do not turn off during adjustment.
1. Turn on all the projectors.
2. To select a master projector for automatic adjustment, select Customfor theLight Source Mode
setting and set the Brightness Levelsetting to the maximum value for all projectors. The projector
with the darkest projected image is the master projector. 
						

							165
3. Do one of the following:
• For automatic adjustment, set an ID for the master projector and the remote control.
• For manual adjustment, set an ID for each projector and the remote control.
4. Adjust each projectors physical position and angle to the screen.
5. Do one of the following: • For automatic adjustment, configure tiling automatically.
• For manual adjustment, configure tiling manually.
6. Adjust the image aspect ratio for each projector.
7. Adjust the position of the image for each projector using lens shift.
8. Adjust the zoom and focus for each projector.
9. Adjust small differences in the images using the Point Correctionsetting.
10. Adjust the edges of the images using the Edge BlendingandBlack Level settings.
11. Adjust the brightness and tint of the images using the Screen Matchingsetting.
12. Select sections of the images using the Scalesetting.
Parent topic: Using Multiple Projectors
Related concepts
Wired Network Projection
Projector Identification System for Multiple Projector Control
Projector Placement
Image Aspect Ratio
Related references
Projector Feature Settings - Settings Menu
Related tasks
Turning On the Projector
Adjusting the Image Position Using Lens Shift
Adjusting the Image Position Using Screen Position
Resizing the Image with the Zoom Button
Focusing the Image Using the Focus Button
Correcting Image Shape with Point Correction
Blending the Image Edges 
						

							166
Adjusting the Black Level
Scaling an Image
Related topics
Tiling Images into One Image
Matching Tint and Brightness (Screen Matching)
Projector Identification System for Multiple Projector Control You can operate multiple projectors using one remote control for more elaborate presentations. To do
this, you assign an identification number to each projector and to the remote control. Then you can
operate all the projectors at once or individually.
You can also match the colors displayed by any projectors you plan to use near each other.
Caution:Leave at least 20 inches (50 cm) of space between the projectors to prevent them from
overheating.
Setting the Projector ID
Setting the Remote Control ID
Parent topic: Using Multiple Projectors
Setting the Projector ID If you want to control multiple projectors from a remote control, give each projector a unique ID.
1. Press theMenubutton.
2. Select the Extendedmenu and press Enter.
3. Select the Multi-Projection setting and pressEnter.
4. Select Projector ID and pressEnter.
5. Press the left or right arrow buttons on the remote control to select the identification number you want to use for the projector. Then select Setand press Enter. 
						

							167
Repeat these steps for all the other projectors you want to operate from one remote control.
Note:
If you dont know the projectors ID, hold down the IDbutton and press the Homebutton to
temporarily display the projectors ID on the screen.
Parent topic: Projector Identification System for Multiple Projector Control
Setting the Remote Control ID The remote controls ID is set to 0by default so it can operate any compatible projector. If you want to set
the remote control to operate only a particular projector, you need to set the remote controls ID to match
the projectors ID.
1. Turn on the projector you want the remote control to operate with exclusively.
2. Set the remote control IDswitch to On.
3. Hold down the IDbutton on the remote control while you press the numeric button that matches the
projectors ID. Then release the buttons.   
						

							168
Note:
If you dont know the projectors ID, hold down the IDbutton and press the Homebutton to
temporarily display the projectors ID on the screen. If the batteries are left out of the remote control
for an extended period, the remote control ID returns to its default setting.
Parent topic: Projector Identification System for Multiple Projector Control
Tiling Images into One Image You can project the same image from up to nine projectors to create one large image using the Tiling
feature.
Note:Before tiling, make sure the displayed images from your projectors are rectangular, correctly
sized, and focused.
Configuring Tiling Automatically
Configuring Tiling Manually
Parent topic: Using Multiple Projectors
Related tasks
Multiple Projector Adjustment Overview
Configuring Tiling Automatically If your projectors are on a network and you have identified a master projector, you can configure tiling
automatically.
1. Turn on the projector.
Note: Make sure nothing is blocking the built-in camera on the front of the projector.  
						

							169
2. Press the
Menubutton.
3. Select the Extendedmenu and press Enter.
4. Select Multi-Projection and pressEnter.
You see this screen:
5. Select Projector Grouping and pressEnter.
You see a screen like this: 
						

							170
6. Press the up or down arrow buttons to highlight a projector and press
Enterto place a checkmark
next to each projector you want to use for tiling. Then select Setand press Enter.
7. Select Tilingand press Enter.
8. Select Tilingagain and press Enter.
9. Select Autoand press Esc.
10. Select Location Setup and pressEnter.
The projected images are positioned automatically.
11. When you see the message to assign projector IDs, select Yes.
When setup is complete, you see a screen like this:
Note: If any of the images are not positioned correctly, select Manualin step 9 to locate the image
manually.