Epson Projector L1505U User Manual

281
Pro L1500U/L1505U Side
Parent topic: Important Safety Instructions
Laser Light Source Warning Refer to the table here for the Exposure Hazard Values (EHV) in accordance with the IEC62471-2:2009
standard. The EHV indicates the hazard level for objects in front of the light source for 0.25 seconds at a
distance of 7.9 inches (20 cm). The higher the value, the greater the hazard level.
Lens Exposure Hazard Value
Pro L1100U Pro L1200U Pro L1300U Pro L1405UPro L1500U
Pro L1505U
ELPLM08 0.50.5 0.50.5  

282
Lens
Exposure Hazard Value
Pro L1100U Pro L1200U Pro L1300U Pro L1405UPro L1500U
Pro L1505U
ELPLM09
ELPLS04 0.6
0.6 0.60.6
ELPLX01 

283
List of Safety Symbols (corresponding to IEC60950-1 A2)
The following table lists the meaning of the safety symbols labeled on the equipment.
No. Symbol Approved Standards Description
1 IEC60417
No.5007ON (power)
To indicate connection to the mains.
2 IEC60417
No.5008OFF (power)
To indicate disconnection from the
mains.
3 IEC60417
No.5009Stand-by
To identify the switch or switch position
by means of which part of the equipment
is switched on in order to bring it into the
stand-by condition.
4...

284
No. Symbol
Approved Standards Description
8 IEC60417
No.5926Polarity of DC power connector
To identify the positive and negative
connections (the polarity) on a piece of
equipment to which a DC power supply
may be connected.
9 IEC60417
No.5001BBattery, general
On battery powered equipment. To
identify a device for instance a cover for
the battery compartment, or the
connector terminals.
10 IEC60417
No.5002Positioning of cell
To identify the battery holder itself and to
identify the positioning of the...

285
No. Symbol
Approved Standards Description
14 IEC60417
No.5031Direct current
To indicate on the rating plate that the
equipment is suitable for direct current
only; to identify relevant terminals.
15 IEC60417
No.5172Class II equipment
To identify equipment meeting the safety
requirements specified for Class II
equipment according to IEC 61140.
16 ISO 3864General prohibition
To identify actions or operations that are
prohibited.
17 ISO 3864Contact prohibition
To indicate injury that could occur due to...

286
No. Symbol
Approved Standards Description
22 —Never look into the lens while the LED for
lighting is on.
23 IEC60417
No. 5266Standby, partial standby
To indicate that part of the equipment is
in the ready status.
24 ISO3864
IEC60417
No. 5057Caution, movable parts
To indicate that you must keep away
from movable parts according to
protection standards.
Parent topic: Notices
FCC Compliance Statement For United States Users
This equipment has been tested and found to comply with the limits for a Class B...

287
not leave cables connected to unused interfaces. Changes or modifications not expressly approved by
the manufacturer could void the user’s authority to operate the equipment.
For Canadian Users
CAN ICES-3(B)/NMB-3(B)
Parent topic:
Notices
Open Source Software License GNU GPL
This projector product includes the open source software programs which apply the GNU General Public
License Version 2 or later version (GPL Programs).
We provide the source code of the GPL Programs until five (5) years after the...

288
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document,
but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By
contrast, the GNU General Public License is intended to guarantee your freedom to share and change
free software—to...

289
GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND
MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright
holder saying it may be distributed under the terms of this General Public License. The Program,
below, refers to any such program or work, and a work based on the Program means either the
Program or any derivative work under copyright law: that is to say, a work containing the Program or a
portion of it, either...

290
separate works. But when you distribute the same sections as part of a whole which is a work based on
the Program, the distribution of the whole must be on the terms of this License, whose permissions for
other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by
you; rather, the intent is to exercise the right to control the distribution of...