Epson Projector L1505U User Manual

241
Related references
Projector Setup Settings - Extended Menu
Optional Equipment and Replacement Parts
Related tasks
Stopping Video Action Temporarily
Viewing the Status Display You can monitor the projectors status and view error information from the status display.
1. Turn on the projector.
2. Press theibutton on the remote control or the right arrow button on the control panel.
3. Select Status Information and pressEnter.  

242
4. Press the left or right arrow buttons to view different categories of information.
•Status Information: The projectors operating status
• Source: Input signal information
• Signal Information: Input digital signal information
• Network Wired: Wired LAN settings
• Network Wireless: Wireless LAN settings
• Maintenance: Operating time for the projector and light source
Projector Status Display Messages
Parent topic: Solving Problems
Projector Status Display Messages Categories on the status display...

243
Information
Description
On-Screen Display Displays the settings for on-screen displays .
When turned off, menus or messages are not
displayed on the projected images
A/V Mute Displays the A/V Mute status
Air Temp Display the environmental temperature
Temp Level
Laser Status Display the operating status of the light source
Source category
Information Description
Source Displays the source currently being used
Resolution Displays the resolution of the current input signal
Video Signal Displays the...

244
Information
Description
TMDS Clock Displays the TMDS frequency of the current input
signal
TMDS H-Frequency Displays the horizontal frequency of the current
input signal
TMDS V-Frequency Displays the vertical frequency of the current input
signal
DetChg 5CFHMP123 Displays the factors of signal changes
Stable Time Displays the amount of operating time since the
input source was determined
HDCP Status Displays the HDCP status
HDCP Ver Displays the HDCP version
AVI Info VIC Displays the VIC information...

245
Network Wireless
category
Information Description
Projector Name Displays the name used to identify the projector
when connected to a network
Connection Mode Displays the connection mode to use when
connecting the projector and a computer over a
wireless LAN
SSID Display Displays the SSID display settings
IP Display Displays the IP address display settings
SSID Displays the SSID
IP Address Displays the IP address
DHCP Displays the DHCP settings
MAC Address Displays the MAC address
Security Displays...

246
Information
Description
Main Display the projectors firmware version
information
Video2
Sub
Sub2
HDBaseT
System status information
Status Description
OK The projector is in normal operating mode
Warm-up The projector is warming up
Standby The projector is in standby mode
Cool Down The projector is cooling down
Temp Error A high temperature error occurred
Fan Error A fan error occurred
Sensor Error A sensor error occurred
Power Error A power error occurred
Internal Error An internal error occurred...

247
Parent topic:
Viewing the Status Display
Using the Projector Help Displays You can display information to help you solve common problems using the projectors Help system.
1. Turn on the projector.
2. Press theHomebutton on the remote control.
3. Use the arrow buttons to select Help.
4. Press Enter.
You see the Help menu.
5. Use the up and down arrow buttons to highlight the problem you want to solve.
6. Press Enterto view the solutions.
7. When you are finished, do one of the following: • To select...

248
Solutions When No Image Appears
If no image appears, try the following solutions:
• Make sure the lens cap is off.
• Press theA/V Mutebutton on the remote control to see if the image was temporarily turned off.
• Make sure all necessary cables are securely connected and the power is on for the projector and connected video sources.
• Press the projectors power button to wake it from standby or sleep mode. Also see if your connected computer is in sleep mode or displaying a blank screen saver.
• Press...

249
Solutions When No Signal Message Appears
If the No Signal message appears, try the following solutions:
• Press theSource Search orSearch button and wait a few seconds for an image to appear.
• Turn on the connected computer or video source, and press its play button to begin your presentation, if necessary.
• Check the connection from the projector to your video sources.
• If you are projecting from a laptop computer, make sure it is set up to display on an external monitor.
• If necessary, turn the...

250
2. Click the
Arrangement tab.
3. Select the Mirror Displays checkbox.
Parent topic: Solutions When No Signal Message Appears
Solutions When Not Supported Message Appears If the Not Supported message appears, try the following solutions:
• Make sure the correct input signal is selected on the Signal menu.
• Make sure the computers display resolution does not exceed the projectors resolution and frequencylimit. If necessary, select a different display resolution for your computer. (See your computer...