Epson Projector L1505U User Manual

181
Related references
Image Quality Settings - Image Menu
Projector Parts - Front/Top
Related tasks
Multiple Projector Adjustment Overview
Configuring Tiling Automatically
Matching the Screens Manually You can manually correct the brightness and tint for multiple projectors.
1. Press theMenubutton.
2. Select the Extendedmenu and press Enter.
3. Select the Multi-Projection setting and pressEnter.
4. Select the Screen Matching setting and pressEnter.
You see this screen:
5. Select the Color Matching...

182
You see this screen:
6. Press the left or right arrow buttons to select a value for the Adjustment Levelsetting.
Note: There are eight adjustment levels ranging from white to black and you can adjust each level
individually.
7. Press the left or right arrow buttons to adjust the color tone for the Red,Green, and Bluesettings.
8. Press the left or right arrow buttons to adjust the Brightnesssetting.
9. Repeat the previous three steps as necessary to adjust each adjustment level.
Parent topic: Matching...

183
1. Press the
Menubutton.
2. Select the Extendedmenu and press Enter.
3. Select the Multi-Projection setting and pressEnter.
4. Select the Scalesetting and press Enter.
You see this screen:
5. Select one of the following as the Scalesetting:
• Auto to automatically adjust the clipped areas according to the Edge BlendingandTiling
settings you selected
• Manual to adjust the clipped areas manually
6. Select the Scale Modesetting and select one of these options:
• Zoom Display to maintain the image...

184
•
Full Display to adjust the image to the projectors screen size as you scale the image
7. If you selected Autoas the Scale setting, you can skip the remaining steps. If you selected Manual,
adjust each of the following options as necessary:
• –or +to scale the image horizontally and vertically at the same time
• Scale Vertically to scale the image vertically only
• Scale Horizontally to scale the image horizontally only
8. Select the Clip Adjustment setting and use the arrow buttons to adjust the...

185
You see the Protocol Emulation screen.
4. Select one of the following and press Enter:
• Type P for Panasonic projectors
• Type M for Mitsubishi projectors
• Type N for NEC projectors
• Type S for Sony projectors
5. Turn the projector off and on again to enable the control code you selected.
Parent topic: Adjusting Projector Features
Viewing 3D Images You can use two projectors to project and view passive 3D images.
The following optional items are required:
• Polarizer
• Passive 3D glasses
• A mount...

186
3. Select the
Settingsmenu and press Enter.
4. Select the Memorysetting and press Enter.
Note: You can also access this screen by pressing the Memorybutton on the remote control.
5. Select one of the following options: •Memory: Saves or loads various settings; you can save up to 10 different memories 

187
Note:
The following settings are saved: all settings from the Image menu, the Scalesetting from
the Signal menu, and the Edge Blending,Black Level, and Color Matchingsettings from the
Extended menu.
• Lens Position: Saves or loads settings related to the lens such as the lens shift, focus, zoom, and
distortion adjustment settings; you can save up to 10 different memories
• Geometry Correction: Saves or loads any adjustments made in the Geometry Correction
setting in the Settings menu; you can save up...

188
Note:
To reset all saved memories of all types, select Reset All Memoriesin the Reset menu.
7. Press MenuorEsc to exit.
Parent topic: Adjusting Projector Features
Saving a Scheduled Event You can select projector commands you want to perform and schedule them as an event.
1. Press theMenubutton.
2. Select the Extendedmenu and press Enter.
3. Select the Schedule Settings setting and pressEnter.
The Schedule Settings screen appears.
4. Select the Schedulemenu and press Enter.
5. Select Add Newand press...

189
1. Press the
Menubutton.
2. Select the Extendedmenu and press Enter.
3. Select the Schedule Settings setting and pressEnter.
You see a screen like this:
The colored boxes in the calendar indicate the following about the scheduled events:
One-time event
Reoccurring event
Communication is on/off
Event is invalid
Parent topic: Saving a Scheduled Event
Editing a Scheduled Event You can edit any currently scheduled event.
1. Press theMenubutton.
2. Select the Extendedmenu and press Enter.
3. Select the...

190
You see a screen like this:
4. Press the left or right arrow buttons to highlight the date on the calendar containing the scheduled event you want to edit.
5. Press the up or down arrow buttons to highlight the event you want to edit, and press Esc.
6. Select one of the following: •On/Disabled: Enable or disable the selected event.
• Edit: Edit the settings for the selected event.
• Clear: Delete the selected event.
• Add New: Add a new scheduled event.
7. When you are finished, select Returnand...