Home > Epson > Projector > Epson Projector L1500U User Manual

Epson Projector L1500U User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Epson Projector L1500U User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							211
    Setting
    OptionsDescription
    Test Pattern —Displays a test pattern to assist in
    adjusting the image; press the
    left or right arrow buttons on the
    remote control orEnteron the
    control panel to cycle through the
    available test patterns, or Escto
    cancel pattern display
    Memory Load Memory
    Save Memory
    Erase Memory
    Rename MemorySave customized sets of settings
    to memory
    1 Available only when the Light Source Modesetting is set toCustom.
    2 Available only when the Light Source Modesetting is set toCustomand theConstant Bright setting
    is set to On.
    Parent topic: Adjusting the Menu Settings
    Projector Setup Settings - Extended Menu Settings on the Extended menu let you customize various projector setup features that control its
    operation. 
    						
    							212
    Setting
    OptionsDescription
    Home Screen —Adjust settings on the Home
    Screen
    Display —See theDisplay settings table in
    this topic
    Users Logo —Creates a screen that the
    projector displays to identify itself
    and enhance security
    Projection Front
    Front/Ceiling
    Rear
    Rear CeilingSelects the way the projector
    faces the screen so the image is
    oriented correctly
    Operation —See theOperation settings table
    in this topic
    A/V Settings A/V Output
    Monitor Out
    Audio SettingsSelects various audio and video
    output settings
    A/V Output: select to output
    audio and video to an external
    device when the projector is in
    standby mode (Standby Mode
    must be turned on to use this
    setting)
    Monitor Out: select the image
    source to output to an external
    device when the projector is in
    standby mode; when set to
    Auto,
    selects output from the
    Computer orBNC port
    depending on which was used
    when the projector went into
    standby mode
    Audio Settings: selects audio
    source to output 
    						
    							213
    Setting
    OptionsDescription
    Standby Mode Communication On
    Communication OffEnable this setting to allow the
    following operations to occur
    when the projector is in standby
    mode:
    • Monitor and control the
    projector over a network
    • Output audio and video to an external device (A/V Output
    must be set to Always On)
    • Communication from the HDBaseT port (Control
    Communications must be set
    to On)
    HDBaseT Control Communications
    Extron XTPSelects the communication
    settings for connections to an
    HDBaseT transmitter or switcher
    Control Communications:
    enables or disables
    communication from the Ethernet
    and serial ports on the
    transmitter; turning on this setting
    disables the projectors
    LAN,RS-
    232C, and Remoteports (Extron
    XTP must be turned off to use
    this setting)
    Extron XTP: set to Onwhen you
    connect an Extron XTP
    transmitter or switcher to the
    HDBaseT ports 
    						
    							214
    Setting
    OptionsDescription
    Color Calibration Start Auto Adjustment
    Undo
    Redo
    Color UniformityAutomatically detects color
    deterioration and adjusts the
    color tone
    Start Auto Adjustment:
    automatically adjusts the color
    tone for the whole image
    Undo
    andRedo: undoes or
    redoes the auto adjustment
    Color Uniformity: adjusts the
    color tone balance for the whole
    image 
    						
    							215
    Setting
    OptionsDescription
    Multi-Projection Projector ID
    Projector Grouping
    Tiling
    Geometry Correction
    Edge Blending
    Black Level
    Scale
    Screen MatchingSelect various options when
    projecting from multiple
    projectors
    Projector ID: sets the projector
    to a particular ID number which
    allows you to use a remote
    control to individually control
    projectors
    Projector Grouping: lets you
    select the projectors being used
    to project one image
    Tiling: sets the number of split
    screens and the position of each
    image
    Geometry Correction: corrects
    image distortion
    Edge Blending: blends the
    border between multiple images
    to create a seamless screen
    Black Level: adjusts the
    brightness and tone differences
    in overlapping images
    Scale: adjusts the scale of the
    images
    Screen Matching: adjusts the
    tint and brightness of the images
    Schedule Settings Various scheduling options Lets you schedule various
    projector tasks
    Language Various languages available Selects the language for
    projector menu and message
    displays (not changed byReset
    option)
    Display settings 
    						
    							216
    Setting
    Description
    Menu Position Selects the position of the projector menu displayed on the
    screen
    Message Position Selects the position of messages displayed on the screen
    Messages Controls whether messages are displayed on the screen
    Display Background Selects the screen color or logo to display when no signal is
    received
    Startup Screen Controls whether a special screen appears when the projector
    starts up
    Standby Confirmation Displays a confirmation message after pressing the Standby
    button on the remote control
    Air Filter Notice Displays a message when a clog in the air filter is detected
    Screen Sets the aspect ratio and position of the projected image
    according to the type of screen being used
    Panel Alignment Corrects color misalignment in the projected image
    Color Uniformity Adjusts the color tone balance
    OSD Rotation Rotates the menu display 90°
    Operation settings
    Setting Description
    Direct Power On Turns on the projector when you plug it in
    Sleep Mode Automatically places the projector in standby mode after an
    interval of inactivity
    Sleep Mode Timer Sets the time before the projector automatically turns off (Sleep
    Mode must be turned on)
    High Altitude Mode Regulates the projector’s operating temperature at altitudes
    above 4921 feet (1500 m)
    Auto Source Search Automatically select an input source
    Auto Power On IfComputer orBNC is selected, the projector turns on when an
    input signal is detected from those ports 
    						
    							217
    Setting
    Description
    A/V Mute Settings Adjusts the A/V Mute settings
    Fade-in: sets the number of seconds for a fade-in transition
    effect when displaying an image
    Fade-out: sets the number of seconds for a fade-out transition
    effect when hiding an image
    A/V Mute Timer: turns off the projector automatically if A/V
    Mute is enabled and 2 hours of inactivity has passed
    A/V Mute Release: selectA/V Muteif you want to use only the
    A/V Mute button to turn off A/V mute, or select Any Buttonto
    use any button to turn it off
    Advanced See the next table in this topic
    Date & Time Adjusts the projectors time and date settings
    Lens Calibration Displays information about the lens currently in use
    Advanced settings
    Setting Description
    BNC Sync Termination Sets the termination for the signal from the BNC port (set to off
    unless you need analog termination, such as for switchers)
    Remote Control Type SelectNormal to use the remote control that came with the
    projector, or Simpleto use a different Epson projector remote
    control and disable the remote control that came with the
    projector
    Beep Controls the beep that sounds when you turn the projector on
    or off
    Indicators SelectOffto turn off projector lights, except warning lights
    Instant Off SelectEnabled to place the projector in standby mode after
    turning it off, or Disabledto place the projector in standby
    mode approximately 75 seconds after turning it off
    Inv Direction Button Enable this setting if you installed the projector on a ceiling and
    want to invert the direction of the arrow buttons on the control
    panel 
    						
    							218
    Setting
    Description
    HDMI DDC Buffer If you are projecting using an HDMI extension cable and the
    image is not displayed correctly, enabling this setting may
    improve image quality
    DVI-D DDC Buffer If you are projecting using a DVI extension cable and the image
    is not displayed correctly, enabling this setting may improve
    image quality
    Lens Type Select the model number for the attached lens when using the
    following lenses: ELPLS04, ELPLU02, ELPLR04, ELPLW04,
    ELPLM06, ELPLM07, ELPLL07
    Parent topic: Adjusting the Menu Settings
    Projector Network Settings - Network Menu Settings on the Network menu let you view network information and set up the projector for monitoring
    and control over a network.
    Setting OptionsDescription
    Wireless Mode Wireless LAN On
    OffEnable or disable wireless
    communication 
    						
    							219
    Setting
    OptionsDescription
    Net. Info - Wireless LAN Connection mode
    Wireless LAN Sys.
    Antenna level
    Projector Name
    SSID
    DHCP
    IP Address
    Subnet Mask
    Gateway Address
    MAC Address
    Region CodeDisplays wireless network status
    and details
    Net. Info - Wired LAN Projector Name
    DHCP
    IP Address
    Subnet Mask
    Gateway Address
    MAC AddressDisplays wired network status
    and details
    Display the QR Code —Displays the QR Code
    Network Configuration Accesses additional network
    menusConfigures your network settings
    Parent topic: Adjusting the Menu Settings 
    						
    							220
    Projector Information Display - Info Menu
    You can display information about the projector and input sources by viewing the Info menu. However,
    you cannot change any settings in the menu.
    Note:The total operating timer does not register any hours until you have used the projector for at least
    10 hours. Available settings depend on the current input source. 
    						
    All Epson manuals Comments (0)

    Related Manuals for Epson Projector L1500U User Manual