Epson Projector L1200U User Manual

211
Setting
OptionsDescription
Test Pattern —Displays a test pattern to assist in
adjusting the image; press the
left or right arrow buttons on the
remote control orEnteron the
control panel to cycle through the
available test patterns, or Escto
cancel pattern display
Memory Load Memory
Save Memory
Erase Memory
Rename MemorySave customized sets of settings
to memory
1 Available only when the Light Source Modesetting is set toCustom.
2 Available only when the Light Source Modesetting is set toCustomand...

212
Setting
OptionsDescription
Home Screen —Adjust settings on the Home
Screen
Display —See theDisplay settings table in
this topic
Users Logo —Creates a screen that the
projector displays to identify itself
and enhance security
Projection Front
Front/Ceiling
Rear
Rear CeilingSelects the way the projector
faces the screen so the image is
oriented correctly
Operation —See theOperation settings table
in this topic
A/V Settings A/V Output
Monitor Out
Audio SettingsSelects various audio and video
output...

213
Setting
OptionsDescription
Standby Mode Communication On
Communication OffEnable this setting to allow the
following operations to occur
when the projector is in standby
mode:
• Monitor and control the
projector over a network
• Output audio and video to an external device (A/V Output
must be set to Always On)
• Communication from the HDBaseT port (Control
Communications must be set
to On)
HDBaseT Control Communications
Extron XTPSelects the communication
settings for connections to an
HDBaseT...

214
Setting
OptionsDescription
Color Calibration Start Auto Adjustment
Undo
Redo
Color UniformityAutomatically detects color
deterioration and adjusts the
color tone
Start Auto Adjustment:
automatically adjusts the color
tone for the whole image
Undo
andRedo: undoes or
redoes the auto adjustment
Color Uniformity: adjusts the
color tone balance for the whole
image 

215
Setting
OptionsDescription
Multi-Projection Projector ID
Projector Grouping
Tiling
Geometry Correction
Edge Blending
Black Level
Scale
Screen MatchingSelect various options when
projecting from multiple
projectors
Projector ID: sets the projector
to a particular ID number which
allows you to use a remote
control to individually control
projectors
Projector Grouping: lets you
select the projectors being used
to project one image
Tiling: sets the number of split
screens and the position of each
image...

216
Setting
Description
Menu Position Selects the position of the projector menu displayed on the
screen
Message Position Selects the position of messages displayed on the screen
Messages Controls whether messages are displayed on the screen
Display Background Selects the screen color or logo to display when no signal is
received
Startup Screen Controls whether a special screen appears when the projector
starts up
Standby Confirmation Displays a confirmation message after pressing the Standby
button on...

217
Setting
Description
A/V Mute Settings Adjusts the A/V Mute settings
Fade-in: sets the number of seconds for a fade-in transition
effect when displaying an image
Fade-out: sets the number of seconds for a fade-out transition
effect when hiding an image
A/V Mute Timer: turns off the projector automatically if A/V
Mute is enabled and 2 hours of inactivity has passed
A/V Mute Release: selectA/V Muteif you want to use only the
A/V Mute button to turn off A/V mute, or select Any Buttonto
use any button to...

218
Setting
Description
HDMI DDC Buffer If you are projecting using an HDMI extension cable and the
image is not displayed correctly, enabling this setting may
improve image quality
DVI-D DDC Buffer If you are projecting using a DVI extension cable and the image
is not displayed correctly, enabling this setting may improve
image quality
Lens Type Select the model number for the attached lens when using the
following lenses: ELPLS04, ELPLU02, ELPLR04, ELPLW04,
ELPLM06, ELPLM07, ELPLL07
Parent topic:...

219
Setting
OptionsDescription
Net. Info - Wireless LAN Connection mode
Wireless LAN Sys.
Antenna level
Projector Name
SSID
DHCP
IP Address
Subnet Mask
Gateway Address
MAC Address
Region CodeDisplays wireless network status
and details
Net. Info - Wired LAN Projector Name
DHCP
IP Address
Subnet Mask
Gateway Address
MAC AddressDisplays wired network status
and details
Display the QR Code —Displays the QR Code
Network Configuration Accesses additional network
menusConfigures your network settings
Parent...

220
Projector Information Display - Info Menu
You can display information about the projector and input sources by viewing the Info menu. However,
you cannot change any settings in the menu.
Note:The total operating timer does not register any hours until you have used the projector for at least
10 hours. Available settings depend on the current input source.