Epson Projector L1200U User Manual

191
Caution:
If the copy process fails due to a power failure, communication error, or for any other reason,
Epson will not be responsible for any repair costs incurred.
The following settings will not transfer between projectors:
• Info menu items
• Network menu settings other than those in the Mail and Others menus
• Network menu settings other than those in the Notifications and Others menus
Note: In addition to the methods covered this section, you can also copy and transfer settings to multiple...

192
2. Insert the flash drive into the wireless LAN module port.
Note: Connect the flash drive directly to the projector. Do not use a hub or your settings may not be
saved correctly.
3. Press and hold the Escbutton on the control panel or remote control as you connect the power cord
to the projectors power inlet.
4. When the On/Standby and Status lights are blue, and the Laser and Temp lights are orange, release theEsc button.
The lights flash to indicate that settings are transferring to the flash...

193
5. Once the projector enters standby mode, remove the flash drive.
Parent topic:
Copying Menu Settings Between Projectors
Transferring Settings From a USB Flash Drive After saving projector settings to a USB flash drive, you can transfer them to another projector of the
same model.
Note:Make sure the USB flash drive contains only a single settings transfer from another projector of
the same model. The settings are contained in a file called pjconfdata.bin. If the drive contains other
files, the...

194
3. Press and hold the
Menubutton on the control panel or remote control as you connect the power
cord to the projectors power inlet.
4. When the On/Standby and Status lights are blue, and the Laser and Temp lights are orange, release theMenu button.
The lights flash to indicate that settings are transferring to the projector. When the lights stop
flashing, the On/Standby light turns blue and the projector enters standby mode.
Caution: Do not unplug the power cord or remove the flash drive while the...

195
• OS X 10.9.x
• OS X 10.10.x
• OS X 10.11.x
1. Turn off the projector and unplug the power cord from the projectors power inlet.
2. Connect a USB cable to your projectors
Serviceport.
3. Connect the other end to any available USB port on your computer.
4. Press and hold the Escbutton on the control panel or remote control as you connect the power cord
to the projectors power inlet.
5. When the On/Standby and Status lights are blue, and the Laser and Temp lights are orange, release theEsc button.
The...

196
7. Once the file has copied, do one of the following:
•Windows: Open theMy Computer, Computer, orWindows Explorer utility. Right-click the
name of your projector (listed as a removable disk) and select Eject.
• OS X: Drag the removable disk icon for your projector from the desktop into the trash.
The projector enters standby mode.
Parent topic: Copying Menu Settings Between Projectors
Transferring Settings From a Computer After saving projector settings to a computer, you can transfer them to another...

197
2. Connect a USB cable to your projectors port.
3. Connect the other end to any available USB port on your computer.
4. Press and hold the
Menubutton on the control panel or remote control as you connect the power
cord to the projectors power inlet.
5. When the On/Standby and Status lights are blue, and the Laser and Temp lights are orange, release theMenu button.
The projector shows up as a removable disk on your computer.
6. Copy the pjconfdata.bin file from your computer to the removable disk....

198
All the lights start flashing to indicate that the projectors settings are being updated. When the lights
stop flashing, the On/Standby light turns blue and the projector enters standby mode.
Caution:
Do not unplug the power cord while the lights are flashing. This could damage the
projector.
Parent topic: Copying Menu Settings Between Projectors 

199
Adjusting the Menu Settings
Follow the instructions in these sections to access the projector menu system and change projector
settings.
Using the Projectors Menus
Image Quality Settings - Image Menu
Input Signal Settings - Signal Menu
Projector Feature Settings - Settings Menu
Projector Setup Settings - Extended Menu
Projector Network Settings - Network Menu
Projector Information Display - Info Menu
Projector Reset Options - Reset Menu
Using the Projectors Menus You can use the projectors menus to...

200
You see the menu screen displaying the Image menu settings.
2. Press the up or down arrow button to move through the menus listed on the left. The settings for each menu are displayed on the right.
Note: The available settings depend on the current input source.
3. To change settings in the displayed menu, press Enter.
4. Press the up or down arrow button to move through the settings.
5. Change the settings using the buttons listed on the bottom of the menu screens.
6. To return all the menu settings...