Epson Projector EX7230 Pro User Manual
Have a look at the manual Epson Projector EX7230 Pro User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
6. Grasp theraised section ofthe lamp andgently pullthelamp outofthe projector. Note: Thelamp(s) inthis product containmercury. Pleaseconsult yourstate andlocal regulations regardingdisposalorrecycling. Donot putinthe trash. 7. Gently insertthenew lamp intotheprojector. Ifitdoes notfiteasily, makesureitis facing theright way. Caution: Donot touch anyglass onthe lamp assembly toavoid premature lampfailure. 141
8. Push inthe lamp firmly andtighten thescrews tosecure it. Caution: Donot over-tighten thescrews. 9. Replace thelamp cover andtighten thescrew tosecure it. 142
Note: Besure thelamp cover issecurely installedorthe lamp willnot come on. Reset thelamp timer tozero tokeep trackofthe new lamp ’s usage. Parent topic:Projector LampMaintenance Related tasks Resetting theLamp Timer Resetting theLamp Timer You must reset thelamp timer afterreplacing theprojectors lamptoclear thelamp replacement message andtokeep trackoflamp usage correctly. Note: Donot reset thelamp timer ifyou have notreplaced thelamp toavoid inaccurate lampusage information. 1. Turn onthe projector. 2. Press theMenu button. 3. Select theReset menuandpress Enter. 4. Select ResetLampHours andpress Enter. You seeaprompt askingifyou want toreset thelamp hours. 5. Select Yesandpress Enter. 143
6. Press Menu orEsc toexit themenus. Parent topic:Projector LampMaintenance Related tasks Replacing theLamp Replacing theRemote ControlBatteries The remote controlusestwoAAmanganese oralkaline batteries. Replacethebatteries assoon asthey run out. Caution: Useonly thetype ofbatteries specified inthis manual. Donot install batteries ofdifferent types, or mix new andoldbatteries. 1. Open thebattery coverasshown. 2. Remove theoldbatteries. Warning: Ifthe battery fluidhasleaked, wipeitaway withasoft cloth andavoid getting thefluid on your hands. Ifitgets onyour hands, washthemimmediately toavoid injury. 144
3. Insert thebatteries withthe+and –ends facing asshown. 4. Close thebattery coverandpress itdown untilitclicks intoplace. Warning: Disposeofused batteries according tolocal regulations. Donot expose batteries toheat or flame. Keepbatteries outofthe reach ofchildren; theyarechoking hazards andarevery dangerous ifswallowed. Parent topic:Projector Maintenance Related references Remote ControlOperation 145
Transporting theProjector The projector containsprecision parts,someofwhich areglass. Follow theseguidelines totransport or ship theprojector safely: • Close thelens cover toprotect thelens. • Remove anyequipment connectedtothe projector. • Use acarrying casetohand-carry theprojector. • When transporting theprojector along distance oras checked luggage, placeitin acarrying case. Then packthecase inafirm boxwith cushioning arounditand mark thebox Fragile. • When shipping theprojector forrepairs, placeitin its original packing materials, ifpossible, oruse equivalent materialswithcushioning aroundtheprojector. Markthebox Fragile. Note: Epson shallnotbeliable forany damages incurredduringtransportation. Parent topic:Maintaining andTransporting theProjector 146
Solving Problems Check thesolutions inthese sections ifyou have anyproblems usingtheprojector. Projection ProblemTips Projector LightStatus Using theProjector HelpDisplays Solving ImageorSound Problems Solving Projector orRemote ControlOperation Problems Solving Network Problems Where toGet Help Projection ProblemTips If the projector isnot working properly, tryturning itoff and unplugging it.Then plugitback inand turn it on. If this does notsolve theproblem, checkthefollowing: • The lights onthe projector mayindicate whattheproblem is. • The projectors Helpsystem candisplay information aboutcommon problems, ifthe projector is operating. • The solutions inthis manual canhelp yousolve many problems. If none ofthese solutions help,youcancontact Epsonfortechnical support. Parent topic:Solving Problems Related references Projector LightStatus Where toGet Help Related tasks Using theProjector HelpDisplays 147
Projector LightStatus The lights onthe projector indicatetheprojector statusandletyou know when aproblem occurs.Check the status andcolor ofthe lights andlook forasolution inthe table here. 1 Power light 2 Status light 3 Lamp light 4 Temp (temperature) light Power light Status light Lamp light Temp light Status andsolution Blue Blue Off Off Normal operation Blue Flashing blue Off Off Warming uporcooling down Blue Off Off Off Standby orsleep mode Flashing blue Light status Light status Flashing Projector istoo hot. varies varies orange • Make surethatthevents andair filter arenotclogged withdust or obstructed bynearby objects. • Clean orreplace theairfilter. • Make suretheenvironmental temperature isnot toohot. 148
Power light Status light Lamp light Temp light Status andsolution Off Flashing blue Off Orange Projector hasoverheated and turned off.Leave itturned offto cool down. OncetheTemp and Status lightsturnoffand thepower light turns blue(after about five minutes), trythe suggestions below: • Make surethatthevents andair filter arenotclogged withdust or obstructed bynearby objects. • Clean orreplace theairfilter. • Ifoperating theprojector athigh altitude, turnonHigh Altitude Mode . • Ifthe problem persists, unplug the projector andcontact Epson for help. Off Flashing blue Orange Off Lamp hasaproblem. • Check tosee ifthe lamp is burned out,broken, orinstalled incorrectly. Reseatorreplace the lamp asnecessary. • Clean orreplace theairfilter. • Ifoperating theprojector athigh altitude, turnonHigh Altitude Mode . • Ifthe problem persists, unplug the projector andcontact Epson for help. Flashing blue Light status Flashing Light status Replace thelamp soon toavoid varies orange varies damage. Donot continue usingthe projector. 149
Power light Status light Lamp light Temp light Status andsolution Off Flashing blue Off Flashing A fan orsensor hasaproblem. orange Turn theprojector off,unplug it,and contact Epsonforhelp. Off Flashing blue Flashing Off Internal projector error.Turnthe orange projector off,unplug it,and contact Epson forhelp. Off Flashing blue Flashing Flashing Auto iriserror. Turntheprojector orange orange off, unplug it,and contact Epsonfor help. Off Flashing blue Orange Orange Power error.Turntheprojector off, unplug it,and contact Epsonfor help. Light status Light status Flashing Flashing When transferring settingsbetween varies varies orange rapidly orange rapidly projectors, thesettings filemay be corrupt orthe USB flash drive or USB cable maynotbeproperly connected. Removetheflash drive or cable, unplug thepower cord, and tryagain. Flashing blue Flashing blue Flashing Flashing When transferring settingsbetween rapidly rapidly orange rapidly orange rapidly projectors, writingmayhave failed and aprojector errormayhave occurred. Turntheprojector off, unplug it,and contact Epsonfor help. Note: Ifthe lights display apattern notlisted inthe table above, turntheprojector off,unplug it,and contact Epsonforhelp. Parent topic:Solving Problems Related references Projector SetupSettings -Extended Menu Where toGet Help Projector Environmental Specifications 150