Epson Projector EX7230 Pro User Manual

							

Note:
Donot pass drop-prevention cablesthrough thesecurity cableattachment pointwhen mounting
 the
projector onawall orceiling.
 Parent
topic:Projector SecurityFeatures
 Related
references
 Projector
Parts-Front/Top
 Optional
Equipment andReplacement Parts
 Projector
Identification SystemforMultiple Projector Control
 You
canoperate multiple projectors usingoneremote controlformore elaborate presentations. Todo
 this,
youassign anidentification numbertoeach projector andtothe remote control. Thenyoucan
 operate
allthe projectors atonce orindividually.
 You
canalso match thecolors displayed byany projectors youplan touse near each other.
 Caution:
Leaveatleast 20inches (50cm) ofspace between theprojectors toprevent themfrom
 overheating.

Setting
theProjector ID
 Setting
theRemote ControlID
 Matching
Multiple-Projector DisplayQuality
 Parent
topic:Adjusting ProjectorFeatures
 Setting
theProjector ID
 If
you want tocontrol multiple projectors fromaremote control, giveeach projector aunique ID.
 1.
Press theMenu button.
 2.
Select theExtended menuandpress Enter.
 101 
						

							

3.
Select Projector IDand press Enter.
 4.
Use thearrow buttons onthe remote controltoselect theidentification numberyouwant touse for
 the
projector. Thenpress Enter.
 Repeat
thesestepsforallthe other projectors youwant tooperate fromoneremote control.
 Parent
topic:Projector Identification SystemforMultiple Projector Control
 Setting
theRemote ControlID
 The
remote controls IDisset tozero bydefault soitcan operate anycompatible projector.Ifyou want to
 set
the remote controltooperate onlyaparticular projector, youneed toset the remote controls IDto
 match
theprojectors ID.
 1.
Turn onthe projector youwant theremote controltooperate withexclusively.
 2.
Make sureyouknow theprojectors IDnumber asset inthe Extended menuProjector IDsetting.
 Note:
Ifyou have forgotten theprojectors ID,aim theremote atthe projector andpress theID
 button.
Theprojectors IDwill display onthe screen temporarily.
 3.
Aim theremote controlatthat projector.
 102 
						

							

4.
Hold down theIDbutton onthe remote controlwhileyoupress thenumeric buttonthatmatches the
 projectors
ID.Then release thebuttons.
 5.
Press theIDbutton onthe remote controltocheck ifthe ID-setting processworked.
 You
seeamessage displayed bythe projector.
 •
Ifthe remote controlislisted asOn ,the remote controlIDisset tooperate onlythelisted projector.
 •
Ifthe remote controlislisted asOff ,the remote controlIDisnot setproperly. Repeatthesteps
 above
toset the IDtomatch theprojector youwant tocontrol.
 Note:
Youmust setthe remote controlIDtomatch theprojector IDeach timeyouturn onthe
 projector
youhave setitto control.
 Parent
topic:Projector Identification SystemforMultiple Projector Control
 Matching
Multiple-Projector DisplayQuality
 You
canmatch thedisplay qualityofmultiple projectors thatwillproject nexttoeach other.
 1.
Turn onallthe projectors onwhich youwant tomatch thedisplay quality.
 2.
SetIDnumbers oneach projector.
 3.
Settheremote controlIDtomatch thefirst projector.
 103  
						

							

4.
Press theMenu button, selecttheImage menu,andpress Enter.
 5.
Select settings asnecessary.
 6.
Settheremote controlIDtomatch thenext projector, thenrepeat Imagemenuadjustments as
 necessary
tomatch theprojectors displays.
 Note:
Thebrightness andtintmay notmatch exactly evenafteradjustments. Ifbrightness andtint
 differences
becomemorenoticeable overtime, repeat theadjustments.
 Parent
topic:Projector Identification SystemforMultiple Projector Control
 Projecting
TwoImages Simultaneously
 You
canusethesplit screen feature tosimultaneously projecttwoimages fromdifferent imagesources
 next
toeach other. Youcancontrol thesplit screen feature usingtheremote controlorthe projector
 menus.

Note:
Whileyouusethesplit screen feature, otherprojector featuresmaynotbeavailable andsome
 settings
maybeautomatically appliedtoboth images.
 104 
						

							

1.
Press theSplit button onthe remote control.
 The
currently selectedinputsource movestothe leftside ofthe screen.
 2.
Press theMenu button.
 You
seethisscreen:
 3.
Toselect aninput source forthe other image, selecttheSource setting,pressEnter,select the
 input
source, selectExecute ,and press Enter.(You canalso change imagesources, ifnecessary.)
 4.
Toswitch theimages, selecttheSwap Screens settingandpress Enter.
 5.
Tochange theimage sizes,select theScreen Sizesetting, pressEnter,select asizing option,
 press
Enter,and press Menu toexit.
 Note:
Depending onthe video inputsignals, theimages maynotappear atthe same sizeeven ifyou
 choose
theEqual setting.
 105  
						

							

6.
Tochoose theaudio youwant tohear, select theAudio Source setting,pressEnter,select an
 audio
option, pressEnter,and press Menu toexit.
 Note:
Select Autotohear audio fromthelargest screen orthe leftscreen.
 7.
Toexit thesplit screen feature, presstheSplit orEsc button.
 Parent
topic:Adjusting ProjectorFeatures
 Copying
MenuSettings Between Projectors
 After
youselect menusettings foryour projector, youcantransfer themtoanother projector ofthe same
 model.

Note:
Anysaved Users Logosetting onthe projector willtransfer tothe other projector.
 The
following settingswillnot transfer between projectors:
 •
Info menu items
 •
Network menusettings otherthanthose inthe Mail andOthers menus
 Saving
Settings toaUSB Flash Drive
 Transferring
SettingsFromaUSB Flash Drive
 Saving
Settings ToaComputer
 Transferring
SettingsFromaComputer
 Parent
topic:Adjusting ProjectorFeatures
 Saving
Settings toaUSB Flash Drive
 You
cansave theprojector settingsyouwant totransfer toaUSB flash drive.
 Note:
Useanempty flashdrive. Ifthe drive contains otherfiles,thetransfer maynotcomplete correctly.
 1.
Turn offthe projector andunplug thepower cordfrom theprojectors powerinlet.
 106 
						

							

2.
Insert theflash drive intotheUSB-A port.
 Note:
Connect theflash drive directly tothe projector. Donot use ahub.
 3.
Press andhold theEsc button onthe control panelorremote controlasyou connect thepower cord
 to
the projectors powerinlet.
 4.
When thepower, Status, Lamp,andTemp lightsturnon,release theEsc button.
 107   
						

							

The
lights flashtoindicate thatsettings aretransferring tothe flash drive. When thelights stop
 flashing,
thepower lightturns blueandtheprojector entersstandby mode.
 Caution:
Donot unplug thepower cordorremove theflash drive while thelights areflashing. This
 could
damage theprojector.
 5.
Once theprojector entersstandby mode,remove theflash drive.
 Parent
topic:Copying MenuSettings Between Projectors
 Transferring
SettingsFromaUSB Flash Drive
 After
saving projector settingstoaUSB flash drive, youcantransfer themtoanother projector ofthe
 same
model.
 Note:
MakesuretheUSB flash drive contains onlyasingle settings transferfromanother projector of
 the
same model. Thesettings arecontained inafile called pjconfdata.bin. Ifthe drive contains other
 files,
thetransfer maynotcomplete correctly.
 Do
not adjust image settings onaprojector untilafter youtransfer settings toit.Otherwise, youmay have
 to
repeat youradjustments.
 1.
Turn offthe projector andunplug thepower cordfrom theprojectors powerinlet.
 2.
Insert theflash drive intotheUSB-A port.
 Note:
Connect theflash drive directly tothe projector. Donot use ahub.
 108  
						

							

3.
Press andhold theMenu button onthe control panelorremote controlasyou connect thepower
 cord
tothe projectors powerinlet.
 4.
When thepower, Status, Lamp,andTemp lightsturnon,release theMenu button.
 The
lights flashtoindicate thatsettings aretransferring tothe projector. Whenthelights stop
 flashing,
thepower lightturns blueandtheprojector entersstandby mode.
 Caution:
Donot unplug thepower cordorremove theflash drive while thelights areflashing. This
 could
damage theprojector.
 5.
Once theprojector entersstandby mode,remove theflash drive.
 Parent
topic:Copying MenuSettings Between Projectors
 Saving
Settings ToaComputer
 You
cansave theprojector settingsyouwant totransfer toacomputer.
 Your
computer mustberunning oneofthe following operating systems:
 •
Windows Vista
 •
Windows 7
 •
Windows 8.x
 109  
						

							

•
OS X10.5.8
 •
OS X10.6.x
 •
OS X10.7.x
 •
OS X10.8.x
 •
OS X10.9.x
 1.
Turn offthe projector andunplug thepower cordfrom theprojectors powerinlet.
 2.
Connect aUSB cable toyour projectors USB-Bport.
 3.
Connect theother endtoany available USBportonyour computer.
 110