Epson Projector EX5240 User Manual

Parent topic:
Copying Menu Settings Between Projectors
131 

Adjusting the Menu Settings
Follow the instructions in these sections to access the projector menu system and change projector
settings.
Using the Projectors Menus
Image Quality Settings - Image Menu
Input Signal Settings - Signal Menu
Projector Feature Settings - Settings Menu
Projector Setup Settings - Extended Menu
Projector Network Settings - Network Menu
Projector Setup Settings - ECO Menu
Projector Information Display - Info Menu
Projector Reset Options - Reset Menu
Using the Projectors Menus You...

1. Press the
Menubutton on the control panel or remote control.
You see the menu screen displaying the Image menu settings. 133   

2. Press the up or down arrow button to move through the menus listed on the left. The settings for
each menu are displayed on the right.
Note: The available settings depend on the current input source.
3. To change settings in the displayed menu, press Enter.
4. Press the up or down arrow button to move through the settings.
5. Change the settings using the buttons listed on the bottom of the menu screens.
6. To return all the menu settings to their default values, select Reset.
7. When you finish...

Setting
Options Description
Color Mode See the list of available Color Adjusts the vividness of image
Modes colors for various image types
and environments
Brightness Varying levels available Lightens or darkens the overall
image
Contrast Varying levels available Adjusts the difference between
light and dark areas of the image
Color Saturation Varying levels available Adjusts the intensity of the
image colors
Tint Varying levels available Adjusts the balance of green to
magenta tones in the image...

Setting
Options Description
Advanced Deinterlacing Sets whether to convert
interlaced to progressive signals
for certain video image types
Off: for fast-moving video
images
Video: for most video images
Film/Auto: for movies, computer
graphics, and animation
Auto Iris Off Adjusts the projected luminance
based on the image brightness
Normal
when theDynamic orCinema
High Speed Color Modes are selected;High
Speed sets faster luminance
correction for fast-moving
images
Note: TheBrightness setting does not...

Input Signal Settings - Signal Menu
Normally the projector detects and optimizes the input signal settings automatically. If you need to
customize the settings, you can use the Signal menu. The available settings depend on the currently
selected input source.
Note:You can restore the default settings of the Position,Tracking, and Syncsettings by pressing the
Auto button on the remote control.
To change settings for an input source, make sure the source is connected and select that source. Setting Options...

Setting
Options Description
Sync. Varying levels available Adjusts signal to eliminate
fuzziness or flickering in
computer images
Position Up, down, left, right Adjusts the image location on the
screen
Auto Setup On Automatically optimizes computer
image quality (when On)
Off
Overscan Auto Changes the projected image
ratio to make the edges visible by
Off
a selectable percentage or
4% automatically
8%
Advanced settings
Setting Options Description
HDMI Video Range Auto Sets the video range to match the...

Setting
Options Description
Input Signal Auto Specifies the signal type from
input sources connected to
RGB
computer ports
Component Auto: detects signals
automatically
RGB: corrects color for
computer/RGB video inputs
Component: corrects color for
component video inputs
Parent topic: Adjusting the Menu Settings
Related references
Available Image Aspect Ratios
Projector Feature Settings - Settings Menu Options on the Settings menu let you customize various projector features. The available settings...

Setting
OptionsDescription
Keystone H/V KeystoneAdjusts image shape to
rectangular (horizontally and
Quick Corner
vertically)
H/V Keystone: lets you manually
correct horizontal and vertical
sides, or turn automatic
correction or the horizontal
keystone slider on or off
Quick Corner: select to correct
image shape and alignment
using an on-screen display
Split Screen Screen SizeDivides the viewing area
horizontally and displays two
Source
images side-by-side (pressEsc
Swap Screens to cancel split screen...