Epson Projector EX5240 User Manual

4. Press the
Menubutton, select the Imagemenu, and press Enter.
5. Select settings as necessary.
6. Set the remote control ID to match the next projector, then select Image menu adjustments as necessary to match the projectors displays.
Note: The brightness and tint may not match exactly even after adjustments. If brightness and tint
differences become more noticeable over time, repeat the adjustments.
Parent topic: Projector Identification System for Multiple Projector Control
Projecting Two Images...

1. Press the
Splitbutton on the remote control.
The currently selected input source moves to the left side of the screen.
2. Press the Menubutton.
You see this screen:
3. To select an input source for the other image, select the Sourcesetting, press Enter, select the
input source, select Execute, and press Enter. (You can also change image sources, if necessary.)
4. To switch the images, select the Swap Screenssetting and press Enter.
5. To change the image sizes, select the Screen Sizesetting, press...

6. To choose the audio you want to hear, select the
Audio Sourcesetting, pressEnter, select an
audio option, press Enter, and pressMenuto exit.
Note: Select Autoto hear audio from the largest screen or the left screen.
7. To exit the split screen feature, press the SplitorEsc button.
Parent topic: Adjusting Projector Features
Copying Menu Settings Between Projectors After you select menu settings for your projector, you can transfer them to another projector of the same
model.
Note:Any saved Users Logo...

2. Insert the flash drive into the
USB-Aport.
Note: Connect the flash drive directly to the projector. Do not use a hub.
3. Press and hold the Escbutton on the control panel or remote control as you connect the power cord
to the projectors power inlet.
4. When the power, Status, Lamp, and Temp lights turn on, release the Escbutton.
124   

The lights flash to indicate that settings are transferring to the flash drive. When the lights stop
flashing, the power light turns blue and the projector enters standby mode.
Caution:
Do not unplug the power cord or remove the flash drive while the lights are flashing. This
could damage the projector.
5. Once the projector enters standby mode, remove the flash drive.
Parent topic: Copying Menu Settings Between Projectors
Transferring Settings From a USB Flash Drive After saving projector settings to a...

3. Press and hold the
Menubutton on the control panel or remote control as you connect the power
cord to the projectors power inlet.
4. When the power, Lamp, and Temp lights turn on, release the Menubutton.
The lights flash to indicate that settings are transferring to the projector. When the lights stop
flashing, the power light turns blue and the projector enters standby mode.
Caution: Do not unplug the power cord or remove the flash drive while the lights are flashing. This
could damage the...

• Windows 10
• OS X 10.5.8
• OS X 10.6.x
• OS X 10.7.x
• OS X 10.8.x
• OS X 10.9.x
• OS X 10.10.x
1. Turn off the projector and unplug the power cord from the projectors power inlet.
2. Connect a USB cable to your projectors
USB-Bport.
3. Connect the other end to any available USB port on your computer. 127  

4. Press and hold the
Escbutton on the control panel or remote control as you connect the power cord
to the projectors power inlet.
5. When the power, Status, Lamp, and Temp lights turn on, release the Escbutton.
The projector shows up as a removable disk on your computer.
6. Open the removable disk and copy the pjconfdata.binfile to your computer.
7. Once the file has copied, do one of the following: •Windows: Open theMy Computer, Computer, orWindows Explorer utility. Right-click the
name of your...

• Windows 7
• Windows 8.x
• Windows 10
• OS X 10.5.8
• OS X 10.6.x
• OS X 10.7.x
• OS X 10.8.x
• OS X 10.9.x
• OS X 10.10.x
Do not adjust image settings on a projector until after you transfer settings to it. Otherwise, you may have
to repeat your adjustments.
1. Turn off the projector and unplug the power cord from the projectors power inlet.
2. Connect a USB cable to your projectors
USB-Bport.
3. Connect the other end to any available USB port on your computer. 129  

4. Press and hold the
Menubutton on the control panel or remote control as you connect the power
cord to the projectors power inlet.
5. When the power, Status, Lamp, and Temp lights turn on, release the Menubutton.
The projector shows up as a removable disk on your computer.
6. Copy the pjconfdata.bin file from your computer to the removable disk.
Note: Do not copy any other files to the removable disk.
7. Once the file has copied, do one of the following: •Windows: Open theMy Computer, Computer,...