Epson Projector Ex5200 UserManual

Displaying and Adjusting the Image51
Adjusting the Position of the Image
If the image is too low on the screen, you can use the front adjustable 
foot to raise it. 
1. Press the foot release lever up and lift the front of the projector.
2. Once the image is positioned where you want it, release the lever 
to lock the foot in position.
3. If the image is tilted or you need to fine-tune the height of the 
image, you can turn the projector’s adjustable rear feet.
Raising the projector may cause the image...

52Displaying and Adjusting the ImageIf your image is still distorted, or you are using the VS200 or EX3200 
projector, do one of the following:
■Press the appropriate keystone correction button on the 
projector’s control panel until the shape is evenly rectangular.
■Select the Keystone setting in the projector’s Settings menu (see 
page 73). Then use the arrow buttons on the remote control to 
adjust the shape of the image.
Keystone correction 
buttons
VS200/EX3200
EX5200/EX7200
Keystone correction...

Displaying and Adjusting the Image53
Focusing and Zooming the Image
Turn the focus ring on the projector to sharpen the image.
VS200/EX3200: to enlarge or reduce the image, press the 
Wide 
(enlarge) or 
Tele (reduce) button on the projector’s control panel. 
You can also use the 
Zoom setting in the projector’s Settings menu; 
see page 73 for instructions.
If the image still isn’t large enough, you may need to move the 
projector farther away from the screen. 
VS200
EX3200
EX5200/EX7200
Wide buttonTele...

54Displaying and Adjusting the ImageYou can also use the 
E-Zoom buttons on the remote control to zoom 
in on a portion of the image. See page 60 for instructions.
EX5200/EX7200: to enlarge or reduce the image, turn the zoom ring.
Selecting the Color Mode
The Color Mode adjusts the brightness, contrast, and color for various 
common viewing environments. Use this setting to quickly obtain a 
good picture.
Press the 
Color Mode button on the remote control to select an 
option. Press it until the option...

Displaying and Adjusting the Image55
■sRGB: Matches the color palette of standard sRGB computer 
displays. 
■Blackboard: Projects accurate colors on a green chalkboard 
(adjusts the white point).
■Whiteboard: For computer presentations in a bright room with 
black-and white text and graphics.
Resizing Video Images
You can resize your images by changing the aspect (width to height) 
ratio (depending on your input signal).
Press the 
Aspect button on the remote control. Press the Aspect 
button repeatedly...

56Displaying and Adjusting the ImageEX7200
■Normal: Displays images using the full projection area and 
maintains the aspect ratio of the image. Choose this setting to 
automatically resize the image and make the best use of the 
display area.
■Auto (HDMI images only): Automatically sets the aspect ratio 
according to the input signal. Choose this setting to project an 
HDMI image in the best aspect ratio.
■16:9: Converts the aspect ratio of the image to 16:9. 4:3 ratio 
images are elongated horizontally...

57
3
Presenting With the Remote 
Control
The projector includes a number of tools to enhance your 
presentation. All of them can be accessed using the remote control, 
which lets you operate the projector from anywhere in the room—up 
to 19.7 feet (6 meters) away. 
This chapter covers:
■Using the remote control
■Controlling the picture and sound
■Operating your computer with the remote control
■Highlighting your presentation
■Presenting a slideshow from a USB device (EX5200/EX7200 
only) 

58Presenting With the Remote Control
Using the Remote Control
Make sure batteries are installed as described on page 90. Follow these 
tips for using the remote control: 
■Point the remote control at the front or back of the projector, or 
at the screen.
■Stand within 19.7 feet (6 meters) of the projector.
■Aim the remote control within 30° to the side of, or 15° above or 
below, the remote control receivers on the projector.
Controlling the Picture and Sound
You can use the remote control to temporarily...

Presenting With the Remote Control59
To turn the image and sound back on, press the button again, or open 
the 
A/V Mute slide.
You can create an image, such as a company logo or picture, to display 
on the screen whenever you press the 
A/V Mute button. (See page 79 
for more information.)
You can also set the 
Lens Cover Timer setting to automatically turn 
off the projector after 30 minutes to protect the projector if the 
A/V Mute slide is closed for a long time. See page 75 for instructions....

60Presenting With the Remote Control
Zooming In on Your Image
You can zoom in on a portion of the image using the E-Zoom buttons 
on the remote control. 
1. Press the 
E-Zoom + button on the remote control. 
You see a crosshair indicating the center of the zoom-in area.
2. Use the arrow (menu navigation) buttons to position the 
crosshair.
3. Continue pressing the 
E-Zoom + button to enlarge the selected 
area up to 4 times.
4. While the image is enlarged, you can:
■Use the arrow buttons to move around...