Epson Projector Ex5200 UserManual

Setting Up the Projector31
Connecting to a Computer
You can connect the projector to a Windows or Macintosh computer 
using the projector’s 
TypeB USB port. This lets you carry a 
lightweight cable with you when you transport the projector (see 
page 31).
You can connect the projector to any computer that has a standard 
video output (monitor) port, including desktop models, PC and 
Macintosh computers, and hand-held devices. See page 34 for 
instructions.
To play sound through the projector, connect an...

32Setting Up the Projector4. Connect the square end of a USB cable to the projector’s 
TypeB 
(square) USB port.
5. Connect the flat end of the cable to any available USB port on 
your notebook or desktop computer.
The first time you connect a computer to the projector’s USB 
port, you will need to install software from the projector on your 
computer (see page 33). 
6. You can connect an optional audio cable if you want to play 
sound through the projector (see page 41). 
When you’ve finished making...

Setting Up the Projector33
Installing Software
The first time you connect a computer to the projector’s USB port, 
you will need to install software from the projector on your computer. 
Follow the instructions for your operating system.
Windows 7 and Windows Vista
When you see the Auto Play window, click Run EMP_UDSE.EXE. 
Follow the instructions on the screen to install the Epson USB 
Display software.
After the software is installed, you see your computer’s current 
desktop displayed by the projector....

34Setting Up the Projector
Connecting to the VGA Computer Port
You can connect to the projector using the VGA computer cable that 
came with it (the monitor port on your computer must be a D-sub 
15-pin port). 
1. Connect one end of the VGA computer cable to the projector’s 
Computer (Component Video) port and the other end to your 
computer’s monitor port.
2. You may need to change the 
Input Signal setting in the 
projector’s Signal menu to 
RGBor Auto (see page 72).
3. You can connect an optional...

Setting Up the Projector35
4. You may also be able to use the remote control as a wireless mouse 
(see page 61).
When you’ve finished making connections, see page 45 for 
instructions on turning on the projector and Chapter 2 for 
instructions on displaying and adjusting the image.
Connecting to Video Equipment 
You can connect several video sources to the projector at the same 
time. Before starting, look at your video equipment to determine its 
available video output connections: 
■EX5200/EX7200 only:...

36Setting Up the Projector
Connecting an HDMI Video Source (EX5200/
EX7200 Only)
For the best image and sound quality, connect your video equipment 
to the HDMI (High-Definition Multimedia Interface) port, if 
possible.
Connect an HDMI cable to the HDMI connector on your video 
equipment and the 
HDMI connector on the projector.
When you’ve finished making connections, see page 45 for 
instructions on turning on the projector and Chapter 2 for 
instructions on displaying and adjusting the image.
note
If...

Setting Up the Projector37
Connecting a Composite Video Source
1. If your video cable has an RCA connector, connect it to the 
yellow video output connector on your device and the yellow 
Video port on the projector.
2. If you want to play sound through the projector, see page 41 for 
instructions on connecting an audio cable.
When you’ve finished making connections, see page 45 for 
instructions on turning on the projector and Chapter 2 for 
instructions on displaying and adjusting the image. 
note
If...

38Setting Up the Projector
Connecting an S-Video Source
1. Connect the S-Video cable to the S-Video connector on your 
device and the 
S-Video port on the projector.
2. If you want to play sound through the projector, see page 41 for 
instructions on connecting an audio cable.
When you’ve finished making connections, see page 45 for 
instructions on turning on the projector and Chapter 2 for 
instructions on displaying and adjusting the image. 
note
If the S-Video cable was not 
provided with your video...

Setting Up the Projector39
Connecting a Component Video Source
If your video equipment has component video connectors (three 
connectors labeled either Y/Cb/Cr or Y/Pb/Pr), you can purchase a 
component-to-VGA video cable from Epson (see page 18) or an 
electronics dealer.
1. Connect the component end of the cable (3 male RCA) to the Y/
Cb/Cr (or Y/Pb/Pr) connectors on your device.
2. Connect the other end of the cable (HD15 male) to the 
Computer (Component Video) port on your projector using an...

40Setting Up the Projector4. If you want to play sound through the projector, see page 41 for 
instructions on connecting an audio cable.
When you’ve finished making connections, see page 45 for 
instructions on turning on the projector and Chapter 2 for 
instructions on displaying and adjusting the image.
Connecting an RGB Video Source
You can connect to an RGB video source using the VGA computer 
cable provided with the projector.
1. Connect the cable to the RGB video port on your player and the...