Epson Projector Emp Tw200h User Manual

E
Printed in China
404662400
03.09-.XA(C01) 

About The Manuals and Notations Used
Types of Manual
The documentation for your EPSON projector is divided into the following four manuals. Refer to the 
manuals in the order given below.
Unpacking and Installation Guide
Lists the accessories that are provided with the projector.
Safety Instructions/World-Wide Warranty Terms
This manual contains information on using the projector safely, and also includes safety instructions, 
world-wide warranty terms booklet and a troubleshooting check sheet.
Be sure...

1
Configuration 
Menu Appendix Troubleshooting
Adjusting projected 
images using a computer
Basic Image Quality 
Adjustments
Contents
Features of the Projector ..................................2
Part names and Functions................................4
Front/Top ................................................................... 4
Control Panel............................................................. 4Remote Control .........................................................5
Rear...

2
Features of the Projector
The optimum images for the location can be projected simply by selecting the desired colour mode from the 
following five preset modes. No complex colour adjustments are required.
If Theatre, Natural or sRGB   is selected, the Epson Cinema Filter effect is applied automatically to 
increase the contrast and to make flesh tones appear with more natural tints.       p.8
The Cinema Color Editor CD-ROM that 
is included with the projector can be 
used to make fine adjustments to...

3
Features of the Projector
Equipped with a wide-angle lens shift function
Wide range of brightness adjustments
A variety of image setting functions
Electronic zoom and focus adjustment
The projectors control panel and the accessory remote control can be used for easy zoom and focus adjustments. An 
adjustment screen is displayed so that adjustment is possible even when no video equipment is connected. For zoom 
adjustment, a high magnification lens is provided to allow images to be increased in size by...

4
Part names and Functions
Front/Top
Control Panel
•
•• •Front adjustable feet Setup Guide
Extend to adjust the projection angle so that 
the projector is horizontal when placed on a 
desk top.
•
•• •Control panel  See below
•
•• •Lamp cover  p.38
Open this cover when 
replacing the lamp inside.
•
•• •Air exhaust vent
•
•• •Remote control light-receiving area 
Setup Guide
Receives signals from the remote control.
•
•• •Vertical lens adjustment dial
Setup Guide
Moves the lens vertically.
•
•• •Horizontal...

5
Part names and Functions
Remote Control
Buttons with no explanation function in the same way as the corresponding buttons on the projectors 
control panel. Refer to Control Panel for further details on these buttons.
•
•• •Menu button  p.23
•
•• •Indicator
Illuminates when remote control 
signals are being output.
•
•• •On/Off buttons Setup Guide
Press to turn the projector power on 
and off.
•
•• •Color Mode button  p.8
Displays a selection menu for 
selecting the colour mode.
•
•• •Memory button...

6
Part names and Functions
Rear
Base
•
•• •[InputB] port Setup Guide
Connects to the RGB port of a computer.
•
•• •[InputA] port Setup Guide
Connects to the component video (YCbCr 
or YPbPr
) ports or RGB ports of other 
video equipment.
•
•• •[D4] port Setup Guide
Connects to the component video 
(YCbCr or YPbPr) ports or D port 
of other video equipment.
(Japan only)
•
•• •[S-Video] port Setup Guide
Inputs an S-Video signal to the projector from 
other video equipment.
•
•• •[Control (RS-232C)] port...

7
Appearance
Centre of projector
Centre of lens
*1 Distance from centre of lens to suspension bracket fixing point
(Lens shift amount: Max. 8.7 mm upwards, Max. 4.3 mm downwards)
*2 Distance from centre of lens to centre of projector
(Lens shift amount: Max. 7.7 mm to the left and right)88
*2
440
5
134 120
56.2
*1
14
112.6 218.4 243.4
10.4235 32045
4-M4×8
Units: mm
Centre of lens
19.4
TW200-E.book  Page 7  Monday, September 1, 2003  5:19 PM 

8
Basic Image Quality Adjustments
Selecting the Color Mode
Selecting the Image Aspect
Selecting the Image Aspect
Selecting the Color Mode
Default setting
When signals from the [Video], [S-Video] or [D4] 
port are being projected: Auto
When signals from the [InputA] or [InputB] port are 
being projected: Normal
If the signals are being input to the [Video], 
[S-Video] or [D4] port, the optimum aspect is 
selected in accordance with the signal as follows.
* If Auto is not suitable, the setting will become...