Epson Projector Emp S1 User Manual

10
EMP-S1 User’s Guide
InstallationInstallation methodSet up the projector so that it is at right angles to a screen.
Projection distance and screen size
The values should be used as a guide for setting the projector.
c
Be sure to read the Safety Instructions / World-Wide Warranty 
Terms guide before installation.
p
When setting up the projector against a wall, leave a space of at 
least 20cm between the projector and the wall.
Projection distance:
87-1109cm
20cm (7.9in.) or more
4:3 Screen size...

11
EMP-S1 User’s Guide Before Using the Projector > Installation
Other installation methodsfRear projection
(Using a translucent screen)
fCeiling projectionfCeiling/Rear projection
(Using a translucent screen)
* The optional ceiling mount is required when installing the projector from 
a ceiling. Please contact your dealer if you wish to use this method, as 
special equipment is required for installation. sOptional Accessories 
P.60p
When using rear projection, or projecting from a ceiling, select 
the...

12
EMP-S1 User’s Guide
Connecting to a ComputerCompatible computersCondition 1: Check that the computer has an image output port, such 
as an RGB port, monitor port or CRT port.
Some computers with an in-built monitor and some laptop 
computers may not be compatible. Please refer to your 
computer manual for further details.
Condition 2: The display frequency and resolution of the computer 
must correspond to that of the projector. sSupported 
Display Resolutions P.66
fLaptop connection
Setup examples...

13
EMP-S1 User’s Guide Before Using the Projector > Connecting to a Computer
Projecting images from a computerDifferent cables are used depending on whether the monitor port of 
your computer is a Mini D-Sub 15Pin, 5BNC
g or 13w3 port.
fWhen using a Mini D-Sub 15 pin connector
fWhen using a 5BNC portfWhen using a 13w3 port
To monitor port
To Computer / 
Component Video port Computer cable (accessory)To monitor port
VGA-HD15 / BNC PC cable (optional) To Computer / 
Component Video port
p
 Select Computer...

14
EMP-S1 User’s Guide Before Using the Projector > Connecting to a Computer
Playing sound from a computerYou can play sound from a computer through the projectors in-built 
speaker.fVolume adjustment
Press [a] or [b] on the remote control.
You can also adjust the volume from the configuration menu.
[Menu] button → Setting → Volume sSetting menu P.38
Connecting to an external monitorThe image being input into the projector can be displayed on a 
computer monitor.
p
When using computer and video equipment...

15
EMP-S1 User’s Guide Before Using the Projector > Connecting to a Computer
Presentation Remote ControllerYou can use the Presentation Remote Controller as a wireless mouse 
to control the mouse pointer on the computer screen.fCompatible computers
Windows:   Windows 98 / 2000 / Me / XP
(Only compatible with the full versions of Windows. 
Upgraded versions cannot be used.)
Macintosh: Mac OS 9.1 or later
fInstalling the driver (Windows)
Screen contents will differ according to the version of Windows you...

16
EMP-S1 User’s Guide Before Using the Projector > Connecting to a Computer
C
Keeping the defaults, click Next.
D
Click the check box next to Specify a location and 
type C:\WINDOWS. Click Next
E
Click on Next to confirm the message which is 
displayed.
F
Click on Finish.The installation of the driver is complete.
p
 You may need to enter a different location to search for the OS 
files that you are using.
 Click on Browse if you want to change the default search 
location.
p
The driver installation...

17
EMP-S1 User’s Guide Before Using the Projector > Connecting to a Computer
fPart Names and Functions
Operate the Presentation Remote Controller by aiming it at the Presentation Remote Receiver.
When using the Freeze or A/V Mute functions, aim the presentation remote control towards the remote control infrared receiver of the projector.
fOperating range 
Operable distance: Max. approx. 6m (20ft.) 
(May be shorter depending on conditions.)
Operable angle:      approx. 30° horizontally, 15° vertically
[L...

18
EMP-S1 User’s Guide
Connecting to Video EquipmentProjecting video imagesfFor Composite Video (DVD, VHS, Video games)fFor S-Video (DVD, S-VHS, Video games)
fFor Component Video (DVD, Video games)
c
When connecting, be sure to:
 Turn off the power for both the projector and the video 
equipment.
Damage may result if you try to make a connection when the 
power is switched on.
 Check the connector types.
Damage may result if you attempt to insert a connector into the 
incorrect port.
To video 
out...

19
EMP-S1 User’s Guide Before Using the Projector > Connecting to Video Equipment
fFor RGB Video
Playing sound from video equipmentfVolume adjustment
Press [a] or [b] on the remote control.
You can also adjust the volume with the configuration menu.
[Menu] button → Setting → Volume sSetting menu P.38
p
 After projection starts, change the Input Signal setting in the 
Image menu to Computer. s P.35
 For an RGB connection, a commercially available adapter or 
converter cable may be required.
Computer...