Epson Projector Emp 9100 User Manual

							 P in P Function - 59
P in P Function
The video image will be displayed as a sub-screen inside the computer image or video image.
1Press the [P in P] button.
Operation instructions will be displayed at the bottom left-hand side of the sub-screen sit-
uated at the top right-hand side of the main screen.
2Press the [Enter] button on the remote control to move the position of the sub-screen.
3Press the [E-Zoom] button to change the size of the sub-screen.
4Press the [1] button to switch across to sub-screen sound.
Press the [2] button to return to the main-screen sound after the sound has been switched.
5Press the [Enter] button to set the sub-screen display.
The operation guide in the bottom left-hand corner will be erased.
Point
·The sub-screen will be erased when the [PinP] button is pressed again.
·The computer image or video image will be displayed in the main screen and the video 
image (Video, S-Video) will be displayed in the sub-screen, and the video image on the 
sub-screen can be amended with the PinP settings. (see page 67
)
·Switch the position, size, and sound of the sub-screen prior to fixing the sub-screens dis-
play.
·The sub-screen can be switched between five different sizes. 
						

							60 - Volume Adjustment
Volume Adjustment
The volume can be amended when sound is emitted from the projector speakers.
1Press the [Volume+, -] button while pressing the [Shift] button([Volume+, -]button on 
the remote control).
Point
Adjustment is not possible when no sound signals are being input.
Power
Video
Computer
A/V mute
Resize
EscHelpMenu
ShiftKeystoneVolume
Keystone
VolumeSync.
Sync.TrackingTrackingShift
EscMenu
Comp1
P in P PresetVideoHelp
- Volume +
- Volume +Comp2/YCbCr
AutoResize 
						

							 Menu Configuration - 61
Menu Configuration
The setup menu enables the various adjustments and settings to be made.
Menu items
The menus are split into top menus and sub menus and consist of a hierarchy structure. Also, 
the image menu will differ in accordance with the input source (connected port).

  Menu items
Point
·The items displayed on the image menu will differ in accordance with the projected input 
source, and menus other than that belonging to the projected input source cannot be 
adjusted. When the input source is switched with the menu displayed as it is, the menu 
will be automatically switched to the one for the relevant input source.
·The image menu cannot be adjusted when no image signals are being input.
Image menu ·  Computer (D-Sub 15/BNC) Image menu · Computer (DVI-D)
Image menu · Video (Video/S-Video) Image menu · Vi d e o  ( B N C )
Position
Tracking
Sync.
Brightness
Contrast
Sharpness
Gamma
Resolution
Preset
ResetAdjustment
Select
Execute :
:
:
:
:
:
:9999
99
0
0
0
Auto
Normal DynamicNatural
Manual
[]Select
Top menus Sub menus (image)
Position
Tracking
Sync.
Brightness
Contrast
Sharpness
Gamma
Resolution
Preset
ResetAdjustment
Select
Execute :
:
:
:
:
:
:9999
99
0
0
0 Video
Audio
Effect
Setting
Capture
Advanced
About
Reset All
Auto
Normal DynamicNatural
Manual
[]Select
:Select :Enter
Brightness
Contrast
Sharpness
Gamma
Reset Execute:
:
:
:0
0
0 Video
Audio
Effect
Setting
Capture
Advanced
About
Reset All
Normal DynamicNatural
:Select :Enter
Position
Brightness
Contrast
Color
Tint
Sharpness
Gamma
Smooth Motion
Video Signal
ResetAdjustment
Select    [Auto              ]
Execute :
:
:
:
:
:
:0
0
0
0
0 Video
Audio
Effect
Setting
Capture
Advanced
About
Reset All
ON
Normal DynamicNatural
OFF
:Select :Enter
Position
Brightness
Contrast
Color
Tint
Sharpness
Gamma
Smooth Motion
Video Signal
ResetAdjustment
Select    [Auto              ]
Execute :
:
:
:
:
:
:0
0
0
0
0 Video
Audio
Effect
Setting
Capture
Advanced
About
Reset All
ON
Normal DynamicNatural
OFF
:Select :Enter 
						

							62 - Menu Configuration
Point
The lamp illumination time is displayed in units of 0H between 0 and 10 hours, and, in units 
of 1 hour above 10 hours.
Sound menu Effect menu
Setup menu  Capture menu
Advance settings menu Information menu
The information menu displays the setup status of 
the projected input source
All reset menu
Volume
Treble
Bass
SRS SPACE
SRS CENTER
ResetExecute :
:
:
:
:0
0
0
0
0 Video
Audio
Effect
Setting
Capture
Advanced
About
Reset All
:Select :Enter
1 Cursor/Stamp
2 Box
3 Spotlight
4 Bar
Cursor Speed
Reset:LSetting
Setting
Setting
Setting
Execute
MH
Video
Audio
Effect
Setting
Capture
Advanced
About
Reset All
:Select :Enter
Keystone
P in P
No-Sigual Msg.
Prompt
A/V Mute
BNC
DPMS
Reset 
Execute :
:
:
:
:
:
:0
OFFBlackONOFFBlue
BlackBlueRGBYCbCrONOFF
Logo
LogoCompositeS-VideoVideo
Audio
Effect
Setting
Capture
Advanced
About
Reset All
:Select :Enter
 
Users Logo Capture 
ExecuteVideo
Audio
Effect
Setting
Capture
Advanced
About
Reset All
:Select :Enter
Language
Startup Screen
Color Setting
Comp2Sync Termination
Rear Proj.
Ceiling
ResetSelect  [English]
Execute :
:
:
: Video
Audio
Effect
Setting
Capture
Advanced
About
Reset All
AutoManualONOFF
ONOFFONOFF
ON :OFFSelect
:Select :Enter
Lamp ON Time
Video Source
Frequency
Sync Polarity
Sync Mode
Resolution
Refresh Rate
9999 H
Computer
H 999. 99 KHz
V 999. 99 Hz
H Positive
V Negative
Sync On Green
9999x9999
999. 9 Hz :
:
:
:
:
:
:
:
: Video
Audio
Effect
Setting
Capture
Advanced
About
Reset All
:Select :Enter
Execute
Video
Audio
Effect
Setting
Capture
Advanced
About
Reset All
:Select :Enter 
						

							 Menu Operations - 63
Menu Operations
The menus can be operated from both the projector and the remote control unit.
Operation method
1Press the [Menu] button.
The top menu will be displayed.
2Select the required item.
Press the [Sync +, -] button on the projector (lower the [Enter] button up or down on the 
remote control unit) to select the required item.
3Set the selected item.
Press the [ (Enter)] button on the projector (the [Enter] button on the remote control 
unit) to set the selected item.
The sub-menu will be displayed.
4Then select the detailed sub item.
Press the [Sync +, -] button on the projector (lower the [Enter] button up or down on the 
remote control unit) to select the sub item.
The items displayed on the image menu and information menu will differ in accordance 
with the projected input source.
Power
Video
A/V mute
Resize
EscHelpMenu
ShiftKeystoneVolume
Sync.
Sync.
TrackingTrackingMenuComputerMenu
EscMenu
Comp1
P in P PresetVideoHelp
- Volume +
Comp2/YCbCr
AutoResize
Video
Audio
Effect
Setting
Capture
Advanced
About
Reset All
Language
Startup Screen
Color Setting
Comp2Sync Termination
Rear Proj.
Ceiling
ResetSelect  [English]
Execute :
:
:
:
AutoManualONOFF
ONOFFONOFF
ON :OFFSelect 
						

							64 - Menu Operations
5Select the parameter value.
Press the [Tracking +, -] button on the projector (lower the [Enter] button left or right on 
the remote control unit) to select the parameter value.
Point
·(Enter) is attached to the rear of the sub item names that execute the parameters and 
continue onto the lower hierarchies. Press the [Enter] button to set this selection, and then 
select the parameter setting again.
·Refer to the list of settings for further information on the function of each setting. (see 
page 65)
6Set all of the other items in the same way.
7Press the [Menu] button.
The menu will end.
Point
·Press the [ESC] button to return to the previous menu in the hierarchy.
·The items displayed on the image menu will differ in accordance with the projected input 
source, and menus other than that belonging to the projected input source cannot be 
adjusted.
·Image menus cannot be adjusted when no image signals are being input.
·The last setup screen will be displayed when a menu is ended and then displayed again 
(the same status as immediately prior to ending the menu with procedure #7.)
Language
Startup Screen
Color Setting
Comp2Sync Termination
Rear Proj.
Ceiling
ResetSelect  [English]
Execute :
:
:
:
AutoManualONOFF
ONOFFONOFF
ON :OFFSelect 
						

							 Menu Operations - 65
Setting items
To p  
MenuSub MenuFunctionDefault Value
Video Position Moves the image’s display position up, down, left and right.
Press the [Enter] button to make the required adjustments on 
the adjustment screen displayed.Center value
Tracking Adjusts vertical stripes that appear on the Computer image. Depends on the 
connection 
signals
Sync. Adjusts disturbance, blurring and vertical noise that appears 
on the Computer image.
·Disturbance and blurring may occur as a result of adjusting 
the brightness and contrast.
·It is possible to regulate the vividness of the image by 
adjusting the synchronization after adjusting the tracking.0
Brightness Adjusts the brightness of the image. Center value
Contrast Adjusts the contrast of the image. Center value
Color Adjusts the color depth of the image. Center value
Tint Adjusts the tint of the image. Center value
Sharpness Adjusts the sharpness of the image. Center value
Gamma Corrects the color vividness of the image.
Dynamic: Produces an image with clear color differences. 
Suitable for displaying plans, etc.
Normal: Projects tint without correction.
Natural: Produces an image with natural tint. Suitable for 
video images.Normal
Resolution Sets the input resolution.
Auto: Automatically adjusts the input resolution.
Manual: Press the [Enter] button and select the required set-
ting from the input resolution selection menu displayed.Audio
Preset It is possible to save the current computer input signal 
adjustment values (input resolution, tracking, synchroniza-
tion signals, Brightness, Contrast, Sharpness, Gamma dis-
play position).
Press the [Enter] button and select the preset number under 
which registration is to be performed from the preset selec-
tion menu displayed.
·The adjustment values registered under a preset number 
represent the current status of the system. Ensure that the 
optimum values have been set up before registering this 
data.
·The preset adjustment values can be called out by pressing 
the [Preset] button. (see page 48
)Not registered
Smooth Motion Images, etc., will move smoothly when seen after this has 
been set at [ON]. Set this at [OFF] if the colors appear to 
flicker.ON 
						

							66 - Menu Operations
Video Video Signal Sets the video signal method.
Press the [Enter] button and select the required setting from 
the video signal method selection menu displayed.
·The video signal method will be automatically set up in the 
[Auto] mode, but do not use the [Auto] mode for the PAL 
system (60Hz).Auto
Reset Returns all image menu adjustment values to the default val-
ues.
Press the [Enter] button and then select [Yes] on the confir-
mation screen displayed.
·Select [Reset All] to return all image and sound values to the 
default settings. (see page 69
)-
Sound Volume Adjusts the volume. 15
Treble Adjusts the strength of the high tones. Center value
Bass Adjusts the strength of the low tones. Center value
SRS Space Adjusts the width of the sound. 2
SRS Center Adjusts the depth of the sound. 2
Reset Returns all sound menu adjustment values to the default val-
ues.
Press the [Enter] button and then select [Yes] on the confir-
mation screen displayed.
·Select [Reset All] to return all image and sound values to the 
default settings. (see page 69
)-
Effect Cursor/Stamp Sets the shape, size, color and length of the cursor/stamps 
allocated to the [1] button.
Press the [Enter] button and select the item to be displayed 
from the cursor/stamp setup menu. The shape, size, color 
and length conditions can be set by pressing button types 1 
to 3 respectively (depending on the selected cursor shape, 
size, color and length cannot be set up.)
·The [1] button executes the cursor/stamp function. The 
cursor/stamp types will be switched between 1 and 3 
sequentially for each time the [1] button is pressed. (see 
page 56)Individual
settings 
between types 1 
to 3
Box Sets the use/non-use and shape of the color and shading of 
Box allocated to the [2] button.
Press the [Enter] button and select the required item from the 
Box setup menu.
·The [2] button executes the Box function. (see page 56
)Color: Magenta
Shading: No
Shape: Square
Spotlight Sets the size of the spotlight allocated to the [3] button.
Press the [Enter] button and select the required item from the 
spotlight setup menu.
·The [3] button executes the spotlight function. (see page 57
)Size: Medium
To p  
MenuSub MenuFunctionDefault Value 
						

							 Menu Operations - 67
Effect Bar Sets the color, direction and width of the bar allocated to the 
[4] button.
Press the [Enter] button and select the required item from the 
bar setup menu. The color, direction and width can be 
selected independently for each of the settings between 1 
and 3.
·The [4] button executes the bar function. The bar types will 
be switched between 1 and 3 sequentially for each time the 
[4] button is pressed. (see page 58
)Individual
settings 
between types 1 
to 3
Cursor Speed Selects the speed of Cursor.
L: Slow M:Medium H:FastM
Reset Returns all effect menu adjustment values to the default val-
ues.
Press the [Enter] button and then select [Yes] on the confir-
mation screen displayed.
·Select [Reset All] to return all image and sound values to the 
default settings. (see page 69
)-
Set-
tingKeystone Adjusts trapezoid distortion.
·The screen will be reduced in size when trapezoid 
correction has been performed.
·The status of trapezoid correction will be recorded. Perform 
readjustments that match the installation position when the 
projection position or angle have been changed.
·Reduce the sharpness if blurring occurs after trapezoid 
correction. (see page 65
)Center value
P in P Sets the input source for the P in P function’s sub-screen.
·The P in P function is executed by pressing the [PinP] 
button. (see page 59
)Composite
No Signal Msg The status for [No Image Signal Input] and other message 
display.
·The user logo must be registered and set up before it can be 
amended.Blue
Prompt Sets whether to display the input source on the screen or not. ON
A/V Mute Sets up the screen status for when the [A/V Mute] button is 
pressed.
·User logos must be registered and set up before they can be 
amended. Black
BNC Sets the mode for the input image signals connected to the 
BNC port.
RGB: Enables RGB signals to be input.
YCbCr: Enables video signals to be input (YCbCr or YPbPr.)RGB
To p  
MenuSub MenuFunctionDefault Value 
						

							68 - Menu Operations
Set-
tingSleep Mode Sets the energy-saving function for when no image signals 
are being input. When this is set at [ON], projection will be 
automatically ended and the projector will enter the sleep 
mode if no image signals are input and no operations are 
performed for a period of thirty minutes (the operation indi-
cator will be illuminated in orange).
Press the [Power] button to restart projection.ON
Reset Returns all setting menu adjustment values to the default 
values.
Press the [Enter] button and then select [Yes] on the confir-
mation screen displayed.
·Select [Reset All] to return all image and sound values to the 
default settings. (see page 69
)-
Cap-
tureUser’s Logo 
CaptureRegisters user logos. (see page 70
)
Press the [Enter] button and follow the instructions dis-
played on the confirmation screen.
·The saving procedure requires a certain amount of time to 
complete. Do not attempt to operate the projector or the 
equipment connected to the projector while this procedure 
is running. Failure to observe this may result in damage.
·The size that can be registered is 400 x 300 dots.
·The display size will be adjusted when video images are 
being projected.Not registered
Adva
ncedLanguage Sets the language with which messages are to be displayed.
Press the [Enter] button and select the required language 
from the language selection menu displayed.Japanese
Startup Screen Displays the user logo during warm-up after the power has 
been switched on.
·The user logo must be registered and set up before it can be 
amended.OFF
Color Setting Adjusts the color temperature of the image.
Auto: Automatically adjusts the color settings.
Manual: Press the [Enter] button and select the required item 
from the color setting menu displayed.
·Set the color temperature value to the yardstick value.
·The black level and white level settings are only used when 
multiple projectors are used in the stack formation.Auto
To p  
MenuSub MenuFunctionDefault Value