Epson Projector Emp 8300 User Manual
Have a look at the manual Epson Projector Emp 8300 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 66
65
Functions for Enhancing Projection Functions for Enhancing Projection
Once the settings have been made, select Preset in
the sub-menu and then press the [Enter] button on
the remote control or the [Auto/Enter] button on the
projectors control panel.Select a number (1–10) for saving the settings.
Press the [Enter] button on the remote control or the
[Auto/Enter] button on the projectors control panel to
save the Video menu settings.
When the settings have been saved, the input resolution will...](http://img.usermanuals.tech/thumb/23/89719/w64_epson-emp-8300-manual_d-65.png "Page 66
65
Functions for Enhancing Projection Functions for Enhancing Projection
Once the settings have been made, select Preset in
the sub-menu and then press the [Enter] button on
the remote control or the [Auto/Enter] button on the
projectors control panel.Select a number (1–10) for saving the settings.
Press the [Enter] button on the remote control or the
[Auto/Enter] button on the projectors control panel to
save the Video menu settings.
When the settings have been saved, the input resolution will...")
![Page 67
66
Functions for Enhancing Projection Functions for Enhancing Projection
PROCEDUREWhile projecting analogue RGB images from a computer,
press the [Preset] button on the remote control to apply
the saved setting values for the Video menu to the
images that are currently being projected.
The memorised preset number changes in ascending order starting
from the lowest recording area number each time the button is
pressed.
You must press the [Preset] button while the preset number and input
resolution...](http://img.usermanuals.tech/thumb/23/89719/w64_epson-emp-8300-manual_d-66.png "Page 67
66
Functions for Enhancing Projection Functions for Enhancing Projection
PROCEDUREWhile projecting analogue RGB images from a computer,
press the [Preset] button on the remote control to apply
the saved setting values for the Video menu to the
images that are currently being projected.
The memorised preset number changes in ascending order starting
from the lowest recording area number each time the button is
pressed.
You must press the [Preset] button while the preset number and input
resolution...")
![Page 68
67
Functions for Enhancing Projection Functions for Enhancing Projection
If the input resolution is lower than the panel resolution (1024 × 768)
If the input resolution is higher than the panel resolution (1024
× 768)
Resized display Real display
The image is projected in the
middle of the screen at the original
input signal resolution.
Resized display Real display
The middle section of the image is
projected. You can tilt the [ ]
button on the remote control to
scroll around the image.
TIP
The...](http://img.usermanuals.tech/thumb/23/89719/w64_epson-emp-8300-manual_d-67.png "Page 68
67
Functions for Enhancing Projection Functions for Enhancing Projection
If the input resolution is lower than the panel resolution (1024 × 768)
If the input resolution is higher than the panel resolution (1024
× 768)
Resized display Real display
The image is projected in the
middle of the screen at the original
input signal resolution.
Resized display Real display
The middle section of the image is
projected. You can tilt the [ ]
button on the remote control to
scroll around the image.
TIP
The...")
![Page 69
68
Functions for Enhancing Projection Functions for Enhancing Projection
You can switch the aspect ratio
between 4:3 and 16:9 when component
video
(YCbCr
and YPbPr
), S-Video
and composite video signals
are being projected. Images that have been recorded in digital video and
DVD images can be projected in 16:9 wide-screen format.
PROCEDUREThe display changes each time you press the [Resize]
button on either the remote control or the projectors
control panel.For SDTVWhen images that are output...](http://img.usermanuals.tech/thumb/23/89719/w64_epson-emp-8300-manual_d-68.png "Page 69
68
Functions for Enhancing Projection Functions for Enhancing Projection
You can switch the aspect ratio
between 4:3 and 16:9 when component
video
(YCbCr
and YPbPr
), S-Video
and composite video signals
are being projected. Images that have been recorded in digital video and
DVD images can be projected in 16:9 wide-screen format.
PROCEDUREThe display changes each time you press the [Resize]
button on either the remote control or the projectors
control panel.For SDTVWhen images that are output...")
![Page 70
69
Functions for Enhancing Projection Functions for Enhancing ProjectionProjector ID/Remote Control ID
If using more than one projector at a time, such as at a show, you can
record ID numbers for the projectors and for the remote controls in order to
simultaneously operate projectors with the same ID number. Alternatively,
if you set the remote control ID to 0, all projectors can be operated by the
remote control regardless of the projector ID numbers.PROCEDURE
Press the [Menu] button on either the...](http://img.usermanuals.tech/thumb/23/89719/w64_epson-emp-8300-manual_d-69.png "Page 70
69
Functions for Enhancing Projection Functions for Enhancing ProjectionProjector ID/Remote Control ID
If using more than one projector at a time, such as at a show, you can
record ID numbers for the projectors and for the remote controls in order to
simultaneously operate projectors with the same ID number. Alternatively,
if you set the remote control ID to 0, all projectors can be operated by the
remote control regardless of the projector ID numbers.PROCEDURE
Press the [Menu] button on either the...")
![Page 71
70
Functions for Enhancing Projection Functions for Enhancing Projection
Use the [ ] button on the remote control or the
[Tracking +] or [Tracking -] button on the projectors
control panel to select the desired ID number (1–9).
Press the [Enter] button on the remote control or the [Auto/
Enter] button on the projectors control panel to accept the ID
number setting.Once the setting has been made, press the [Menu]
button to close the configuration menu.
When the ID number is registered, the projector...](http://img.usermanuals.tech/thumb/23/89719/w64_epson-emp-8300-manual_d-70.png "Page 71
70
Functions for Enhancing Projection Functions for Enhancing Projection
Use the [ ] button on the remote control or the
[Tracking +] or [Tracking -] button on the projectors
control panel to select the desired ID number (1–9).
Press the [Enter] button on the remote control or the [Auto/
Enter] button on the projectors control panel to accept the ID
number setting.Once the setting has been made, press the [Menu]
button to close the configuration menu.
When the ID number is registered, the projector...")
![Page 72
71
Functions for Enhancing Projection Functions for Enhancing Projection
TIP
If you would like to check the ID number that is currently set for a
remote control, press the [ID] button on the remote control so that the
button lights, and then press the [ID] button once more. After a brief
period, the [ID] button will flash, and the number of flashes will equal
the remote controls ID number.](http://img.usermanuals.tech/thumb/23/89719/w64_epson-emp-8300-manual_d-71.png "Page 72
71
Functions for Enhancing Projection Functions for Enhancing Projection
TIP
If you would like to check the ID number that is currently set for a
remote control, press the [ID] button on the remote control so that the
button lights, and then press the [ID] button once more. After a brief
period, the [ID] button will flash, and the number of flashes will equal
the remote controls ID number.")
![Page 73
72
Using the Configuration Menu FunctionsThe configuration menus can be used to carry out a variety of settings and adjustments.
The menus have a hierarchical structure, with a main menu that is divided into sub-menus, which are further divided into other sub-menus.
Refer to Using the Configuration Menus ( p.90) for details on using the menus.
Video
Audio
Color Mode Position
Tracking
Sync.
Brightness
Contrast
Sharpness
:
: :
: :
Select 0000
0
0
0
+
-+
-
Adjust
[Presentation ]
:
:...](http://img.usermanuals.tech/thumb/23/89719/w64_epson-emp-8300-manual_d-72.png "Page 73
72
Using the Configuration Menu FunctionsThe configuration menus can be used to carry out a variety of settings and adjustments.
The menus have a hierarchical structure, with a main menu that is divided into sub-menus, which are further divided into other sub-menus.
Refer to Using the Configuration Menus ( p.90) for details on using the menus.
Video
Audio
Color Mode Position
Tracking
Sync.
Brightness
Contrast
Sharpness
:
: :
: :
Select 0000
0
0
0
+
-+
-
Adjust
[Presentation ]
:
:...")
![Page 76
75
Using the Configuration Menu Functions Using the Configuration Menu Functions
Reset Resets all adjustments values for the Video menu
functions to their default settings.
Press the [Enter] button on the remote control or the
[Auto/Enter] button on the projectors control panel to
reset.
Select Reset All to reset all menu settings – including
settings for the Video and Audio menus – to their
default settings. p.89-
Sub-menu
Function
Default](http://img.usermanuals.tech/thumb/23/89719/w64_epson-emp-8300-manual_d-75.png "Page 76
75
Using the Configuration Menu Functions Using the Configuration Menu Functions
Reset Resets all adjustments values for the Video menu
functions to their default settings.
Press the [Enter] button on the remote control or the
[Auto/Enter] button on the projectors control panel to
reset.
Select Reset All to reset all menu settings – including
settings for the Video and Audio menus – to their
default settings. p.89-
Sub-menu
Function
Default")
70 Functions for Enhancing Projection Functions for Enhancing Projection Use the [ ] button on the remote control or the [Tracking +] or [Tracking -] button on the projectors control panel to select the desired ID number (1–9). Press the [Enter] button on the remote control or the [Auto/ Enter] button on the projectors control panel to accept the ID number setting.Once the setting has been made, press the [Menu] button to close the configuration menu. When the ID number is registered, the projector cannot be operated by remote control unless the remote control used has the same ID number or has an ID number of 0. PROCEDURE Press the [ID] button on the remote control.The [ID] button will light.Press the [0] to [9] buttons on the remote control to specify the ID number for the remote control. The light for the [ID] button will turn off and the registration will be complete. If a number other than 0 is registered, the remote control will only be able to operate projectors that have the same ID number. 2 Brightness ControlHighLow : Video Audio Setting Users Logo Advanced1 About Reset All Projector ID NetworkReset Execute : 6 [Menu]: Exit EffectAdvanced2 COM Port BNC Sync Termination : ONOFF: Set Set RS-232CUSB [ / ]: Select [ ESC ]: Return[ ]: Set Auto Setup :ONOFF: 3 Registering an ID Number for a Remote Control1 Remote control 2 Remote control
71 Functions for Enhancing Projection Functions for Enhancing Projection TIP If you would like to check the ID number that is currently set for a remote control, press the [ID] button on the remote control so that the button lights, and then press the [ID] button once more. After a brief period, the [ID] button will flash, and the number of flashes will equal the remote controls ID number.
72
Using the Configuration Menu FunctionsThe configuration menus can be used to carry out a variety of settings and adjustments.
The menus have a hierarchical structure, with a main menu that is divided into sub-menus, which are further divided into other sub-menus.
Refer to Using the Configuration Menus ( p.90) for details on using the menus.
Video
Audio
Color Mode Position
Tracking
Sync.
Brightness
Contrast
Sharpness
:
: :
: :
Select 0000
0
0
0
+
-+
-
Adjust
[Presentation ]
:
:
ResolutionReset
Execute
:
[
]
[ ]: Enter [ ]: Select[Menu]: Exit
Reset All About Advanced2 Advanced1 Users Logo Setting Effect
Preset
AutoManualAutoManual
SetAdjust
Select
Main menu Sub-menu (Video)
73
Using the Configuration Menu Functions Using the Configuration Menu FunctionsList of Functions
• The functions in the Video menu apart from Resolution and Video Signal cannot be adjusted while no video signal is being input.
The functions which appear in the Video menu will change depending on the type of input source being projected. Functions which are not available in the
Video menu for a particular input source cannot be adjusted.Video MenuComputer (Analogue RGB)
Computer (Digital RGB)
Video
Audio
Color Mode Position
Tracking
Sync.
Brightness
Contrast
Sharpness
:
: :
: :
Select 0000
0
0 0 0 0
+
-+
-
Adjust
[Presentation ][Presentation ]
:
:
ResolutionReset
Execute
:[
]
[ ]: Enter [ ]: Select[Menu]: Exit
Reset All About Advanced2 Advanced1 Users Logo Setting Effect
Preset
AutoManualAuto
ManualSetAdjust
Select
Video
Audio
Color Mode Contrast
Sharpness
: :
Select 0
+
-
Adjust
[Presentation ]
Reset
Execute
[ ]: Enter [ ]: Select[Menu]: Exit
Reset All About Advanced2 Advanced1 Users Logo Setting Effect
Auto
Manual
Brightness 0
+
-
:
Sub-menu
Function
Default
Position (Adjustment is only possible when analogue RGB signals
are being input)
Moves the image display position vertically and
horizontally.
Press the [Enter] button on the remote control or the
[Auto/Enter] button on the projectors control panel and
make the adjustment.Depends on
connection
Tracking
(Adjustment is only possible when analogue RGB signals
are being input)
Adjusts computer images when vertical stripes appear in the
images.Depends on
connection
Sync.(Adjustment is only possible when analogue RGB signals
are being input)
Adjusts computer images when flickering, fuzziness or
interference appear in the images.
Flickering and fuzziness may also occur when the
brightness, contrast
, sharpness and keystone correction
settings are adjusted.
You can obtain the best results if you adjust the tracking
first and then adjust the synchronization.Depends on
connection
Brightness Adjusts the image brightness. Median value (0)
Contrast
Adjusts the difference between light and shade in the
images.
Auto : The contrast is adjusted automatically to the ideal
level.
Manual: Contrast is adjusted manually.Auto
Sharpness Adjusts the image sharpness. Median value (0)
74 Using the Configuration Menu Functions Using the Configuration Menu Functions Color ModeCorrects the vividness of the image colour. The settings can be saved separately for each type of source (computer or video source). You can select from five different quality settings depending on the surroundings. Dynamic : Images are modulated and made fresher to emphasise brightness. Presentation : Brightness is emphasized. For presentations in bright rooms. Theatre : Movie images are optimised using natural tints. Living Room :Brightness is emphasized. Ideal for playing video games in bright rooms. sRGB: Images conform to the sRGB standard. If set to sRGB, the colour temperature for the Color Adjustment command in the Advanced1 menu will be set to 6500K.Presentation Resolution (Selection is only possible when analogue RGB signals are being input and are selected) Sets the input resolution for the signal source being used. Auto : The input resolution is set automatically in accordance with the input signal. Manual: The input resolution is selected manually.Auto Preset (Recording is only possible when analogue RGB signals are being input) Allows Video menu settings to be saved and then applied to analogue RGB images that are being projected by pressing the [Preset] button on the remote control. The current settings are saved when a preset number (1 to 10) is selected. Preset numbers which already have saved settings show the input resolution that has been set. If setting values have been changed, existing settings that have been saved under a preset number can be overwritten by selecting that preset number.- Sub-menu Function Default
75 Using the Configuration Menu Functions Using the Configuration Menu Functions Reset Resets all adjustments values for the Video menu functions to their default settings. Press the [Enter] button on the remote control or the [Auto/Enter] button on the projectors control panel to reset. Select Reset All to reset all menu settings – including settings for the Video and Audio menus – to their default settings. p.89- Sub-menu Function Default
76
Using the Configuration Menu Functions Using the Configuration Menu Functions
Component Video
(YCbCr
, YPbPr
)
RGB Video
Adjust
+
-+
-+
-+
-+
-
Video
Audio
Setting
Users Logo
Advanced1 0
0
0
0 0
Color Mode Position
Brightness
Contrast
Color
Tint
Sharpness:
: :
: :
Select[Dynamic ]
[Menu]: Exit
Reset
Execute
[ ]: Enter [ ]: Select
Reset All About Advanced2 Effect
Adjust
+
-+
-+
-
Video
Audio
Setting
Users Logo
Advanced1Color Mode Position
Brightness
Contrast
Sharpness:
: : 0
0
0
Select[Dynamic ]
[Menu]: Exit
[ ]: Enter [ ]: Select
About
Reset AllAdvanced2Effect
Reset
Execute
Video (Composite video
, S-Video
)
Sub-menu
Function
Default
Position Moves the image display position vertically and
horizontally.
Press the [Enter] button on the remote control or the
[Auto/Enter] button on the projectors control panel and
make the adjustment.Depends on
connection
Brightness Adjusts the image brightness. Median value (0)
Contrast
Adjusts the difference between light and shade in the
images.Median value (0)
Color (Does not appear when the input source is RGB video.)
Adjusts the colour intensity for the images.Median value (0)
Tint (Does not appear when the input source is RGB video.)
Adjusts the image tint.Median value (0)
Sharpness Adjusts the image sharpness. Median value (0)
Adjust
+
-+
-+
-+
-+
-
Video
Audio
Setting
Users Logo
Advanced1
Color Mode Position
Brightness
Contrast
Color
Tint
Sharpness:
: :
: : 0
0
0
0 0
Select[Dynamic ]
[Menu]: Exit
Video Signal
Select
[ ]: Enter [ ]: Select
[Auto ]
About
Reset AllAdvanced2Effect
Reset
Execute
77 Using the Configuration Menu Functions Using the Configuration Menu Functions Color ModeCorrects the vividness of the image colour. The settings can be saved separately for each type of source (computer or video source). You can select from five different quality settings depending on the surroundings. Dynamic : Images are modulated and made fresher to emphasise brightness. Presentation : Brightness is emphasized. For presentations in bright rooms. Theatre : Movie images are optimised using natural tints. The black & white extension function operates so that differences in colour gradations (darkness and lightness of colours) are accentuated even for images that are very dark or very bright, to make them easier to view. Living Room :Brightness is emphasized. Ideal for playing video games in bright rooms. sRGB: Images conform to the sRGB standard. If set to sRGB, the colour temperature for the Color Adjustment command in the Advanced1 menu will be set to 6500K.Dynamic Video Signal(Selection is only possible when composite video/S-Video signals are being input and are selected) Selects the video signal format. Press the [Enter] button on the remote control or the [Auto/Enter] button on the projectors control panel and choose the setting. When set to Auto, the video signal format is selected automatically.Auto Reset Resets all adjustments values for the Video menu functions to their default settings. Press the [Enter] button on the remote control or the [Auto/Enter] button on the projectors control panel to reset. Select Reset All to reset all menu settings – including settings for the Video and Audio menus – to their default settings. p.89 - Sub-menu Function Default
78 Using the Configuration Menu Functions Using the Configuration Menu Functions Audio Menu Advanced2 + - Volume 15 Video Audio Setting Users Logo Advanced1 About Reset All : [Menu]: Exit [ ]: Enter [ ]: Select Reset Execute + - Treble 0 0 : + - Bass 0 0 : Effect Sub-menu Function Default Volume Adjusts the volume. 15 Treble Adjusts the intensity of the treble range. Median value (0) Bass Adjusts the intensity of the bass range. Median value (0) Reset Resets all adjustments values for the Audio menu functions to their default settings. Press the [Enter] button on the remote control or the [Auto/Enter] button on the projectors control panel to reset. Select Reset All to reset all menu settings – including settings for the Video and Audio menus – to their default settings. p.89- TIP The Audio menu settings are saved individually for each input signal source.
79 Using the Configuration Menu Functions Using the Configuration Menu Functions Effect Menu Set Video Audio Setting Users Logo Advanced1 Color Mode Pointer/Line1 Color: :[Menu]: Exit Pointer Speed : [ ]: Enter [ ]: Select About Reset AllAdvanced2Effect Zoom Rate :100%Color WidthSet Pointer/Line2 Set Pointer/Line3Zoom Rate :100% Zoom Rate:100%LMExecute : : Color Width : : Color Width H Reset Sub-menu Function Default Pointer/ Line1Sets the pointer or line that is displayed when the [Effect] button on the remote control is pressed once. Shape : Select the pointer shape from the following eight types. Zoom Rate : Select the display size for the pointer icon from 100% or 200%. Color : Select the colour of the straight and curved lines from eight colours. Width : Select the width of the straight and curved lines that are drawn when the pointer icon is moved from Thick, Medium or Thin.Shape: Zoom Rate: 100% Color: Light blue Width: Thick Pointer/ Line2Sets the pointer or line that is displayed when the [Effect] button on the remote control is pressed twice. The setting items and contents are the same as for Pointer/ Line1.Shape: Zoom Rate: 100% Color: Blue Width: Medium Pointer/ Line3Sets the pointer or line that is displayed when the [Effect] button on the remote control is pressed three times. The setting items and contents are the same as for Pointer/ Line1.Shape: Zoom Rate: 100% Color: Red Width: Thin Pointer SpeedSets the speed at which the pointer moves when the [ ] button is tilted. L: Low M: Medium H: HighM Reset Resets all adjustments values for the Effect menu functions to their default settings. Press the [Enter] button on the remote control or the [Auto/Enter] button on the projectors control panel to reset. Select Reset All to reset all menu settings – including settings for the Video and Audio menus – to their default settings. p.89-