Epson Projector Emp 81 User Manual

60
Using the Configuration Menu Functions
Reset
Resets all adjustment values for the Setting menu functions 
to their default settings.
Press the [Enter] button on the remote control or on the 
projectors control panel.
To return all settings such as the Image and Signal 
menu settings to their default values, selectReset All from 
the Reset menu.
 sp.65
-
Sub-menu
Function
Default 

61
Using the Configuration Menu Functions
The User’s Logo setting can not be adjusted if no 
signals are being input.
Extended Menu
Sub-menu
Function
Default
Display
This lets you make settings related to the projectors display.
Message:
Sets whether display of the following messages is turned 
ON or OFF.
 Signal name when the video signal is switched
 Colour mode name when the colour mode is switched
 When no image signals are being input
 When an incompatible signal is input
 When the air filter...

62
Using the Configuration Menu Functions
Projection
Sets the projection position for the projector.
 Front : Select when the projector is in front of the 
screen.
 Front/Ceiling : Select when the projector is in front of the 
screen and suspended from the ceiling.
 Rear : Select when the projector is behind the 
screen.
 Rear/Ceiling : Select when the projector is behind the 
screen and suspended from the ceiling.
Front
Operation
This lets you make settings related to projector operation.
Direct...

63
Using the Configuration Menu Functions
* EMP Monitor : Allows you to monitor multiple projectors on 
the network and control them all at once using functions 
such as turning the power on and off and switching input 
sources.
To use the EMP Monitor, an adapter and cable for conversion  
are required. The followings are available products. 
(As of May, 2004)
For details on the products, visit LANTRONIXs website.
Adapters:
UDS100, UDS200 (LANTRONIX) 
Cables:
For the UDS100
RS-232C cable (straight, mini...

64
Using the Configuration Menu Functions
The Info menu shows the setting details for the current 
image source.
The Lamp Hours item appears as 0H for 0–10 hours, 
and after that, it appears in units of 1 hour.
Computer/RGB Video/Component video
g
Composite video
g/ S-Video
g
Info Menu
Sub-menu
Function
Default
Lamp 
Hours
Displays the cumulative lamp operating time for both 
High Brightness and Low Brightness.
When the lamp warning period is reached, the display 
characters appear in red.
0H
Source...

65
Using the Configuration Menu Functions
Reset Menu
Sub-menu
Function
Default
Reset All
Resets all items in all menus to their default settings.
Press the [Enter] button on the remote control or on the 
projectors control panel.
To reset settings such as Image or Signal, select Reset 
from the respective sub menus.
The Computer1 Input, Computer2 Input, Video 
Signal, User’s Logo, Lamp Hours and Language 
settings will not be reset to their defaults. However, if 
Background Color is set to Logo or...

66
Using the Configuration Menu FunctionsUsing the Configuration Menus
The configuration menus can be operated using either the remote control or 
the projectors control panel.PROCEDURE
Press the [Menu] button.
The configuration menu appears.Select a menu item.
Tilt the [ ] button on the remote control up and down or press 
the [ ] and [ ] buttons on the projectors control panel to 
move to the item to be set.
Confirm the selection.
Press the [Enter] button to confirm the selection of a menu item.
1...

67
Using the Configuration Menu Functions
Select a sub-menu item.
Tilt the [ ] button on the remote control up and down or press 
the [ ] and [ ] buttons on the projectors control panel to 
move to the sub-item to be set, and then press the [Enter] 
button.
The items that are displayed in the Image menu, Signal 
menu and Info menu vary depending on the input source that 
is being projected.
Change the setting.
Tilt the [ ] button on the remote control or press the [ ], 
[ ], [ ] and [ ] buttons on the...

TroubleshootingThis chapter describes how to identify problems and what to do if a problem is found.Using the Help ..................................................... 69
Problems Solving................................................ 71
Abnormal ................................................................................... 71 Reading the Indicators........................................................ 71Power indicator lights red .......................................................... 71...

69
Using the HelpIf a problem occurs with the projector, the Help function uses on-screen 
displays to assist you in solving the problem. It uses a series of menus in a 
question and answer format.
PROCEDURE
Press the [Help] button.
The help menu will be displayed.Select a menu item.
Tilt the [ ] button on the remote control or press the [ ] and 
[ ] buttons on the projectors control panel to select an item.
Confirm the selection.
Press the [Enter] button to confirm the selection of a menu item.
1...