Epson Projector Emp 7900 User Manual

80
Using the Configuration Menu Functions Using the Configuration Menu Functions
Setting Menu
P in P Keystone
No-Signal Msg.OFFS-Video
MessageONOFFBlackBlue
A/V MuteLogo BlackBlue
Video
Audio
Setting
Users Logo
Advanced1:
:
:
:
:
[Menu]: Exit
[    ]: Enter [    ]: Select
Reset All About Advanced2 Effect
H/V-Keystone
Quick Corner
Adjust
Reset
Execute Sleep ModeONOFF
:
Computer Input
BNC Input
Video
Logo
Select [                     ]
Auto
[Auto              ]Select 
Sub-menu
Function
Default
Keystone...

81
Using the Configuration Menu Functions Using the Configuration Menu Functions
* If the Computer Input and BNC Input have been set to Auto, the projector detects an 
image source automatically depending on an input signal.Sub-menu
Function
Default
P in P
When using the P in P function, this selects whether the 
image signals that are projected into the sub-screen are 
Video or S-Video.
Video
No-Signal 
Msg.
Sets the message status and background colour at times 
such as when no video signal is being...

82
Using the Configuration Menu Functions Using the Configuration Menu Functions
Sub-menu
Function
Default
Sleep 
Mode
Sets the energy saving operation when no video signal is 
being input.
 When set to ON, projection stops automatically and after 
the cool-down
g period is finished, the projector changes 
to sleep mode (standby mode) if no operations are carried 
out for approximately 30 minutes while the No Signal. 
message is being displayed. (The   indicator lights 
orange.)
 Projection starts...

83
Using the Configuration Menu Functions Using the Configuration Menu Functions
Users Logo Menu
Execute
Video
Audio
Effect
Users Logo
Advanced1
About
Reset All
[    ]: Execute[Menu]: Exit
[    ]: Select
SettingAdvanced2
Sub-menu
Function
Default
Execute
Records a users logo.   p.131
 Press the [Enter] button on the remote control or the 
[Auto/Enter] button on the projectors control panel, and 
then follow the instructions that appear on the screen.
 A users logo cannot be recorded if the Users Logo...

84
Using the Configuration Menu Functions Using the Configuration Menu Functions
Advanced1 Menu
Standby Mode
:
Startup ScreenONOFF
:
Video
Audio
Setting
Users Logo
Advanced1
About
Reset All
Progressive
Color Adjustment
Color Temp.RGB
Rear Proj.LanguageSelect[English]ResetExecute
Adjust
ONOFF:
:
CeilingONOFF
:
[Menu]: Exit
[    ]: Enter [    ]: Select
EffectAdvanced2
Network ONNetwork OFF:OFFVideo
Film/Auto
Sub-menu
Function
Default
Startup 
Screen
Sets whether the startup screen is displayed or not.
To...

85
Using the Configuration Menu Functions Using the Configuration Menu Functions
Color 
Adjustment
Adjusts the colour temperature
g and intensity of each RGB 
(red, green, blue) colour for each input source.
Color Temp.: Lets you adjust bright colours within a range 
from reddish tinges to bluish tinges.
If the colour temperature is lower, colours 
appear reddish and colour tones appear 
softer.
If the colour temperature is higher, colours 
appear bluish and colour tones appear 
sharper.
Press the...

86
Using the Configuration Menu Functions Using the Configuration Menu Functions
Standby 
Mode
Set to Network ON to use network monitoring and 
control functions and the standby monitor out function 
while the projector is in standby mode.
To enable the new settings, turn the projectors power off 
and wait until the cool-down
g is finished.
* When set to Network ON, the Power indicator will flash 
orange and then remain orange after disconnecting the 
power plug and reinserting it into the electrical...

87
Using the Configuration Menu Functions Using the Configuration Menu Functions
Advanced2 Menu
Brightness ControlHighLow
:
Video
Audio
Setting
Users Logo
Advanced1
About
Reset All
Projector ID
NetworkReset
Execute
: 1
[Menu]: Exit
[    ]: Enter [    ]: Select
EffectAdvanced2
COM Port
BNC Sync Termination
:ONOFF:
Direct Power ON
ONOFF
:
Operation Lock
ONOFF
:
Set
Set
RS-232CUSB
Auto Setup
ONOFF
:
Sub-menu
Function
Default
Brightness 
Control
This lets you set the lamp brightness to one of two settings....

88
Using the Configuration Menu Functions Using the Configuration Menu Functions
Direct 
Power ON
When the projectors power cable is connected, projection 
starts without needing to press the [Power] button.
*When Direct Power ON is set to ON, turn the power 
off by pressing the [Power] button, then wait for the cool-down
g period to finish and then disconnect the power 
cable. If the power cable is left connected to the wall 
outlet when Direct Power ON is set to ON, the 
projector will turn on if a...

89
Using the Configuration Menu Functions Using the Configuration Menu Functions
 The About menu shows the setting details for the 
current input signal.
 The Lamp item appears as 0H for 0–10 hours, and 
after that it appears in units of 1 hour.Computer (Analogue RGB, Digital-RGB)/
Component Video
g/RGB Video
Video (Composite Video
g, S-Video
g)
About Menu
Video
Audio
Setting
Users Logo
Advanced1
About
Reset All
Frequency Source
V ---.---Hz Reset Lamp Timer
H ---.---kHz Lamp (High Brightness)0H
SYNC...