Epson Projector Emp 7900 User Manual
Here you can view all the pages of manual Epson Projector Emp 7900 User Manual. The Epson manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 101
![Page 101
100
Projector Monitoring and Control using a Network
The settings will then be applied, and the display will
return to the window that appeared in step 2. Click
[ ] to close EMP NetworkManager.
If an e-mail message with EPSON Projector in the subject line is sent to
the IP address
g that have been set as mail notification destinations, the
message is a notification message saying that there is a problem with the
projector.
The following information will be contained in the body of the message.
Line...](http://img.usermanuals.tech/thumb/23/89687/w300_epson-emp-7900-manual_d-100.png "Page 101
100
Projector Monitoring and Control using a Network
The settings will then be applied, and the display will
return to the window that appeared in step 2. Click
[ ] to close EMP NetworkManager.
If an e-mail message with EPSON Projector in the subject line is sent to
the IP address
g that have been set as mail notification destinations, the
message is a notification message saying that there is a problem with the
projector.
The following information will be contained in the body of the message.
Line...")
100 Projector Monitoring and Control using a Network The settings will then be applied, and the display will return to the window that appeared in step 2. Click [ ] to close EMP NetworkManager. If an e-mail message with EPSON Projector in the subject line is sent to the IP address g that have been set as mail notification destinations, the message is a notification message saying that there is a problem with the projector. The following information will be contained in the body of the message. Line...
Page 102
![Page 102
101
Projector Monitoring and Control using a Network
If the name of the projector that you would like to set up mail notification
for does not appear in the window, use the following procedure to
manually connect the projector.PROCEDURE
Start EMP NetworkManager.Double-click [Projector address selection] in the
projector list display area.
The following IP Address Setup window will be
displayed.
You should make the following settings when manually
connecting a projector.
Connecting Manually1...](http://img.usermanuals.tech/thumb/23/89687/w300_epson-emp-7900-manual_d-101.png "Page 102
101
Projector Monitoring and Control using a Network
If the name of the projector that you would like to set up mail notification
for does not appear in the window, use the following procedure to
manually connect the projector.PROCEDURE
Start EMP NetworkManager.Double-click [Projector address selection] in the
projector list display area.
The following IP Address Setup window will be
displayed.
You should make the following settings when manually
connecting a projector.
Connecting Manually1...")
101 Projector Monitoring and Control using a Network If the name of the projector that you would like to set up mail notification for does not appear in the window, use the following procedure to manually connect the projector.PROCEDURE Start EMP NetworkManager.Double-click [Projector address selection] in the projector list display area. The following IP Address Setup window will be displayed. You should make the following settings when manually connecting a projector. Connecting Manually1...
Page 103
![Page 103
102
Projector Monitoring and Control using a Network
A projector list that has already been recorded by EMP Monitor can also
be shared by EMP NetworkManager.PROCEDURE
Start EMP NetworkManager.The projectors that have been recorded will be
displayed in the projector list display area.Click [Import].
The file selection window will be displayed.
Select the registration file for EMP Monitor and then click
[Open]. A list of the projectors that have been registered by
EMP Monitor will be displayed in the...](http://img.usermanuals.tech/thumb/23/89687/w300_epson-emp-7900-manual_d-102.png "Page 103
102
Projector Monitoring and Control using a Network
A projector list that has already been recorded by EMP Monitor can also
be shared by EMP NetworkManager.PROCEDURE
Start EMP NetworkManager.The projectors that have been recorded will be
displayed in the projector list display area.Click [Import].
The file selection window will be displayed.
Select the registration file for EMP Monitor and then click
[Open]. A list of the projectors that have been registered by
EMP Monitor will be displayed in the...")
102 Projector Monitoring and Control using a Network A projector list that has already been recorded by EMP Monitor can also be shared by EMP NetworkManager.PROCEDURE Start EMP NetworkManager.The projectors that have been recorded will be displayed in the projector list display area.Click [Import]. The file selection window will be displayed. Select the registration file for EMP Monitor and then click [Open]. A list of the projectors that have been registered by EMP Monitor will be displayed in the...
Page 104
![Page 104
103
Projector Monitoring and Control using a Network
PROCEDURE
With Windows running, click [Start], point to
[Programs] (or [All Programs]), point to [EPSON
Projector] and then click [EMP Monitor].
EMP Monitor will start up.If EMP Monitor is being started up for the first time
after it was installed, or if you would like to register
additional projectors, click the [Register projector]
icon. If all projectors are already registered and you
do not want to add any new projectors, skip to step 8....](http://img.usermanuals.tech/thumb/23/89687/w300_epson-emp-7900-manual_d-103.png "Page 104
103
Projector Monitoring and Control using a Network
PROCEDURE
With Windows running, click [Start], point to
[Programs] (or [All Programs]), point to [EPSON
Projector] and then click [EMP Monitor].
EMP Monitor will start up.If EMP Monitor is being started up for the first time
after it was installed, or if you would like to register
additional projectors, click the [Register projector]
icon. If all projectors are already registered and you
do not want to add any new projectors, skip to step 8....")
103 Projector Monitoring and Control using a Network PROCEDURE With Windows running, click [Start], point to [Programs] (or [All Programs]), point to [EPSON Projector] and then click [EMP Monitor]. EMP Monitor will start up.If EMP Monitor is being started up for the first time after it was installed, or if you would like to register additional projectors, click the [Register projector] icon. If all projectors are already registered and you do not want to add any new projectors, skip to step 8....
Page 105
![Page 105
104
Projector Monitoring and Control using a Network
Select the projector to be monitored or controlled and
then click [Add].If there are other projectors that you would like to
monitor that need to be added, repeat step 4.
Once all new projectors to be monitored have been
added, click [Close].
The display will return to the Register projector window, and
the names of the added projectors will appear in the projector
list.Once all target projectors have been registered, click
[Close].
If there are...](http://img.usermanuals.tech/thumb/23/89687/w300_epson-emp-7900-manual_d-104.png "Page 105
104
Projector Monitoring and Control using a Network
Select the projector to be monitored or controlled and
then click [Add].If there are other projectors that you would like to
monitor that need to be added, repeat step 4.
Once all new projectors to be monitored have been
added, click [Close].
The display will return to the Register projector window, and
the names of the added projectors will appear in the projector
list.Once all target projectors have been registered, click
[Close].
If there are...")
104 Projector Monitoring and Control using a Network Select the projector to be monitored or controlled and then click [Add].If there are other projectors that you would like to monitor that need to be added, repeat step 4. Once all new projectors to be monitored have been added, click [Close]. The display will return to the Register projector window, and the names of the added projectors will appear in the projector list.Once all target projectors have been registered, click [Close]. If there are...
Page 106
105 Projector Monitoring and Control using a Network The statuses of the registered projectors will each be displayed. Once a projector has been registered, the status of the projector will be displayed automatically each time EMP Monitor is started from then on. The following table shows the display details. The projector information that is generated when a problem is detected is stored until EMP Monitor is closed. The EMP Monitor displays will not be updated automatically even if the projector...
Page 107
![Page 107
106
Projector Monitoring and Control using a Network
The power for all registered projectors can be turned
on and off at the same time, and the input signal for
all projectors can also be selected at the same time.
Select the projectors for which the operation is to be
carried out and then click the desired operation
button.
If you would like to select all projectors, click [Select All].
Furthermore, you can also use the same operations as selecting
files in Windows to select ranges of projectors;...](http://img.usermanuals.tech/thumb/23/89687/w300_epson-emp-7900-manual_d-106.png "Page 107
106
Projector Monitoring and Control using a Network
The power for all registered projectors can be turned
on and off at the same time, and the input signal for
all projectors can also be selected at the same time.
Select the projectors for which the operation is to be
carried out and then click the desired operation
button.
If you would like to select all projectors, click [Select All].
Furthermore, you can also use the same operations as selecting
files in Windows to select ranges of projectors;...")
106 Projector Monitoring and Control using a Network The power for all registered projectors can be turned on and off at the same time, and the input signal for all projectors can also be selected at the same time. Select the projectors for which the operation is to be carried out and then click the desired operation button. If you would like to select all projectors, click [Select All]. Furthermore, you can also use the same operations as selecting files in Windows to select ranges of projectors;...
Page 108
TroubleshootingThis chapter describes how to identify problems and what to do if a problem is found.Using the Help ................................................... 108 Problem Solving................................................ 110 Reading the Indicators...................................................... 110 When the Indicators Provide No Help ............................ 113 Problems relating to images .................................................... 114 Problems relating to...
Page 109
![Page 109
108
Using the HelpIf a problem occurs with the projector, the Help function uses on-screen
displays to assist you in solving the problem. It uses a series of menus in a
question and answer format.
PROCEDURE
Press the [Help] button on either the remote control
or the projectors control panel.
The help menu will be displayed.Select a menu item.
If using the remote control, tilt the [ ] button up or down to
select a menu item.
If using the projectors control panel, press the [ ] or [ ]
button to select...](http://img.usermanuals.tech/thumb/23/89687/w300_epson-emp-7900-manual_d-108.png "Page 109
108
Using the HelpIf a problem occurs with the projector, the Help function uses on-screen
displays to assist you in solving the problem. It uses a series of menus in a
question and answer format.
PROCEDURE
Press the [Help] button on either the remote control
or the projectors control panel.
The help menu will be displayed.Select a menu item.
If using the remote control, tilt the [ ] button up or down to
select a menu item.
If using the projectors control panel, press the [ ] or [ ]
button to select...")
108 Using the HelpIf a problem occurs with the projector, the Help function uses on-screen displays to assist you in solving the problem. It uses a series of menus in a question and answer format. PROCEDURE Press the [Help] button on either the remote control or the projectors control panel. The help menu will be displayed.Select a menu item. If using the remote control, tilt the [ ] button up or down to select a menu item. If using the projectors control panel, press the [ ] or [ ] button to select...
Page 110
![Page 110
109
Using the Help
Repeat steps 2 and 3 to proceed through the menu to
more detailed items.
The help menu is cleared when the [Help] button is pressed.
4
No image appears on the screen.
The image is not displayed fully on the screen.
(cut off/ too big/ too small/ partial)
The image colors dont look right.
The image is too dark.
The image is distorted. The image is unsteady.Help Menu
[ ]:
Enter
[ESC]:
Return
[ ]:
Select
[ ]:
Exit
TIP
If the Help function does not provide a solution to the...](http://img.usermanuals.tech/thumb/23/89687/w300_epson-emp-7900-manual_d-109.png "Page 110
109
Using the Help
Repeat steps 2 and 3 to proceed through the menu to
more detailed items.
The help menu is cleared when the [Help] button is pressed.
4
No image appears on the screen.
The image is not displayed fully on the screen.
(cut off/ too big/ too small/ partial)
The image colors dont look right.
The image is too dark.
The image is distorted. The image is unsteady.Help Menu
[ ]:
Enter
[ESC]:
Return
[ ]:
Select
[ ]:
Exit
TIP
If the Help function does not provide a solution to the...")
109 Using the Help Repeat steps 2 and 3 to proceed through the menu to more detailed items. The help menu is cleared when the [Help] button is pressed. 4 No image appears on the screen. The image is not displayed fully on the screen. (cut off/ too big/ too small/ partial) The image colors dont look right. The image is too dark. The image is distorted. The image is unsteady.Help Menu [ ]: Enter [ESC]: Return [ ]: Select [ ]: Exit TIP If the Help function does not provide a solution to the...