Epson Projector Emp 7300 User Manual

							Menu Options
n  n  n  n  n  n
51
Audio Menu 
The Audio menu enables you make adjustments related to 
audio. 
Reset Returns all Video Menu items to their factory defaults. 
Select this item and then press a Click button or the 
 button to display the confirmation screen. 
Next, select Yes and then press a Click button or the 
 button to reset the Video Menu items. If you 
change your mind, select No and then press a Click 
button or the  button to clear the confirmation 
screen without changing any settings.
Menu item Description
Volume Adjusts the volume level for the speakers and audio-
out terminal. Increase the audio volume to raise the 
volume, or decrease it to lower the volume.
Treble Adjusts the treble tone.
Bass Adjusts the bass tone.
3D Sound Adjusts sound effects from 1 to 6 value. Increasing 
number, the sound effects gets enhanced.
Reset Returns all Audio menu items to their initial factory 
defaults. Select this item and then press the Enter 
button (control panel) or either multi-purpose button 
(remote) to display the confirmation screen. 
Next, select Yes and then press the Enter button 
(control panel) or a multi-purpose button (remote) to 
reset the Audio menu. 
If you change your mind, select No and then press a 
multi- purpose button (remote) or the Enter button 
(control panel) to clear the confirmation screen without 
changing any settings. Menu item Description 
						

							Using the Projector Menus
  n  n  n  n
52
Options Menu
The Options menu enables you to adjust basic settings that 
normally do not need changing.
Menu item Description
Prompt Temporarily displays a prompt on the projector screen 
to identify which source (computer or video) is 
providing the image.
Color Temp. Adjusts the whiteness of the screen. The H setting 
provides a cold white, M standard white, L a warm 
white, and U sets sub-brightness R, B. 
Selecting the User item and pressing a Click button or 
the  button displays a screen for more precise 
color temperature setting. Use the pointing button or 
the  and  buttons to select the color you 
want to adjust, and then use the pointing button of the 
 and  buttons to change the selected 
value. A high color temperature value enhances the 
selected color within the overall image, while a lower 
value weakens the color. Press a Click button or the 
 button to clear the setting screen and return to 
the Option Menu.
Rear Proj. Mirrors the projected images horizontally (left-right).
Selecting ON turns mirroring on, while OFF turns it off 
(for a normal image). Turn this option on when 
projecting from behind onto a transparent screen being 
viewed from the opposite side.
Ceiling Mirrors the projected images vertically (top-bottom) 
and horizontally (left-right). Selecting ON turns 
mirroring on, while OFF turns it off (for a normal 
image). Turn this option on when hanging the projector 
upside-down from the ceiling.
Blank Selects what should be projected when the projector’s 
Blank button is pressed to blank the screen. You can 
select either a black screen, a blue screen or a user 
logo. A user logo can be created using the projector 
software that comes with the projector. 
						

							Menu Options
n  n  n  n  n  n
53 View Change Specifies the view change to use when the input 
source is changed. 
OFF: No visual effects, simply cut to new source.
Diagonal : Original source screen shrinks from upper 
left to lower right, and new source screen 
expands from upper left to lower right.
Left 
® Right : Original source screen shrinks from left 
to right, and new source screen 
expands from left to right.
Fade : Original source screen shrinks from outside in, 
and new source screen expands from inside 
out.
Language Selects the menu language in the sequence: 
Japanese, English, German, French, Italian, Spanish 
and Portuguese.
Mouse /COM Locks and unlocks the Mouse/Com port.
Select 1 to assign the wireless mouse control to the 
computer connected to the Mouse/Com 1 port. The 
wireless mouse controls the computer connected to 
Mouse/Com 1 only if the input source is switched to 
Computer 2.
Select 2 to assign the wireless mouse control to the 
computer connected to the Mouse/Com 2 port.
Selecting 1
®2 tells the projector to automatically 
switch wireless mouse control whenever the input 
source computer is changed.
BNC Specifies input image signal mode. User can select 
either RGB or R-Y,Y,B-Y.
Reset Returns all Option Menu items to their factory defaults.
Select this item and then press a Click button or the 
 button to display the confirmation screen. 
Next, select Yes and then press a Click button or the 
 button to reset the Option Menu items. If you 
change your mind, select No and then press a Clock 
button of the  button to clear the confirmation 
screen without changing any settings. Menu item Description 
						

							Using the Projector Menus
  n  n  n  n
54
Custom Menu 
The Custom menu allows you to select special features such as 
zoom, preview, or strobe effects. Unlike the other menus, 
which use the Enter button to select a menu option, the 
Custom menu requires that you use the Custom button to 
select a Custom menu option.
The Custom button is located on the lower part of the remote 
control. 
To open the Custom menu, press the top multi-purpose 
button or select CUSTOM from the Main menu. ZOOM is 
highlighted and the words PRESENT SET are displayed after 
it. Refer to the table below for a description of the various 
zoom functions.
To change PREVIEW or STROBE settings, select the 
function you want, then press the top multi-purpose button. 
The Custom menu functions are:
Menu item Function Description
Zoom Press the bottom multi-purpose button 
then check if the value next to the Zoom 
menu is New Set or Present Set. If the 
value is New Set, press the bottom multi-
purpose button to toggle the value.
Press the Custom button to access the 
Zoom function. An indicator appears in 
the lower right of the screen while the 
zoom function is on. Zoom remains on 
until you press the Custom button again.
The following remote control functions are 
available while the zoom function is on:
Zoom In Each press of the remote control’s bottom 
multi-purpose button zooms in on the 
center of the displayed image, enlarging it 
+0.25 times.  
						

							Menu Options
n  n  n  n  n  n
55 Zoom Out Each press of the remote control’s top 
multi-purpose button zooms out on the 
center of the displayed image, reducing it 
+0.25 times.
Zoom Screen 
ShiftPress the pointer button to zoom in on a 
portion of the enlarged display. You can 
move the image up, down, left, right, and 
diagonally to closely view any part of the 
display.
Preview Press the bottom multi-purpose button 
then check if the value next to the Preview 
menu is New Set or Present Set. If the 
value is New Set, press the bottom multi-
purpose button to toggle the value.
Press the Custom button to turn on the 
Preview function. The preview function 
remains on until you press the Custom 
button again, select an input source with 
the pointer button, or press the remote 
control’s bottom multi-purpose button.
Strobe Press the bottom multi-purpose button 
then check if the value next to the Strobe 
menu is New Set or Present Set. If the 
value is New Set, press the bottom multi-
purpose button to toggle the value.
Press the Custom button to turn on the 
strobe function. The strobe function 
remains on until you press the Custom 
button again. The screen is divided into 
four quadrants, each of which shows the 
image from the current input source. Menu item Function Description 
						

							Using the Projector Menus
  n  n  n  n
56Number of 
Frames, TimePress the top multi-purpose button while 
the strobe effect is running to display a 
screen specifying the number of frames 
flashed and the time interval between 
them. You can specify the number of 
frames as 4, 9, or 16, and the time interval 
from 0.1 to 1 second in 0.1 second 
increments.
Press the top multi-purpose button again 
to clear the setting screen. Menu item Function Description 
						

							Menu Options
n  n  n  n  n  n
57
About Menu
The About menu displays the following information about 
your projector.
RESET ALL Menu 
Executing this command resets the settings in all menus to 
their factory defaults.
While executing this command, the OSD menu disappears 
from a screen and RESET ALL will be flashing on the 
center of the screen.
Select this item and then press a Click button or the  
button to display the confirmation screen. 
Next, select Yes and then press a Click button or the  
button to reset all menu items.
If you change your mind, select No and then press a Click 
button or the  button to clear the confirmation screen 
without changing any settings. 
H/V Freq. Displays H/V frequency of the current computer.
COMPUTER2 / 
5BNCSwitches between computer2 and 5BNC.
LAMP Displays the number of hours the current projector 
lamp has been used. The color of this display turns red 
when the projector lamp is near the end of its normal 
life. When this happens, replace the projector lamp 
with a new one as soon as possible. 
						

							Using the Projector Menus
  n  n  n  n
58 
						

							  n     n        n     n     n    n     n     n    n    n     n     n      n      n      n
n  n  n  n  n  n
59
4
Using the Projector Software
The Link Set package includes materials necessary to use the 
ELP Link III V2.0 utility. This utility runs on your computer 
to control projector features and to configure buttons on the 
remote control. ELP Link III V2.0 has two functions related 
to your EPSON projector.  
						

							Using the Projector Software
  n  n  n  n
60
Presentation support function
The presentation support function allows you to perform real-
time presentation effectively by a remote control shipped with 
the projector. 
Projector setting function 
The projector setting function allows you to control the 
projector from your  computer. 
¨
Note: See the ELP Link III V2.0 demonstration included in the 
Projector Software CD-ROM. 
System requirements
To use the ELP Link III V2.0 utility and to look at the PDF 
User’s Guide and demonstration, the following system 
requirements must be met.