Home > Epson > Projector > Epson Projector Emp 703 User Manual

Epson Projector Emp 703 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Epson Projector Emp 703 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							 
    Connecting to a Computer 
    n  n  n  n  n  
    n
     
    15  3. Connect the small terminal of the Macintosh desktop 
    adapter to the other end of the computer cable.
    4. Connect the computer cable (with the Macintosh desktop 
    adapter attached) to the video-out port on your 
    Macintosh.  Connecting the Mouse Cables  If you want to use the remote control as a mouse, you need to 
    connect the USB mouse cable.
    Refer to this illustration while following the steps below.    
    USB mouse cable 
    						
    							 
      n  n  n  n 
    16  1. Connect one end of the projector’s USB mouse cable to 
    the USB Mouse port on the projector
    2. Disconnect your Macintosh’s mouse cable. Connect the 
    other end of the projector’s USB mouse cable to the 
    mouse port on your Macintosh.  Connecting the Audio Cable  1. If you will be using audio, connect one end of the audio 
    cable to the Audio In jack on the projector.   
    2. Connect the other end of the audio cable to the Audio 
    Out port on your computer.  
    Audio In jack
    audio cable 
    						
    							 
    Connecting to a Computer 
    n  n  n  n  n  
    n
     
    17  Connecting to a PowerBook   Your PowerBook must have video-out capability in order to 
    connect to the projector. 
    To connect the projector to your PowerBook, you need to:
    • Connect the computer cable
    • Connect the mouse cable (if you want to use the remote 
    control as a mouse)
    • Connect the audio cable (if you’ll be projecting with audio)
    Follow the steps in each section for the cables you need to 
    connect. Before beginning, turn off the projector and 
    computer if they are on.
      ¨  Note:   PowerBook configurations vary, so the location of your 
    computer’s ports may not match the illustrations. See your 
    PowerBook manual for the port locations if necessary.  Connecting the Computer Cable  First connect the computer cable. Refer to this illustration as 
    you follow the steps below.  
    Macintosh desktop 
    adapter Computer port
    computer cablevideo-out cable 
    						
    							 
      n  n  n  n 
    18  ¨  Note:   Some new PowerBooks may allow you to connect the 
    computer cable directly to the computer without using a 
    video-out cable. See your PowerBook manual for additional 
    information on connecting a computer cable.
      1. Connect one end of the computer cable to the projector’s 
    Computer port.
    2. Remove the small cover on the Macintosh desktop adapter 
    and set its DIP switches in accordance with the resolution 
    you want to use (such as 16-inch mode). See your 
    Macintosh documentation for instructions. 
    						
    							 
    Connecting to a Computer 
    n  n  n  n  n  
    n
     
    19  3. Connect the small terminal of the Macintosh desktop 
    adapter to the other end of the computer cable.
    4. Connect the computer cable (with the optional Macintosh 
    desktop adapter) to the video-out port on the PowerBook. 
    If a video-out cable was provided with your PowerBook, 
    connect the smaller end of the video-out cable to the video-
    out port on the back of the PowerBook. Connect the other 
    end to the Macintosh desktop adapter on the end of the 
    computer cable. 
    						
    							 
      n  n  n  n 
    20  Connecting the Mouse Cables  If you want to use the remote control as a mouse, you need to 
    connect the USB mouse cable.
    Refer to this illustration while following the steps below. 
    1. Connect one end of the projector’s USB mouse cable to 
    the USB Mouse port on the projector.
    USB mouse cable 
    						
    							 
    Connecting to a Computer 
    n  n  n  n  n  
    n
     
    21  2. Connect the other end of the USB mouse cable to the 
    mouse port on the back of the PowerBook.  Connecting the Audio Cable  1. If you will be using audio, connect one end of the audio 
    cable to the Audio In jack on the projector. 
    2. Connect the other end of the audio cable to the audio-out 
    port on your PowerBook. 
    ¨
    Note: After you turn on the projector and computer, you’ll need 
    to choose Mirroring in the Display Control Panel if you set up 
    your configuration to display on the LCD screen as well as the 
    projector screen.
    Audio In jack
    audio cable 
    						
    							  n  n  n  n
    22
    Connecting to a Video Source
    You can connect a VCR, a camcorder, a laser disc player, 
    DVD player, or any other compatible video image source to 
    your projector.
    The projector can receive composite video or S-Video. Your 
    equipment has composite video if your video source has a 
    one-pin RCA video jack. Your equipment has S-Video if your 
    video source has a four-pin (mini-DIN) video jack.
    ¨
    Note: The projector is not compatible with a cable TV-style F 
    connector.
    You can connect the projector to an S-Video source and a 
    composite video source at the same time.
    The projector supports NTSC, PAL, and SECAM video 
    formats, and automatically detects and identifies the video 
    format. However, you can specify that a single broadcast 
    format be detected. (See Chapter 3.) Note that the projector 
    will then be able to detect only one type of video signal.
    The type of cable you use to connect the video source to the 
    projector depends on whether you have composite video or  
    S-Video. For composite video, use the RCA audio and RCA 
    video cable supplied with the projector. For S-Video, use the 
    S-Video cable supplied with your video device or obtain one 
    from your computer or video equipment dealer. 
    To connect a video source to the projector:
    1. Turn off the projector and video source if they are on.
    4 2
    3 1
    S-Video
    4-pin, mini-DINcomposite
    RCA 
    						
    							Connecting to a Video Source
    n  n  n  n  n  n
    23
    2. If your video source uses a small, round, one-prong 
    composite (RCA) video connector, you’ll need the RCA 
    video cable that comes with the projector. If your video 
    source uses a large, round, four-prong S-Video connector, 
    you will need to purchase the appropriate cable or use the 
    cable that came with your video source.
    3. For Composite Video, connect the yellow RCA plug on 
    one end of the RCA video cable to the projector’s Video 
    jack. Connect the other yellow RCA plug to the video-out 
    jack of your video source. 
    4. Connect the RCA audio cable to the Audio jacks of the 
    projector: insert the white plug into the L jack and the red 
    plug into the R jack. Connect the plug at the other end of 
    the RCA audio cable to the audio output jacks of the 
    video source. 
    5. For S-Video, insert one end of an S-Video cable into the 
    projector’s S-Video connector. Insert the other end into 
    the S-video out jack of your video source.
    RCA video cable RCA audio cable 
    						
    							  n  n  n  n
    24
    6. Connect the RCA audio cable to the Audio jacks of the 
    projector: insert the white plug into the L jack and the red 
    plug into the R jack. Connect the plug at the other end of 
    the RCA audio cable to the audio output jack of the video 
    source.
    S-Video connector
    S-Video cable 
    						
    All Epson manuals Comments (0)

    Related Manuals for Epson Projector Emp 703 User Manual