Epson Projector Emp 70 User Manual

50
5.4 Effect Menu
Displaying Menus
Press the Menu button, use the Enter button to select Effect from the top 
menu displayed, and press the Enter button to move to a submenu.
Settings
MenuContent
Cursor/Stamp Make detailed settings for the cursor/stamp function assigned to the 
remote control Effect1 button.
Shape : Select the shape of the cursor/stamp.
Zoom Rate : Select the display zoom factor for the cursor/stamp.
Horizontal Bar Make detailed settings for the horizontal bar function assigned to the...

51
5.5 Setting Menu
Displaying Menus
Press the Menu button, use the Enter button to select Setting from the top 
menu displayed, and press the Enter button to move to a submenu.
Settings
MenuContent
Keystone If the screen is distorted in trapezoidal form, adjust it to normal display.
*You can also adjust the screen with the Keystone button on the 
projector.
A keystone correction reduces screen size.
The keystone correction is stored in memory.  You will need to 
readjust the image if the projection...

52
A/V Mute*
(See page 74)Temporarily eliminates video during a presentation in order to focus 
attention on the presenter or elsewhere.  Press the A/V Mute button to 
use this function.
Black : A black screen is displayed.
Blue : A blue screen is displayed.
Sleep Mode After sleep mode is activated, the projector enters standby mode when 
no signal is input from an external source for a continuous period of 30 
minutes.
ON : Sleep Mode active
OFF : Sleep Mode inactive
Reset Returns Setting menu settings...

53
5.6 Advanced Menu
Displaying Menus
Press the Menu button, use the Enter button to select Advanced from the top 
menu displayed, and press the Enter button to move to a submenu.
Settings
MenuContent
Language Select the menu language.
Select from Japanese, English, German, French, Italian, Spanish, 
Portuguese, Chinese and Korean.
Color Setting Use color temperature or RGB to create settings for the colors displayed 
on screen. 
Color Temp: Adjusts the color temperature of the video.  
Select Color Temp...

54
5.7 About Menu
Displaying Menus
Press the Menu button, use the Enter button to select About from the top 
menu displayed, and press the Enter button to move to a submenu.
Setting and Display Information
The settings information displayed in the About menu differs as shown below 
during video projection from a computer/component versus a video device.
D-Sub15: Computer/Component video  Video: Video image
: Display   : No display
MenuContentVideo Projection
D-Sub15Video
Lamp Displays cumulative lamp-on...

55
5.8 Reset All Menu
Displaying Menus
Press the Menu button, and use the Enter button to select Reset All from the 
top-level menu displayed.
Settings
MenuContent
Reset All Returns all menu settings to initial settings.
(Lamp and language settings excluded)
* Note that rear and invert settings will also be cleared by this 
operation.





56
Initial Settings List
Initial settings at product shipment are shown below.
Main Menu TitleSubmenu TitleInitial Settings
Video (Computer/
Component Video)Position Central value
Tracking Dependent on the connected signal
Sync. 0
Brightness
Central value Contrast
Sharpness
Gamma Normal
Input Signal RGB
Auto Setup ON
Aspect Ratio 4:3
Video (Video) Position
Central value Brightness
Contrast
Color
Tint
Sharpness
Gamma Normal
Mode Auto
Aspect Ratio 4:3
Audio Volume
Central value
Tone
Audio Input Auto
Effect...

57
6Troubleshooting
6.1 Possible Failures............................................ 58
6.2 When Indicators Do Not Help....................... 60





58
6.1 Possible Failures
If you think your projector may have failed, first check the indicators on the 
unit.
Your projector includes an operation display indicator and a problem/alarm 
display indicator which provide information on projector status.
Operation Display Indicator 
Indicator 
StatusCauseRemedy or StatusSee 
Page
Steady 
orangeStandby 
status(Not abnormal)
Press the Power button to begin projection.28
Flashing 
orangeCool-down 
in progress(Not abnormal)
Please wait.
Cool-down* time takes...

59
Problem and Alarm Display Indicator 
Point:
 If the indicator is normal but you experience problems with video projection, refer to 
When Indicators Do Not Help on the following page.
 If the indicator display status is not shown in this table, consult your vendor.
Indicator 
StatusCauseRemedy or StatusSee 
Page
Steady red High 
internal 
temperatureThe usage temperature range of the projector is 
5°C–35°C, and the projector should be used in this 
range.77
Place the projector in a well-ventilated...