Epson Projector Emp 70 User Manual

40
4.2 Enlarging an Image
The remote control included lets you enlarge portions of an image.
1.Press the E-Zoom button on the remote 
control to enlarge or reduce the display on 
screen.
(The Esc button releases this feature.)
Point:
24-step partial enlargement and reduction by 
factors of 1x-4x is available.
2.Push the Enter button in any direction to 
scroll in that direction.
Reduction Enlargement
Magnification factor is displayed.
Push up
Push downPush right Push left





41
4.3 Adjusting Image Size
The Wide/Tele button on the projector allows you to adjust the size of images.
1.When you press the right side of the button 
(Tele), images are reduced.
2.When you press the left side of the button 
(Wide), images are enlarged.
Point:
 The enlargement/reduction range that the Tele 
and Wide buttons provide is from 0.8x to 1.0x 
in 32 steps.
 This function is active until the Reset All menu 
is executed (see page 55).





42
4.4 Adding Image Effects
Using the Effect1 and Effect2 buttons, you can add effects to images during 
presentation (to cancel this function, press the Esc button).
For effects settings, see 5.4 Effect Menu (page 50).
Cursor/Stamp
This effect displays a cursor on the screen and freezes it at a desired location.
1.Press the Effect1 button to display a cursor.
2.Use the Enter button to move the cursor to a 
desired location.
3.Press the Enter button, and the cursor 
position is displayed as a stamp....

43
4.5 Freezing and Deleting Images
Freezing a Moving Image (Remote Control Only)
You can freeze a moving image (video or other image).
1.Press the Freeze button on the remote 
control.
(To release the freeze, press the Freeze 
button again.)
Muting Images and Sound (Remote Control Only)
You can temporarily mute images and sound and project a black or blue image.
1.Press the A/V Mute button on the remote 
control.
(To cancel the muting feature, press the A/V 
Mute button or another button.)
Point:
Using...

44
4.6 Displaying Help Screens
You can display topic-specific help on screen for solving problems.  Use this 
function when problems occur.
1.Press the Help button to start the help 
function.
(Press the Help button again to cancel this 
function.)
Point:
If you cannot solve your problem using the Help 
function, consult the Troubleshooting section 
in this manual (see page 57).
2.Use the Select button on the projector to 
select a topic (on the remote control, use the 
Enter button).
3.Press the Enter...

45
5
5.1 Learning Basic Operations ............................ 46
5.2 Video Menu................................................... 47
5.3 Audio Menu .................................................. 49
5.4 Effect Menu................................................... 50
5.5 Setting Menu ................................................. 51
5.6 Advanced Menu ............................................ 53
5.7 About Menu .................................................. 54
5.8 Reset All Menu...

46
5.1 Learning Basic Operations
This section presents the basic functions available in menus.
For functions in each menu, access the guide available under each menu.
[Explanation of symbols]
[Opening and Closing Menus]
Press the Menu button to display the top menu.
To close this menu, press the Menu button again.
When the Menu button is pressed to close the top menu, the status at close 
will be maintained.
[Menu Selection]
Push the Enter button to the upper or 
lower side to move the menu up or 
down....

47
5.2 Video Menu
Displaying Menus
Press the Menu button, use the Enter button to select Video from the top 
menu displayed, and press the Enter button to move to a submenu.
Point:
 When there is no video signal from a computer or component video device, the 
Video menu is not available for settings.
 When there is no video signal from a video device, only the Mode menu is available 
for settings.
Settings
Video menu elements to be set differ as follows when projecting computer/
component video versus...

48
D-Sub15: Computer/Component video  Video: Video image
: setting available   : setting not available
MenuContentVideo Projection
D-Sub15Video
Brightness Adjusts image brightness.
+: Brightens image.
- : Darkens image.
Contrast Adjusts difference in color brightness/darkness.
+: Increases difference in color brightness/
darkness.
- : Decreases difference in color brightness/
darkness.
Color Adjusts color depth.
+: Deepens color.
- : Lightens color.
Tint Adjusts tint.
+: Strengthens red.
- : Strengthens...

49
5.3 Audio Menu
Displaying Menus
Press the Menu button, use the Enter button to select Audio from the top 
menu displayed, and press the Enter button to move to a submenu.
Settings
MenuContent
Volume Adjusts the volume of sound output from the projector.
+: Increases volume.
- : Decreases volume.
Tone Adjusts the tone of sound output from the projector.
+: Increases treble.
- : Decreases treble.
Audio Input Select an audio input destination.
(When the input signal is a component video signal, select...