Epson Projector Emp 62 User Manual
Have a look at the manual Epson Projector Emp 62 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 16
11
Part Names and FunctionsRemote Control
The following explains the functions shown in the illustration of the EMP-82/62 remote control.
If you position the over the button icon or button name, a description of that button will appear.•[Video] button sp.18•[S-Video] button sp.18
•Numeric buttons sp.26•Remote control light-emitting area sp.i
•[A/V Mute] button sp.20•[E-Zoom] button ( ) ( ) sp.22•[Enter] button sp.24 , p.32•[Esc] button sp.24 , p.32•[Auto] button sp.13
•[Menu] button...](http://img.usermanuals.tech/thumb/23/89731/w64_epson-emp-62-manual_d-15.png "Page 16
11
Part Names and FunctionsRemote Control
The following explains the functions shown in the illustration of the EMP-82/62 remote control.
If you position the over the button icon or button name, a description of that button will appear.•[Video] button sp.18•[S-Video] button sp.18
•Numeric buttons sp.26•Remote control light-emitting area sp.i
•[A/V Mute] button sp.20•[E-Zoom] button ( ) ( ) sp.22•[Enter] button sp.24 , p.32•[Esc] button sp.24 , p.32•[Auto] button sp.13
•[Menu] button...")
![Page 18
13
Adjusting the Image QualityAdjusting Computer Images and RGB Video Images
Automatic setup detects analogue RGB signals coming from a connected
computer, and automatically adjusts these signals so that the optimum
images can be obtained.
Automatic setup involves adjustment of the following three items:
Tracking
g, Position and Sync (synchronisation)
g.
If Auto Setup in the Signal menu is set to Off, automatic setup is not
carried out. In this case, press the [Auto] button on the remote control or...](http://img.usermanuals.tech/thumb/23/89731/w64_epson-emp-62-manual_d-17.png "Page 18
13
Adjusting the Image QualityAdjusting Computer Images and RGB Video Images
Automatic setup detects analogue RGB signals coming from a connected
computer, and automatically adjusts these signals so that the optimum
images can be obtained.
Automatic setup involves adjustment of the following three items:
Tracking
g, Position and Sync (synchronisation)
g.
If Auto Setup in the Signal menu is set to Off, automatic setup is not
carried out. In this case, press the [Auto] button on the remote control or...")
![Page 19
14
Adjusting the Image QualityB
Adjust the tracking until the vertical stripes disappear
from the image.
The tracking value increases or decreases each time a button is
pressed.
C
Press the [Menu] button to exit the configuration
menu.
If flickering, fuzziness or interference appear in
computer or RGB video images, and this cannot
be fixed using automatic setup, you will need to
adjust the Sync (synchronisation)
g manually
using the following procedure.
PROCEDUREA
Select Signal from the...](http://img.usermanuals.tech/thumb/23/89731/w64_epson-emp-62-manual_d-18.png "Page 19
14
Adjusting the Image QualityB
Adjust the tracking until the vertical stripes disappear
from the image.
The tracking value increases or decreases each time a button is
pressed.
C
Press the [Menu] button to exit the configuration
menu.
If flickering, fuzziness or interference appear in
computer or RGB video images, and this cannot
be fixed using automatic setup, you will need to
adjust the Sync (synchronisation)
g manually
using the following procedure.
PROCEDUREA
Select Signal from the...")
![Page 20
15
Adjusting the Image QualityB
Adjust the synchronization until the horizontal noise
disappears from the image.
The sync value increases or decreases each time a button is
pressed.
C
Press the [Menu] button to exit the configuration
menu.
Selecting the Projection Quality (Color Mode)
The following seven preset colour modes are available for use depending
on the characteristics of the images that are being projected. You can easily
obtain the optimum image quality simply by selecting the colour mode...](http://img.usermanuals.tech/thumb/23/89731/w64_epson-emp-62-manual_d-19.png "Page 20
15
Adjusting the Image QualityB
Adjust the synchronization until the horizontal noise
disappears from the image.
The sync value increases or decreases each time a button is
pressed.
C
Press the [Menu] button to exit the configuration
menu.
Selecting the Projection Quality (Color Mode)
The following seven preset colour modes are available for use depending
on the characteristics of the images that are being projected. You can easily
obtain the optimum image quality simply by selecting the colour mode...")
![Page 22
17
Adjusting the VolumeThe volume of the projectors built-in speaker can be adjusted as follows.
PROCEDUREWhen the button is pressed to the [ ] side, the volume increases,
and when it is pressed to the [ ] side, the volume decreases.
The volume gauge appears on the screen when the volume is being
adjusted.
If the value displayed in the gauge on the screen stops
changing when the volume is being adjusted, it
indicates that the limit for volume adjustment has been
reached.
The volume can also be...](http://img.usermanuals.tech/thumb/23/89731/w64_epson-emp-62-manual_d-21.png "Page 22
17
Adjusting the VolumeThe volume of the projectors built-in speaker can be adjusted as follows.
PROCEDUREWhen the button is pressed to the [ ] side, the volume increases,
and when it is pressed to the [ ] side, the volume decreases.
The volume gauge appears on the screen when the volume is being
adjusted.
If the value displayed in the gauge on the screen stops
changing when the volume is being adjusted, it
indicates that the limit for volume adjustment has been
reached.
The volume can also be...")
![Page 23
18
Changing the Projected Image (Source Search)Automatically Detect Incoming Signals and Change the Projected Image (Source Search)
The picture signal input from the connected equipment is automatically
detected and projected.PROCEDUREA
Perform the Source Search.
B
The screen being searched for is displayed, and then
the image is projected.
When two or more pieces of equipment are connected, press the
[Source Search] button until the target image is projected.
Changing Directly from the Remote...](http://img.usermanuals.tech/thumb/23/89731/w64_epson-emp-62-manual_d-22.png "Page 23
18
Changing the Projected Image (Source Search)Automatically Detect Incoming Signals and Change the Projected Image (Source Search)
The picture signal input from the connected equipment is automatically
detected and projected.PROCEDUREA
Perform the Source Search.
B
The screen being searched for is displayed, and then
the image is projected.
When two or more pieces of equipment are connected, press the
[Source Search] button until the target image is projected.
Changing Directly from the Remote...")
![Page 25
20
Functions for Enhancing ProjectionPausing the Image and Sound (A/V Mute)
For example, this can be used if you want to pause the projection for a
moment and focus the audience’s attention on what you are saying. Or if
you are making a computer presentation and you do not want to show
details, such as selecting different files.PROCEDUREYou can turn this function on or off by pressing the [A/V Mute] button.
Freezing the Image (Freeze)
The source image continues to project even when the screen is...](http://img.usermanuals.tech/thumb/23/89731/w64_epson-emp-62-manual_d-24.png "Page 25
20
Functions for Enhancing ProjectionPausing the Image and Sound (A/V Mute)
For example, this can be used if you want to pause the projection for a
moment and focus the audience’s attention on what you are saying. Or if
you are making a computer presentation and you do not want to show
details, such as selecting different files.PROCEDUREYou can turn this function on or off by pressing the [A/V Mute] button.
Freezing the Image (Freeze)
The source image continues to project even when the screen is...")
16 Adjusting the Image Quality PROCEDUREEach time you press the button, the colour modes change in the following order. The current setting appears in the top-right corner of the screen each time the colour mode is changed. While the colour mode name is displayed on the screen, it does not change to the next colour mode setting unless you press the button. The colour mode can also be set using the Color Mode command in the Image menu. sp.33Remote control
17 Adjusting the VolumeThe volume of the projectors built-in speaker can be adjusted as follows. PROCEDUREWhen the button is pressed to the [ ] side, the volume increases, and when it is pressed to the [ ] side, the volume decreases. The volume gauge appears on the screen when the volume is being adjusted. If the value displayed in the gauge on the screen stops changing when the volume is being adjusted, it indicates that the limit for volume adjustment has been reached. The volume can also be adjusted using the configuration menu. sp.36 Using the remote control Using the control panel
18 Changing the Projected Image (Source Search)Automatically Detect Incoming Signals and Change the Projected Image (Source Search) The picture signal input from the connected equipment is automatically detected and projected.PROCEDUREA Perform the Source Search. B The screen being searched for is displayed, and then the image is projected. When two or more pieces of equipment are connected, press the [Source Search] button until the target image is projected. Changing Directly from the Remote Control You can use the remote control to change directly to the target input source. Computer S-Video Video Skip When using the EMP-X3 Using the Remote Control Using the Control Panel When your video equipment is connected, start playback. The following screen is displayed when only the picture signal projected now is input, or when no picture signal is input. You can choose the input source from this screen. When using the EMP-X3 Changes to the image from the Computer port. Changes to the image from the S-Video port.Changes to the image from the Video port. Remote Control
Useful FunctionsThis chapter explains useful functions for giving presentations and so on, and the security functions.Functions for Enhancing Projection ................. 20 Pausing the Image and Sound (A/V Mute) .......................20 Freezing the Image (Freeze) ...............................................20 Changing the Aspect Ratio (Resizing) ...............................21 Displaying the Pointer (Pointer) ........................................ 21 Enlarging Part of the Image (E-Zoom) .............................22 Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse).................................................... 23 Security functions ............................................... 26 Preventing theft (Password Protect) ................................. 26 When Password Protect is Enabled ............................................26 Setting Password Protect ............................................................27 Operation Button Lock Function ...................................... 29
20 Functions for Enhancing ProjectionPausing the Image and Sound (A/V Mute) For example, this can be used if you want to pause the projection for a moment and focus the audience’s attention on what you are saying. Or if you are making a computer presentation and you do not want to show details, such as selecting different files.PROCEDUREYou can turn this function on or off by pressing the [A/V Mute] button. Freezing the Image (Freeze) The source image continues to project even when the screen is frozen. You can still perform operations such as changing files, without projecting any images.PROCEDUREYou can turn this function on or off by pressing the [Freeze] button. If you use this function when projecting moving images, the images and sound will still continue to be played back by the source, and you cannot return to the point where the A/V mute function was activated. The screen display in A/V mute can be chosen from black, blue, or a logo by using Extended -Display - A/V Mute in the configuration menu.Remote control Sound does not stop. Even though the image on the screen is frozen, the image source continues to project, and so it is not possible to resume projection from the point where it was paused. Pressing the [Freeze] button also clears configuration menu displays and help messages. The freeze function still works while the E-Zoom function is being used. Remote control
21 Functions for Enhancing ProjectionChanging the Aspect Ratio (Resizing) This function changes the aspect ratio g of images from 4:3 to 16:9 when component video g, S-Video g, or composite video g images are being projected. Images which have been recorded in digital video or onto DVDs can be viewed in 16:9 wide-screen format. PROCEDUREThe display is changed whenever you press the button. Displaying the Pointer (Pointer) This allows you to move a pointer icon on the projected image, and helps you draw attention to the area you are talking about.PROCEDUREA Display the pointer. Each time you press the button the pointer appears or disappears. You can also make this setting using the Resize command in the Signal menu. When images in squeeze mode are projected at 16:9 When images in Squeeze mode g are projected at 4:3 Remote control Remote control
22 Functions for Enhancing ProjectionB Move the pointer icon. Enlarging Part of the Image (E-Zoom) This is useful when you want to see images in greater detail, such as graphs and details in a table.PROCEDUREA Start E-Zoom. You can use the Pointer Shape command in the Settings menu to change the shape of the pointer to one of three different shapes. sp.36 Pointer icon Remote control Remote control
23 Functions for Enhancing ProjectionB Move the cross to the area of the image that is to be enlarged or reduced. C Enlarge. You can reduce the enlarged image by pressing the [-] button. To cancel the E-Zoom, press the [Esc] button. Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse) If the USB terminal of a computer and the USB terminal on the back of this projector are connected by a commercially available USB A-B cable *, you can use the projector’s remote control like a wireless mouse to control the computer’s mouse pointer. *USB cable included with the EMP-82/62. The enlargement ratio will appear on the screen. You can scroll the screen by tilting the [ ] button. The selected area can be enlarged to between 1- 4 times, in 25 incremental steps. Remote control CrossRemote control Computer Windows 98/2000/Me/XP Home Edition/XP ProfessionalMacintosh (OS 8.6–9.2/10.0–10.3) USB cableTo USB port To USB port
24 Functions for Enhancing Projection Once the connection has been made, the mouse pointer can be operated as follows. The USB cable can only be connected to computers with a standard USB interface. If using a computer which is running Windows, the computer must have had a full version of Windows 98/2000/Me/XP Home Edition/XP Professional installed. If the computer is running a version of Windows 98/2000/Me/XP Home Edition/XP Professional that has been upgraded from an earlier version of Windows, correct operation cannot be guaranteed. It may not be possible to use the mouse function under some versions of both the Windows and Macintosh operating systems. Some computer settings may have to be changed in order for the mouse function to be used. Consult the documentation for the computer for further details. Moving the mouse pointer Mouse clicks Drag and drop This is useful for displaying the previous or next slide in a PowerPoint slideshow. Double-click: Press twice in rapid succession. Left click Right click 1. Hold down the [Enter] button and tilt and drag the [ ] button. 2. Release the [Enter] button to drop at the desired location. To previous slide To next slide
25 Functions for Enhancing Projection If the mouse button settings are set to reverse on the computer, the operation of the remote control buttons will also be reversed. The wireless mouse function cannot be used while the following functions are being used. · While a configuration menu is being displayed · While a help menu is being displayed · While the E-Zoom function is being used · While a users logo is being captured · Pointer function · While adjusting sound volume