Epson Projector Emp 53 User Manual

40
Functions for Enhancing ProjectionThis section describes the various useful functions that can be used to enhance 
presentations.A/V Mute
This function momentarily pauses the image and sound.
For example, it can be used when you do not want to show details of 
operations such as selecting different files while computer images are 
being projected.
However, if you use this function when projecting moving images, the 
images and sound will still continue to be played back by the source, and 
you cannot...

41
Functions for Enhancing Projection Functions for Enhancing ProjectionFreeze
This function pauses only the projected images. The sound keeps playing 
without pausing.
The image source will still be playing back the images even while 
projection is paused, and so it will not be possible to resume projection 
from the point where it was paused.PROCEDUREPress the [Freeze] button on the remote control.
The images will then be paused.
To continue projecting the images, either press the [Freeze] button...

42
Functions for Enhancing Projection Functions for Enhancing ProjectionWide-screen Projection of Images from Video Equipment (Changing the Aspect Ratio)
This function changes the aspect ratio
 of images from 4:3 to 16:9 when 
component video images (YCbCr and YPbPr) or video images (S-Video or 
composite video) are being projected. Images which have been recorded in 
digital video or onto DVDs can be viewed in 16:9 wide-screen format. 
PROCEDURE
Press the [Menu] button on the remote control, and 
then...

43
Functions for Enhancing Projection Functions for Enhancing ProjectionE-ZoomThis function lets you enlarge and reduce a part of projected images such as 
graphs and tables.
PROCEDURE
Press the [E-Zoom  ] button on the remote control.
A cursor (cross) indicating the centre point for the area to be 
enlarged will appear on the screen.Move the cross to the area of the image that is to be 
enlarged or reduced.
Press the [ ], [ ], [ ] and [ ] buttons on the remote control to 
move the cross.
When [ ] is...

44
Using the Configuration Menu FunctionsThe configuration menus can be used to carry out a variety of settings and adjustments.
The menus have a hierarchical structure, with a main menu that is divided into sub-menus, which are further divided into other sub-menus.
The remote control is used to operate the menus. Refer to Using the Configuration Menus 
 p.57 for details on using the menus.
Video
Audio
Setting
Users Logo
Advanced
About
Reset All
Color Mode Position
Tracking
Sync .
Brightness
Contrast...

45
Using the Configuration Menu Functions Using the Configuration Menu FunctionsList of Functions
 The functions in the Video menu apart from Input 
Signal, Auto Setup and Video Signal cannot be 
adjusted while no image signal is being input.
 The functions which appear in the Video menu will 
change depending on the type of input source being used 
for the image signal. Functions which are not available in 
the Video menu for a particular input source cannot be 
adjusted.Computer (Analogue-RGB)/RGB...

46
Using the Configuration Menu Functions Using the Configuration Menu Functions
Input 
SignalSelects the input signal in accordance with the source being 
used.
 When projecting computer images, select Computer.Depends on 
connection
Auto Setup Selects whether the automatic adjustment function for 
automatically optimising images when the input source is 
changed is turned ON or OFF.ON
Reset Resets all adjustment values for the Video menu functions 
except for the Input Signal setting to their default...

47
Using the Configuration Menu Functions Using the Configuration Menu Functions
Component (YCbCr
, YPbPr
)
Video (S-Video, Composite video)
Adjust
+
-+
-+
-+
-+
-
Video
Audio
Setting
Users Logo
Advanced
About    0
  0
    0
    0
Reset All    0
Color Mode Position
Brightness
Contrast
Color
Tint
Sharpness:
: :
: :
Select[Theatre        ]
[Menu]: Exit
:
:
Input SignalAspect Ratio
Reset
Execute4 : 316 : 9
:[Component Video (YCbCr)
Select
]
[    ]: Enter [    ]: Select
Adjust
+
-+
-+
-+
-+
-
Video
Audio...

48
Using the Configuration Menu Functions Using the Configuration Menu Functions
Input 
Signal (Adjustment is only possible when component video signals 
are being input.) 
Selects the input signal in accordance with the source being 
used.Depends on 
connection 
Video 
Signal (Adjustment is only possible when composite video/S-Video 
signals are being input.) 
Sets the video signal format.
 Press the [Enter] button, and choose the setting from the 
video signal format selection sub-menu which appears....

49
Using the Configuration Menu Functions Using the Configuration Menu Functions
Audio Menu
+
-
Volume
VolumeResetReset
ExecuteExecute
  10
Video
Audio
Setting
Users Logo
Advanced
About
Reset All
:: Audio InputAudio 1
Audio 2
[Menu]: Exit
[    ]: Enter [    ]: Select
Sub-menu
Function
Default
Volume Adjusts the volume. Median value 
(10)
Audio 
InputSelects the input source (port) for audio signals at the rear of 
the projector.
The default setting varies depending on the type of signal 
being input (for...