Epson Projector Emp 53 User Manual

20
Connecting to a Computer
Once the connection has been made, the mouse pointer can be operated as 
follows.
Moving the mouse pointer
Press the [ ], [ ], [ ] or [ ] button to 
move the mouse pointer in the direction 
of the button pressed. 
Left clickPress the [Enter] button.
If you press the [Enter] button twice in 
rapid succession, it has the effect of a 
double-click.
Right clickPress the [ESC] button.
Drag and dropWhile holding down the [Enter] button, 
press the [ ], [ ], [ ] or [ ] button to...

21
Connecting to a ComputerConnecting to an External Monitor
Images can be viewed on an external computer monitor at the same time 
they are being projected by the projector. Use the cable that is provided 
with the computer monitor to connect the Monitor Out port at the rear of 
the projector to the monitor.
Cable provided with monitorTo Monitor Out 
port (black) Monitor port
TIP
 Video images cannot be output to an external monitor.
 The setting gauge for keystone correction and the configuration...

22
Connecting to a Video SourceProjecting Composite Video
 Images
Use the accessory A/V cable to connect the video source to the Video port 
at the rear of the projector. 
Projecting S-Video
 Images
Use a S-Video cable (commercially-available) to connect the video source 
to the S-Video port at the rear of the projector.
CAUTION
When connecting the projector to other video sources, take the 
following precautions.
 Turn off the power for both the projector and the video source before 
connecting them....

23
Connecting to a Video SourceProjecting Component Video
 Images
Use the optional component video cable to connect the video source to the 
Computer/Component Video port at the rear of the projector. See 
Appendices: Optional Accessories 
 p.84
Projecting RGB Video Images
RGB video is used when RGB signals that have copy protection added are 
input and projected. Use the accessory computer cable to connect the video 
source to the Computer/Component Video port on the rear of the projector.
Component...

24
Connecting to a Video SourcePlaying Sound from the Video Equipment
The projector has a single built-in speaker with a maximum output of 1 W. 
You can output composite video and S-Video sound through the projectors 
built-in speaker by connecting the video equipments audio output port 
equipment to the Audio 2 port (RCA/monaural) at the rear of the projector 
using the A/V cable that is included with the projector. 
If you would like to output sound from a component video and RGB video 
that is being...

N
P
S
O
N
O
N
EP
SO
N
PS
O
N
E
PS
O
N
NN
O
N
E
P
SON
PS
O
N
E
PSO
N
EP
SON
EP
SON EP
SON
E
PSO
N
EPSO
N EPS
ON
E
PS
ON
SONEP
S
ON
EPS
ON
E
PS
ON
E
PSON
EPSO
N E
PSON
EPSO
N
EP
SO
N
EP
SON EP
SON
E
PSON
EPSO
N EPS
ON
EPS
O
N
EP
SO
N
EP
S
ON
ON
EPS
ON
EPS
ON EPS
ON
EP
SON
E
PSO
N E
PSON
E
PSO
N
EPS
O
N
EP
SON EP
SON
E
PSON
EPSO
N EPSO
N
EPS
O
N
EPS
ON
EP
SON
E
PSON
E
PSO
N
N
EP
S
O
N
E
PSON E
PSON
EPS
ON
EPSO
N EPS
ON
EP
SO
N
EPSO
N
E
PSON EPSO
N
EPS
ON
EP
SON EP
SON
EP
SO
N
E
PSO
N
EPSO
N
EPS
ON
EPS
ON
E...

26
Turning On the ProjectorTurn on the power to start projecting images.Connecting the Power Cable
PROCEDURE
Check that the power is turned off for the projector 
and all components connected to the projector.Connect the computer or other video source to the 
projector.  p.16, p.22Remove the lens cover.
Hook your finger under the top of the lens cover and pull to 
remove it.
Connect the accessory power cable to the projector.
Check that the power cable connector is facing the same way as 
the power inlet...

27
Turning On the ProjectorTurning On the Power and Projecting Images
PROCEDURE
Check that the Power indicator has stopped flashing 
and is lit orange.Turn on the power for all equipment connected to the 
projector.
For a video source, press the [Play] button at the video source to 
start playback if necessary.Press the [Power] button on either the projectors 
control panel or the remote control to turn on the 
power for the projector.
The Power indicator flashes green. After a short period it stops...

28
Turning On the Projector
If more than one signal source has been connected, 
use the projectors control panel or the remote 
control buttons to select the port which the signal 
source that you would like to use is connected to, 
while referring to the following table.
* The items selected using the Input Signal command in the Video 
menu will appear.
Por t
Button to press
Display at top-right 
of screen
Projector
Remote 
control
Computer/
Component VideoThe image 
source changes 
each time 
[Source]...

29
Turning Off the ProjectorFollow the procedure below to turn off the power of the projector.
PROCEDURE
Turn off the power for the signal sources that are 
connected to the projector.
Check that the power for all connected components has been 
turned off.Press the [Power] button on either the projectors 
control panel or the remote control.
The following confirmation message will appear.
If you do not want to turn off the power, press any button except 
the [Power], [Page down] or [Page up] button.
If...